Re: [PATCH v8 2/4] KEYS: trusted: Introduce TEE based Trusted Keys

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 21, 2021 at 05:07:42PM +0200, Jarkko Sakkinen wrote:
> On Thu, Jan 21, 2021 at 09:44:07AM +0100, Jerome Forissier wrote:
> > 
> > 
> > On 1/21/21 1:02 AM, Jarkko Sakkinen via OP-TEE wrote:
> > > On Wed, Jan 20, 2021 at 12:53:28PM +0530, Sumit Garg wrote:
> > >> On Wed, 20 Jan 2021 at 07:01, Jarkko Sakkinen <jarkko@xxxxxxxxxx> wrote:
> > >>>
> > >>> On Tue, Jan 19, 2021 at 12:30:42PM +0200, Jarkko Sakkinen wrote:
> > >>>> On Fri, Jan 15, 2021 at 11:32:31AM +0530, Sumit Garg wrote:
> > >>>>> On Thu, 14 Jan 2021 at 07:35, Jarkko Sakkinen <jarkko@xxxxxxxxxx> wrote:
> > >>>>>>
> > >>>>>> On Wed, Jan 13, 2021 at 04:47:00PM +0530, Sumit Garg wrote:
> > >>>>>>> Hi Jarkko,
> > >>>>>>>
> > >>>>>>> On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen <jarkko@xxxxxxxxxx> wrote:
> > >>>>>>>>
> > >>>>>>>> On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote:
> > >>>>>>>>> Add support for TEE based trusted keys where TEE provides the functionality
> > >>>>>>>>> to seal and unseal trusted keys using hardware unique key.
> > >>>>>>>>>
> > >>>>>>>>> Refer to Documentation/tee.txt for detailed information about TEE.
> > >>>>>>>>>
> > >>>>>>>>> Signed-off-by: Sumit Garg <sumit.garg@xxxxxxxxxx>
> > >>>>>>>>
> > >>>>>>>> I haven't yet got QEMU environment working with aarch64, this produces
> > >>>>>>>> just a blank screen:
> > >>>>>>>>
> > >>>>>>>> ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio
> > >>>>>>>>
> > >>>>>>>> My BuildRoot fork for TPM and keyring testing is located over here:
> > >>>>>>>>
> > >>>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/
> > >>>>>>>>
> > >>>>>>>> The "ARM version" is at this point in aarch64 branch. Over time I will
> > >>>>>>>> define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then
> > >>>>>>>> in the master branch.
> > >>>>>>>>
> > >>>>>>>> To create identical images you just need to
> > >>>>>>>>
> > >>>>>>>> $ make tpmdd_defconfig && make
> > >>>>>>>>
> > >>>>>>>> Can you check if you see anything obviously wrong? I'm eager to test this
> > >>>>>>>> patch set, and in bigger picture I really need to have ready to run
> > >>>>>>>> aarch64 environment available.
> > >>>>>>>
> > >>>>>>> I would rather suggest you to follow steps listed here [1] as to test
> > >>>>>>> this feature on Qemu aarch64 we need to build firmwares such as TF-A,
> > >>>>>>> OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build
> > >>>>>>> system [2]. And then it would be easier to migrate them to your
> > >>>>>>> buildroot environment as well.
> > >>>>>>>
> > >>>>>>> [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html
> > >>>>>>> [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8
> > >>>>>>>
> > >>>>>>> -Sumit
> > >>>>>>
> > >>>>>> Can you provide 'keyctl_change'? Otherwise, the steps are easy to follow.
> > >>>>>>
> > >>>>>
> > >>>>> $ cat keyctl_change
> > >>>>> diff --git a/common.mk b/common.mk
> > >>>>> index aeb7b41..663e528 100644
> > >>>>> --- a/common.mk
> > >>>>> +++ b/common.mk
> > >>>>> @@ -229,6 +229,7 @@ BR2_PACKAGE_OPTEE_TEST_SDK ?= $(OPTEE_OS_TA_DEV_KIT_DIR)
> > >>>>>  BR2_PACKAGE_OPTEE_TEST_SITE ?= $(OPTEE_TEST_PATH)
> > >>>>>  BR2_PACKAGE_STRACE ?= y
> > >>>>>  BR2_TARGET_GENERIC_GETTY_PORT ?= $(if
> > >>>>> $(CFG_NW_CONSOLE_UART),ttyAMA$(CFG_NW_CONSOLE_UART),ttyAMA0)
> > >>>>> +BR2_PACKAGE_KEYUTILS := y
> > >>>>>
> > >>>>>  # All BR2_* variables from the makefile or the environment are appended to
> > >>>>>  # ../out-br/extra.conf. All values are quoted "..." except y and n.
> > >>>>> diff --git a/kconfigs/qemu.conf b/kconfigs/qemu.conf
> > >>>>> index 368c18a..832ab74 100644
> > >>>>> --- a/kconfigs/qemu.conf
> > >>>>> +++ b/kconfigs/qemu.conf
> > >>>>> @@ -20,3 +20,5 @@ CONFIG_9P_FS=y
> > >>>>>  CONFIG_9P_FS_POSIX_ACL=y
> > >>>>>  CONFIG_HW_RANDOM=y
> > >>>>>  CONFIG_HW_RANDOM_VIRTIO=y
> > >>>>> +CONFIG_TRUSTED_KEYS=y
> > >>>>> +CONFIG_ENCRYPTED_KEYS=y
> > >>>>>
> > >>>>>> After I've successfully tested 2/4, I'd suggest that you roll out one more
> > >>>>>> version and CC the documentation patch to Elaine and Mini, and clearly
> > >>>>>> remark in the commit message that TEE is a standard, with a link to the
> > >>>>>> specification.
> > >>>>>>
> > >>>>>
> > >>>>> Sure, I will roll out the next version after your testing.
> > >>>>
> > >>>> Thanks, I'll try this at instant, and give my feedback.
> > >>>
> > >>> I bump into this:
> > >>>
> > >>> $ make run-only
> > >>> ln -sf /home/jarkko/devel/tpm/optee/build/../out-br/images/rootfs.cpio.gz /home/jarkko/devel/tpm/optee/build/../out/bin/
> > >>> ln: failed to create symbolic link '/home/jarkko/devel/tpm/optee/build/../out/bin/': No such file or directory
> > >>> make: *** [Makefile:194: run-only] Error 1
> > >>>
> > >>
> > >> Could you check if the following directory tree is built after
> > >> executing the below command?
> > >>
> > >> $ make -j`nproc`
> > >> CFG_IN_TREE_EARLY_TAS=trusted_keys/f04a0fe7-1f5d-4b9b-abf7-619b85b4ce8c
> > >>
> > >> $ tree out/bin/
> > >> out/bin/
> > >> ├── bl1.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl1.bin
> > >> ├── bl2.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl2.bin
> > >> ├── bl31.bin ->
> > >> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl31.bin
> > >> ├── bl32.bin ->
> > >> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-header_v2.bin
> > >> ├── bl32_extra1.bin ->
> > >> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pager_v2.bin
> > >> ├── bl32_extra2.bin ->
> > >> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pageable_v2.bin
> > >> ├── bl33.bin ->
> > >> /home/sumit/build/optee/build/../edk2/Build/ArmVirtQemuKernel-AARCH64/RELEASE_GCC49/FV/QEMU_EFI.fd
> > >> ├── Image -> /home/sumit/build/optee/build/../linux/arch/arm64/boot/Image
> > >> └── rootfs.cpio.gz ->
> > >> /home/sumit/build/optee/build/../out-br/images/rootfs.cpio.gz
> > >>
> > >> 0 directories, 9 files
> > >>
> > >> -Sumit
> > > 
> > > I actually spotted a build error that was unnoticed last time:
> > > 
> > > make[2]: Entering directory '/home/jarkko/devel/tpm/optee/edk2/BaseTools/Tests'
> > > /bin/sh: 1: python: not found
> > > 
> > > I'd prefer not to install Python2. It has been EOL over a year.
> > 
> > AFAIK, everything should build fine with Python3. On my Ubuntu 20.04
> > machine, this is accomplished by installing package "python-is-python3"
> > (after uninstalling "python-is-python2" if need be).
> > 
> > $ ls -l /usr/bin/python
> > lrwxrwxrwx 1 root root 7 Apr 15  2020 /usr/bin/python -> python3
> 
> Right, just found about this in unrelated context :-) [*]
> 
> Hope this will work out...
> 
> [*] https://github.com/surge-synthesizer/surge/pull/3655

Now I get

Traceback (most recent call last):
  File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 36, in <module>
    allTests = GetAllTestsSuite()
  File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 33, in GetAllTestsSuite
    return unittest.TestSuite([GetCTestSuite(), GetPythonTestSuite()])
  File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 25, in GetCTestSuite
    import CToolsTests
  File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/CToolsTests.py", line 22, in <module>
    import TianoCompress
  File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TianoCompress.py", line 69, in <module>
    TheTestSuite = TestTools.MakeTheTestSuite(locals())
  File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TestTools.py", line 43, in MakeTheTestSuite
    for name, item in localItems.iteritems():
AttributeError: 'dict' object has no attribute 'iteritems'

/Jarkko



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux Kernel]     [Linux Kernel Hardening]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux SCSI]

  Powered by Linux