Hi All, Looking at: "2247751 - Touchpad not working on Lenovo Thinkbook 15 Gen 5" https://bugzilla.redhat.com/show_bug.cgi?id=2247751 I thought at first that this was another touchpad needing a I2C_HID_QUIRK_NO_IRQ_AFTER_RESET quirk, further testing has shown this seems to be an IRQ not working issue though, so this series does not help for that bug. The bug has made me revisit I2C_HID_QUIRK_NO_IRQ_AFTER_RESET though and it made me look at Microsoft's i2c-hid docs again and I noticed the following: """ 4. Issue a RESET (Host Initiated Reset) to the Device. 5. Retrieve report descriptor from the device. Note: Steps 4 and 5 may be done in parallel to optimize for time on I²C. Since report descriptors are (a) static and (b) quite long, Windows 8 may issue a request for 5 while it is waiting for a response from the device on 4. """ which made me think that maybe on some touchpads the reset ack is delayed till after the report descriptor is read ? Testing a T-BAO Tbook Air 12.5 with a 0911:5288 (SIPODEV SP1064?) touchpad, for which the I2C_HID_QUIRK_NO_IRQ_AFTER_RESET quirk was first introduced, shows that about 1 ms after the report descriptor read finishes the reset indeed does get acked. So this series refactors the reset handling to move the waiting for the ack to after reading the report-descriptor, so that the I2C_HID_QUIRK_NO_IRQ_AFTER_RESET quirk is no longer necessary. Julian, I've added you to the Cc because you developed the code for touchpads where the HID report descriptors are missing and are provided by the kernel through a DMI quirk. The behavior for these touchpads should be unchanged, but if you can test on a laptop with such a touchpad that would be great. Regards, Hans Hans de Goede (7): HID: i2c-hid: Fold i2c_hid_execute_reset() into i2c_hid_hwreset() HID: i2c-hid: Split i2c_hid_hwreset() in start() and finish() functions HID: i2c-hid: Switch i2c_hid_parse() to goto style error handling HID: i2c-hid: Move i2c_hid_finish_hwreset() to after reading the report-descriptor HID: i2c-hid: Remove I2C_HID_QUIRK_NO_IRQ_AFTER_RESET quirks HID: i2c-hid: Remove I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV quirk HID: i2c-hid: Renumber I2C_HID_QUIRK_ defines drivers/hid/i2c-hid/i2c-hid-core.c | 155 +++++++++++++++-------------- 1 file changed, 79 insertions(+), 76 deletions(-) -- 2.41.0
