The use of IS_ENABLED in C code (vs just in CPP #if directives)
causes us to carry the burden of a huge autoconf.h file. It is
also misleading in that a casual inspection of the code would
leave one thinking that the if statements were evaluated at
runtime, when TX_FLOW is a Kconfig bool and hence evaluated
at configure time as an either/or.
Signed-off-by: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
---
drivers/net/ethernet/wiznet/w5100.c | 9 ++++++---
drivers/net/ethernet/wiznet/w5300.c | 18 ++++++++++++------
2 files changed, 18 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/wiznet/w5100.c b/drivers/net/ethernet/wiznet/w5100.c
index c28e1d5..fdac57d 100644
--- a/drivers/net/ethernet/wiznet/w5100.c
+++ b/drivers/net/ethernet/wiznet/w5100.c
@@ -441,8 +441,9 @@ static int w5100_start_tx(struct sk_buff *skb, struct net_device *ndev)
struct w5100_priv *priv = netdev_priv(ndev);
u16 offset;
- if (IS_ENABLED(CONFIG_WIZNET_TX_FLOW))
- netif_stop_queue(ndev);
+#ifdef CONFIG_WIZNET_TX_FLOW
+ netif_stop_queue(ndev);
+#endif
offset = w5100_read16(priv, W5100_S0_TX_WR);
w5100_writebuf(priv, offset, skb->data, skb->len);
@@ -517,10 +518,12 @@ static irqreturn_t w5100_interrupt(int irq, void *ndev_instance)
w5100_write(priv, W5100_S0_IR, ir);
mmiowb();
- if (IS_ENABLED(CONFIG_WIZNET_TX_FLOW) && (ir & S0_IR_SENDOK)) {
+#ifdef CONFIG_WIZNET_TX_FLOW
+ if (ir & S0_IR_SENDOK) {
netif_dbg(priv, tx_done, ndev, "tx done\n");
netif_wake_queue(ndev);
}
+#endif
if (ir & S0_IR_RECV) {
if (napi_schedule_prep(&priv->napi)) {
diff --git a/drivers/net/ethernet/wiznet/w5300.c b/drivers/net/ethernet/wiznet/w5300.c
index 88afde9..294b3fd 100644
--- a/drivers/net/ethernet/wiznet/w5300.c
+++ b/drivers/net/ethernet/wiznet/w5300.c
@@ -73,6 +73,11 @@ MODULE_LICENSE("GPL");
#define W5300_S0_IR 0x0206 /* S0 Interrupt Register */
#define S0_IR_RECV 0x0004 /* Receive interrupt */
#define S0_IR_SENDOK 0x0010 /* Send OK interrupt */
+#ifdef CONFIG_WIZNET_TX_FLOW
+#define S0_IR_FLAGS (S0_IR_RECV | S0_IR_SENDOK)
+#else
+#define S0_IR_FLAGS S0_IR_RECV
+#endif
#define W5300_S0_SSR 0x0208 /* S0 Socket Status Register */
#define W5300_S0_TX_WRSR 0x0220 /* S0 TX Write Size Register */
#define W5300_S0_TX_FSR 0x0224 /* S0 TX Free Size Register */
@@ -273,9 +278,7 @@ static void w5300_hw_start(struct w5300_priv *priv)
S0_MR_MACRAW : S0_MR_MACRAW_MF);
mmiowb();
w5300_command(priv, S0_CR_OPEN);
- w5300_write(priv, W5300_S0_IMR, IS_ENABLED(CONFIG_WIZNET_TX_FLOW) ?
- S0_IR_RECV | S0_IR_SENDOK :
- S0_IR_RECV);
+ w5300_write(priv, W5300_S0_IMR, S0_IR_FLAGS);
w5300_write(priv, W5300_IMR, IR_S0);
mmiowb();
}
@@ -371,8 +374,9 @@ static int w5300_start_tx(struct sk_buff *skb, struct net_device *ndev)
{
struct w5300_priv *priv = netdev_priv(ndev);
- if (IS_ENABLED(CONFIG_WIZNET_TX_FLOW))
- netif_stop_queue(ndev);
+#ifdef CONFIG_WIZNET_TX_FLOW
+ netif_stop_queue(ndev);
+#endif
w5300_write_frame(priv, skb->data, skb->len);
mmiowb();
@@ -439,10 +443,12 @@ static irqreturn_t w5300_interrupt(int irq, void *ndev_instance)
w5300_write(priv, W5300_S0_IR, ir);
mmiowb();
- if (IS_ENABLED(CONFIG_WIZNET_TX_FLOW) && (ir & S0_IR_SENDOK)) {
+#ifdef CONFIG_WIZNET_TX_FLOW
+ if (ir & S0_IR_SENDOK) {
netif_dbg(priv, tx_done, ndev, "tx done\n");
netif_wake_queue(ndev);
}
+#endif
if (ir & S0_IR_RECV) {
if (napi_schedule_prep(&priv->napi)) {
--
1.7.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kbuild" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
