> > If kernel modules are stripped off symbols for some reason
>
> For some reason? Are you kidding? It is by design.
>
I meant that symbols can be stripped for various reasons e.g. if
stripped using --strip-unneeded option.
> > then stack
> > traces in dmesg do not show symbol name for address. It just prints
> > absolute address sometimes (if there is no good match with any symbol)
>
> Yes that is by design.
>
but we can improve it to show the offset from init start or core start
which can help for decoding later.
> > Note RIP: 0010:0xffffffffc06b67ec and 0xffffffffc06b67ec printed in above
> > stack trace as absolute address. There is no easy way in case box crashes
> > as we loose information on load address of specific module.
>
> Mentioning this note makes little sense, just say how the above doesn't help you
> easily identify the root cause of an address, and how this is just part
> of consequences of stripping symbols. Because developers using
> INSTALL_MOD_STRIP="--strip-unneeded" know that they are trading off
> debugging live crashes over reducing the kernel and module binary size.
>
Ok
> > This changes the symbol decoding (in kernel/module.c) such that it can
> > print offset from start of section (.text or .init.text) in case there
> > is no good match with any symbol.
>
> No, this is adding a new heuristic to help in cases where no good match
> for a symbol was found, and typically this can be when symbols are
> stripped.
>
Ok
> > It will now decode address in such cases to [module]+ offset/size or
> > [module __init]+offset/size depending on where the address lies (in
> > core/.text or init/.init.text section of module).
> >
> > One can use objdump/readelf/nm to find symbols with offset from .init.text
> > and .text sections.
> >
> > steps to reproduce the problem:
> > -------------------------------
> > 1. Add WARN_ON_ONCE(1) in module e.g. test_module.c
> > 2. Build and strip the module using --strip-unneeded option
> > 3. Load the module and check RIP in dmesg
> >
> > tests done:
> > -----------
> > 1. Added WARN_ON_ONE(1) in functions of a module for testing
> > -------------------------------------------------------------
> > [ 407.934085] CPU: 0 PID: 2956 Comm: insmod Tainted: G W E 5.16.0-rc5-next-20211220+ #2
> > [ 407.934087] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
> > [ 407.934088] RIP: 0010:[module __init]+0x4/0x7 [test_module]
> > [ 407.934097] Code: Unable to access opcode bytes at RIP 0xffffffffc07edfda.
> > [ 407.934098] RSP: 0018:ffffb21440487c20 EFLAGS: 00010202
> > [ 407.934100] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
> > [ 407.934101] RDX: 0000000000000000 RSI: ffffffff9c38e5e1 RDI: 0000000000000001
> > [ 407.934102] RBP: ffffb21440487c28 R08: 0000000000000000 R09: ffffb21440487a20
> > [ 407.934103] R10: ffffb21440487a18 R11: ffffffff9c755248 R12: ffffffffc07ee007
> > [ 407.934104] R13: ffff92a0f1e260b0 R14: 0000000000000000 R15: 0000000000000000
> > [ 407.934105] FS: 00007f578ebc4400(0000) GS:ffff92a1c0e00000(0000) knlGS:0000000000000000
> > [ 407.934107] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > [ 407.934108] CR2: ffffffffc07edfda CR3: 00000000063ea006 CR4: 00000000000706f0
> > [ 407.934113] Call Trace:
> > [ 407.934114] <TASK>
> > [ 407.934116] ? init_module+0x55/0xff9 [test_module]
> > ...
> > [ 407.934232] CPU: 0 PID: 2956 Comm: insmod Tainted: G W E 5.16.0-rc5-next-20211220+ #2
> > [ 407.934234] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
> > [ 407.934242] RIP: 0010:[module]+0x4/0x7 [test_module]
> > [ 407.934248] Code: Unable to access opcode bytes at RIP 0xffffffffc07e1fda.
> > [ 407.934249] RSP: 0018:ffffb21440487c20 EFLAGS: 00010202
> > [ 407.934251] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
> > [ 407.934252] RDX: 0000000000000000 RSI: ffffffff9c38e5e1 RDI: 0000000000000001
> > [ 407.934253] RBP: ffffb21440487c28 R08: 0000000000000000 R09: ffffb21440487a20
> > [ 407.934254] R10: ffffb21440487a18 R11: ffffffff9c755248 R12: ffffffffc07ee007
> > [ 407.934255] R13: ffff92a0f1e260b0 R14: 0000000000000000 R15: 0000000000000000
> > [ 407.934256] FS: 00007f578ebc4400(0000) GS:ffff92a1c0e00000(0000) knlGS:0000000000000000
> > [ 407.934257] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > [ 407.934258] CR2: ffffffffc07e1fda CR3: 00000000063ea006 CR4: 00000000000706f0
> > [ 407.934260] Call Trace:
> > [ 407.934260] <TASK>
> > [ 407.934261] ? init_module+0x5a/0xff9 [test_module]
> >
> > note that it is able to decode RIP to an offset from module start or
> > init start now.
> >
> > tested on linux->next (tag next-20211220)
> >
> > Signed-off-by: Vimal Agrawal <vimal.agrawal@xxxxxxxxxx>
> > Acked-by: Nishit Shah <nishit.shah@xxxxxxxxxx>
> > Suggested-by: Dirk VanDerMerwe <Dirk.VanDerMerwe@xxxxxxxxxx>
> > ---
> > kernel/module.c | 44 +++++++++++++++++++++++++++++++++++++++-----
> > 1 file changed, 39 insertions(+), 5 deletions(-)
> >
> > diff --git a/kernel/module.c b/kernel/module.c
> > index 24dab046e16c..635e631c92f1 100644
> > --- a/kernel/module.c
> > +++ b/kernel/module.c
> > @@ -4260,6 +4260,19 @@ static const char *kallsyms_symbol_name(struct mod_kallsyms *kallsyms, unsigned
> > return kallsyms->strtab + kallsyms->symtab[symnum].st_name;
> > }
> >
> > +/*
> > + * Check if module address (addr) passed is as per init passed
> > + * if init is true then check in init layout
> > + * else check in core layout
> > + */
> > +bool match_address_layout(struct module *mod, unsigned long addr, bool init)
> > +{
> > + if (init)
> > + return within_module_init(addr, mod);
> > + else
> > + return within_module_core(addr, mod);
> > +}
> > +
> > /*
> > * Given a module and address, find the corresponding symbol and return its name
> > * while providing its size and offset if needed.
> > @@ -4270,14 +4283,22 @@ static const char *find_kallsyms_symbol(struct module *mod,
> > unsigned long *offset)
> > {
> > unsigned int i, best = 0;
> > - unsigned long nextval, bestval;
> > + unsigned long baseval, nextval, bestval;
> > struct mod_kallsyms *kallsyms = rcu_dereference_sched(mod->kallsyms);
> > + char *module_base_name;
> > + bool is_init_address = false;
> >
> > /* At worse, next value is at end of module */
> > - if (within_module_init(addr, mod))
> > + if (within_module_init(addr, mod)) {
> > + baseval = (unsigned long)mod->init_layout.base;
> > nextval = (unsigned long)mod->init_layout.base+mod->init_layout.text_size;
> > - else
> > + module_base_name = "[module __init]";
> > + is_init_address = true;
> > + } else {
> > + baseval = (unsigned long)mod->core_layout.base;
> > nextval = (unsigned long)mod->core_layout.base+mod->core_layout.text_size;
> > + module_base_name = "[module]";
> > + }
> >
>
>
> To make all this readible and easier to follow please break down your
> work into 3 patches:
>
> 1) You add the above branch and add baseval as you do now and you also
> use it on the nextval assigmment. So something like this:
>
> + baseval = (unsigned long)mod->init_layout.base;
> - nextval = (unsigned long)mod->init_layout.base+mod->init_layout.text_size;
> + nextval = baseval + mod->init_layout.text_size;
>
> You would do that for the core_layout branch too.
>
> This would make only one single change to the code. That is just one
> patch. And that patch introduces no functional changes. You would
> clarify that on the commit log, to make it clear there is no possible
> regression risks with it.
>
> > bestval = kallsyms_symbol_value(&kallsyms->symtab[best]);
> >
> > @@ -4300,7 +4321,8 @@ static const char *find_kallsyms_symbol(struct module *mod,
> > || is_arm_mapping_symbol(kallsyms_symbol_name(kallsyms, i)))
> > continue;
> >
> > - if (thisval <= addr && thisval > bestval) {
> > + if ((thisval <= addr && thisval > bestval) &&
> > + (match_address_layout(mod, thisval, is_init_address))) {
>
> OK your 2nd patch will be:
>
> 2) You add match_address_layout() and the is_init_address bool. This is
> a fix found through code inspection. You can clarify that the issue has
> only been found when --strip-unneeded is used, however, that the fix
> could potentialy solve other false symbol. At this point in time no
> known cases are known where the reported symbol returned is invalid,
> but this sanity check makes sense even for cases where no striping is
> used. You can also mention that you this fix is also being added to
> be able to add a new heuristic later for cases where --strip-unneeded
> is used.
>
> > best = i;
> > bestval = thisval;
> > }
> > @@ -4308,8 +4330,20 @@ static const char *find_kallsyms_symbol(struct module *mod,
> > nextval = thisval;
> > }
> >
> > - if (!best)
> > + if (!best) {
> > + if (is_module_text_address(addr)) {
> > + /*
> > + * return MODULE base and offset if we could not find
> > + * any best match for text address
> > + */
> > + if (size)
> > + *size = nextval - baseval;
> > + if (offset)
> > + *offset = addr - baseval;
> > + return module_base_name;
> > + }
> > return NULL;
>
> And then patch 3 is this new change. Please test the config I sent you
> though, I have not been able to reproduce your setup yet.
>
> Luis
sure I will do as suggested. Thanks.
Vimal
