The quirks variable and the I2C_HID_QUIRK_ defines are never used / exported outside of the i2c-hid code renumber them to start at BIT(0) again. Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- drivers/hid/i2c-hid/i2c-hid-core.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c index 3bdfd3e89de5..151d5a5c87ca 100644 --- a/drivers/hid/i2c-hid/i2c-hid-core.c +++ b/drivers/hid/i2c-hid/i2c-hid-core.c @@ -44,11 +44,11 @@ #include "i2c-hid.h" /* quirks to control the device */ -#define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(1) -#define I2C_HID_QUIRK_BOGUS_IRQ BIT(4) -#define I2C_HID_QUIRK_RESET_ON_RESUME BIT(5) -#define I2C_HID_QUIRK_BAD_INPUT_SIZE BIT(6) -#define I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET BIT(7) +#define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(0) +#define I2C_HID_QUIRK_BOGUS_IRQ BIT(1) +#define I2C_HID_QUIRK_RESET_ON_RESUME BIT(2) +#define I2C_HID_QUIRK_BAD_INPUT_SIZE BIT(3) +#define I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET BIT(4) /* Command opcodes */ #define I2C_HID_OPCODE_RESET 0x01 -- 2.41.0
