Re: IMA fails to see TPM chip (rpi3, linaro optee)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[ Cc'ing Peter ]

On Thu, 2019-02-21 at 11:08 +0200, Markku Savela wrote:
> On 20/02/2019 10:14, Markku Savela wrote:
> > No hints how to solve? Anybody?
> 
> I changed IMA to just ignore the tpm test in hope that TPM would be 
> ready by the time IMA needs it -- no such luck, the "tpm2_probe", which 
> triggers the manual start just comes too late. I could just force the 
> manual startup earlier in boot, if I could figure out a proper place to 
> put the function call...
> 
> 
> [    4.008322] ima: Allocated hash algorithm: sha1
> [    4.012820] ima: Error Communicating to TPM chip
> [    4.017302] ima: Error Communicating to TPM chip
> [    4.021763] ima: Error Communicating to TPM chip
> [    4.026004] ima: Error Communicating to TPM chip
> [    4.030295] ima: Error Communicating to TPM chip
> [    4.034558] ima: Error Communicating to TPM chip
> [    4.038766] ima: Error Communicating to TPM chip
> [    4.042805] ima: Error Communicating to TPM chip
> [    4.046951] ima: Error Communicating to TPM chip, result: -19
> [    4.059431] uart-pl011 3f201000.serial: cts_event_workaround enabled
> [    4.063766] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 72, 
> base_baud = 0) is a PL011 rev2
> [    4.069963] console [ttyS0] disabled
> [    4.074178] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 151, base_baud 
> = 31250000) is a 16550
> [    5.282479] console [ttyS0] enabled
> [    5.293360] Indeed it is in host mode hprt0 = 00021501
> [    5.308808] tpm2_probe cmd rc=256
> [    5.322282] tpm_tis_spi spi0.1: 2.0 TPM (device-id 0x1B, rev-id 22)
> [    5.358842] tpm tpm0: A TPM error (256) occurred continue selftest
> [    5.378137] tpm tpm0: starting up the TPM manually
> 
> 
> Earlier in boot there this "spi-bcm2835" notice. Is this the reason the 
> probe gets delayed?
> 
> [    3.440240] Loading iSCSI transport class v2.0-870.
> [    3.442267] spi-bcm2835 3f204000.spi: could not get clk: -517
> [    3.442804] libphy: Fixed MDIO Bus: probed
> [    3.443019] usbcore: registered new interface driver lan78xx
> [
> 

This problem was previously discussed here -
https://lore.kernel.org/linux-integrity/trinity-3e6c2430-417d-4eef-b06
7-e30d68592b4d-1506716047790@3c-app-gmx-bs69/

Mimi





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux Kernel]     [Linux Kernel Hardening]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux SCSI]

  Powered by Linux