Re-trying the power-on command on failure on all devices should
not be a problem, drop the I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV quirk
and simply retry power-on on all devices.
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/hid/i2c-hid/i2c-hid-core.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 96fb5aafc1fa..3bdfd3e89de5 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -44,7 +44,6 @@
#include "i2c-hid.h"
/* quirks to control the device */
-#define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV BIT(0)
#define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(1)
#define I2C_HID_QUIRK_BOGUS_IRQ BIT(4)
#define I2C_HID_QUIRK_RESET_ON_RESUME BIT(5)
@@ -120,8 +119,6 @@ static const struct i2c_hid_quirks {
__u16 idProduct;
__u32 quirks;
} i2c_hid_quirks[] = {
- { USB_VENDOR_ID_WEIDA, HID_ANY_ID,
- I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
{ I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288,
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET },
{ I2C_VENDOR_ID_ITE, I2C_DEVICE_ID_ITE_VOYO_WINPAD_A15,
@@ -395,8 +392,7 @@ static int i2c_hid_set_power(struct i2c_hid *ihid, int power_state)
* The call will get a return value (EREMOTEIO) but device will be
* triggered and activated. After that, it goes like a normal device.
*/
- if (power_state == I2C_HID_PWR_ON &&
- ihid->quirks & I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV) {
+ if (power_state == I2C_HID_PWR_ON) {
ret = i2c_hid_set_power_command(ihid, I2C_HID_PWR_ON);
/* Device was already activated */
--
2.41.0
