Hello, This is a redesigned version of the fs-verity patchset, implementing Ted's suggestion to build the Merkle tree in the kernel (https://lore.kernel.org/linux-fsdevel/20190207031101.GA7387@xxxxxxx/). This greatly simplifies the UAPI, since the verity metadata no longer needs to be transferred to the kernel. Now to enable fs-verity on a file, one simply calls FS_IOC_ENABLE_VERITY, passing it this structure: struct fsverity_enable_arg { __u32 version; __u32 hash_algorithm; __u32 block_size; __u32 salt_size; __u64 salt_ptr; __u32 sig_size; __u32 __reserved1; __u64 sig_ptr; __u64 __reserved2[11]; }; The filesystem then builds the file's Merkle tree and stores it in a filesystem-specific location associated with the file. Afterwards, FS_IOC_MEASURE_VERITY can be used to retrieve the file measurement ("root hash"). The way the file measurement is computed is also effectively part of the API (it has to be), but it's logically independent of where/how the filesystem stores the Merkle tree. The API is fully documented in Documentation/filesystems/fsverity.rst, along with other aspects of fs-verity. I also added an FAQ section that answers frequently asked questions about fs-verity, e.g. why isn't it all at the VFS level, why isn't it part of IMA, why does the Merkle tree need to be stored on-disk, etc. Overview -------- This patchset implements fs-verity for ext4 and f2fs. fs-verity is similar to dm-verity, but implemented on a per-file basis: a Merkle tree is used to measure (hash) a read-only file's data as it is paged in. ext4 and f2fs hide this Merkle tree beyond the end of the file, but other filesystems can implement it differently if desired. In general, fs-verity is intended for use on writable filesystems; dm-verity is still recommended on read-only ones. Similar to fscrypt, most of the code is in fs/verity/, and not too many filesystem-specific changes are needed. The Merkle tree is built by the filesystem when the FS_IOC_ENABLE_VERITY ioctl is executed. fs-verity provides a file measurement (hash) in constant time and verifies data on-demand. Thus, it is useful for efficiently verifying the authenticity of large files of which only a small portion may be accessed, such as Android application package (APK) files. It may also be useful in "audit" use cases where file hashes are logged. fs-verity can also provide better protection against malicious disks than an ahead-of-time hash, since fs-verity re-verifies data each time it's paged in. Note, however, that any authenticity guarantee is still dependent on verification of the file measurement and other relevant metadata in a way that makes sense for the overall system; fs-verity is only a tool to help with this. This patchset doesn't include IMA support for fs-verity file measurements. This is planned and we'd like to collaborate with the IMA maintainers. Although fs-verity can be used on its own without IMA, fs-verity is primarily a lower level feature (think of it as a way of hashing a file), so some users may still need IMA's policy mechanism. However, an optional in-kernel signature verification mechanism within fs-verity itself is also included. This patchset is based on v5.2-rc3. It can also be found in git at tag fsverity_2019-06-20 of: https://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux.git fs-verity has a userspace utility: https://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/fsverity-utils.git xfstests for fs-verity can be found at branch "fsverity" of: https://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/xfstests-dev.git fs-verity is supported by f2fs-tools v1.11.0+ and e2fsprogs v1.45.2+. Examples of setting up fs-verity protected files can be found in the README.md file of fsverity-utils. Other useful references include: - Documentation/filesystems/fsverity.rst, added by the first patch. - LWN coverage of v3 patchset: https://lwn.net/Articles/790185/ - LWN coverage of v2 patchset: https://lwn.net/Articles/775872/ - LWN coverage of v1 patchset: https://lwn.net/Articles/763729/ - Presentation at Linux Security Summit North America 2018: - Slides: https://schd.ws/hosted_files/lssna18/af/fs-verity%20slide%20deck.pdf - Video: https://www.youtube.com/watch?v=Aw5h6aBhu6M (This corresponded to the v1 patchset; changes have been made since then.) - LWN coverage of LSFMM 2018 discussion: https://lwn.net/Articles/752614/ Changed since v4: - Made ext4 and f2fs store the verity metadata beginning at a 64K aligned boundary, to be ready for architectures with 64K pages. - Made ext4 store the verity descriptor size in the file data stream, so that no xattr is needed. - Added support for empty files. - A few minor cleanups. Changed since v3: - The FS_IOC_GETFLAGS ioctl now returns the verity flag. - Fixed setting i_verity_info too early. - Restored pagecache invalidation in FS_IOC_ENABLE_VERITY. - Fixed truncation of fsverity_enable_arg::hash_algorithm. - Reject empty files for both open and enable, not just enable. - Added a couple more FAQ entries to the documentation. - A few minor cleanups. - Rebased onto v5.2-rc3. Changed since v2: - Large redesign: the Merkle tree is now built by FS_IOC_ENABLE_VERITY, rather than being provided by userspace. The fsverity_operations provide an interface for filesystems to read and write the Merkle tree from/to a filesystem-specific location. - Lot of refactoring, cleanups, and documentation improvements. - Many simplifications, such as simplifying the fsverity_descriptor format, dropping CRC-32 support, and limiting the salt size. - ext4 and f2fs now store an xattr that gives the location of the fsverity_descriptor, so loading it is more straightforward. - f2fs no longer counts the verity metadata in the on-disk i_size, making it consistent with ext4. - Replaced the filesystem-specific fs-verity kconfig options with CONFIG_FS_VERITY. - Replaced the filesystem-specific verity bit checks with IS_VERITY(). Changed since v1: - Added documentation file. - Require write permission for FS_IOC_ENABLE_VERITY, rather than CAP_SYS_ADMIN. - Eliminated dependency on CONFIG_BLOCK and clarified that filesystems can verify a page at a time rather than a bio at a time. - Fixed conditions for verifying holes. - ext4 now only allows fs-verity on extent-based files. - Eliminated most of the assumptions that the verity metadata is stored beyond EOF, in case filesystems want to do things differently. - Other cleanups. Eric Biggers (16): fs-verity: add a documentation file fs-verity: add MAINTAINERS file entry fs-verity: add UAPI header fs: uapi: define verity bit for FS_IOC_GETFLAGS fs-verity: add Kconfig and the helper functions for hashing fs-verity: add inode and superblock fields fs-verity: add the hook for file ->open() fs-verity: add the hook for file ->setattr() fs-verity: add data verification hooks for ->readpages() fs-verity: implement FS_IOC_ENABLE_VERITY ioctl fs-verity: implement FS_IOC_MEASURE_VERITY ioctl fs-verity: add SHA-512 support fs-verity: support builtin file signatures ext4: add basic fs-verity support ext4: add fs-verity read support f2fs: add fs-verity support Documentation/filesystems/fsverity.rst | 710 +++++++++++++++++++++++++ Documentation/filesystems/index.rst | 1 + Documentation/ioctl/ioctl-number.txt | 1 + MAINTAINERS | 12 + fs/Kconfig | 2 + fs/Makefile | 1 + fs/ext4/Makefile | 1 + fs/ext4/ext4.h | 23 +- fs/ext4/file.c | 4 + fs/ext4/inode.c | 48 +- fs/ext4/ioctl.c | 12 + fs/ext4/readpage.c | 207 ++++++- fs/ext4/super.c | 18 +- fs/ext4/sysfs.c | 6 + fs/ext4/verity.c | 354 ++++++++++++ fs/f2fs/Makefile | 1 + fs/f2fs/data.c | 72 ++- fs/f2fs/f2fs.h | 23 +- fs/f2fs/file.c | 40 ++ fs/f2fs/inode.c | 5 +- fs/f2fs/super.c | 3 + fs/f2fs/sysfs.c | 11 + fs/f2fs/verity.c | 233 ++++++++ fs/f2fs/xattr.h | 2 + fs/verity/Kconfig | 55 ++ fs/verity/Makefile | 10 + fs/verity/enable.c | 355 +++++++++++++ fs/verity/fsverity_private.h | 185 +++++++ fs/verity/hash_algs.c | 279 ++++++++++ fs/verity/init.c | 61 +++ fs/verity/measure.c | 57 ++ fs/verity/open.c | 357 +++++++++++++ fs/verity/signature.c | 207 +++++++ fs/verity/verify.c | 281 ++++++++++ include/linux/fs.h | 11 + include/linux/fsverity.h | 209 ++++++++ include/uapi/linux/fs.h | 1 + include/uapi/linux/fsverity.h | 40 ++ 38 files changed, 3839 insertions(+), 59 deletions(-) create mode 100644 Documentation/filesystems/fsverity.rst create mode 100644 fs/ext4/verity.c create mode 100644 fs/f2fs/verity.c create mode 100644 fs/verity/Kconfig create mode 100644 fs/verity/Makefile create mode 100644 fs/verity/enable.c create mode 100644 fs/verity/fsverity_private.h create mode 100644 fs/verity/hash_algs.c create mode 100644 fs/verity/init.c create mode 100644 fs/verity/measure.c create mode 100644 fs/verity/open.c create mode 100644 fs/verity/signature.c create mode 100644 fs/verity/verify.c create mode 100644 include/linux/fsverity.h create mode 100644 include/uapi/linux/fsverity.h -- 2.22.0.410.gd8fdbe21b5-goog
