[PATCH 6/7] HID: i2c-hid: Remove I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV quirk

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Re-trying the power-on command on failure on all devices should
not be a problem, drop the I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV quirk
and simply retry power-on on all devices.

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
 drivers/hid/i2c-hid/i2c-hid-core.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index df5577fc73c5..ff2659bf5e57 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -44,7 +44,6 @@
 #include "i2c-hid.h"
 
 /* quirks to control the device */
-#define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV	BIT(0)
 #define I2C_HID_QUIRK_BOGUS_IRQ			BIT(4)
 #define I2C_HID_QUIRK_RESET_ON_RESUME		BIT(5)
 #define I2C_HID_QUIRK_BAD_INPUT_SIZE		BIT(6)
@@ -119,8 +118,6 @@ static const struct i2c_hid_quirks {
 	__u16 idProduct;
 	__u32 quirks;
 } i2c_hid_quirks[] = {
-	{ USB_VENDOR_ID_WEIDA, HID_ANY_ID,
-		I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
 	{ USB_VENDOR_ID_ALPS_JP, HID_ANY_ID,
 		 I2C_HID_QUIRK_RESET_ON_RESUME },
 	{ I2C_VENDOR_ID_SYNAPTICS, I2C_PRODUCT_ID_SYNAPTICS_SYNA2393,
@@ -388,8 +385,7 @@ static int i2c_hid_set_power(struct i2c_hid *ihid, int power_state)
 	 * The call will get a return value (EREMOTEIO) but device will be
 	 * triggered and activated. After that, it goes like a normal device.
 	 */
-	if (power_state == I2C_HID_PWR_ON &&
-	    ihid->quirks & I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV) {
+	if (power_state == I2C_HID_PWR_ON) {
 		ret = i2c_hid_set_power_command(ihid, I2C_HID_PWR_ON);
 
 		/* Device was already activated */
-- 
2.41.0




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux