On Tue, 26 Feb 2019 at 13:14, Mimi Zohar <zohar@xxxxxxxxxxxxx> wrote:
>
> On Tue, 2019-02-26 at 10:12 +0200, Markku Savela wrote:
> > In case anyone is interested, I got IMA to accept TPM chip in my special
> > case (linaro optee kernel) by changing
> >
> > clk-bcm2835.c: core_initcall -> susbsys_initcall
> > raspberrypi.c: subsys_initcall -> core_initcall
> >
> > At first check, the system seems to be ok. Maybe some combination of
> > initcalls could work, but this is enough for me.
>
> Thank you for sharing this!
>
> Mimi
>
Hi Mimi, Markku,
I am not sure why I am being cc'ed on this thread, or if there is
anything particular you would like my opinion on.
In general, having to juggle initcall ordering like this is horrid, so
while useful as a data point, I'd prefer fixing it properly instead.
I.e., if the firmware driver relies on a clock having been enabled,
this should be reflected in the DT, and supported in the firmware
driver by deferring the probe until the clock becomes available.
> >
> > diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
> > index d6caac9c3..7cdd597f1 100644
> > --- a/drivers/clk/bcm/clk-bcm2835.c
> > +++ b/drivers/clk/bcm/clk-bcm2835.c
> > @@ -2330,7 +2330,7 @@ static int __init __bcm2835_clk_driver_init(void)
> > {
> > return platform_driver_register(&bcm2835_clk_driver);
> > }
> > -core_initcall(__bcm2835_clk_driver_init);
> > +subsys_initcall(__bcm2835_clk_driver_init);
> >
> > MODULE_AUTHOR("Eric Anholt <eric@xxxxxxxxxx>");
> > MODULE_DESCRIPTION("BCM2835 clock driver");
> > diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c
> > index a82819a78..dfa362e1c 100644
> > --- a/drivers/firmware/raspberrypi.c
> > +++ b/drivers/firmware/raspberrypi.c
> > @@ -457,7 +457,7 @@ static int __init rpi_firmware_init(void)
> > out1:
> > return ret;
> > }
> > -subsys_initcall(rpi_firmware_init);
> > +core_initcall(rpi_firmware_init);
> >
> > static void __init rpi_firmware_exit(void)
> > {
>
