Re: [PATCH 1/3] Input: xpad - fix support for some third-party controllers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hey Dmitry, this patch series seems to have only gotten radio silence as well.
What could we do to get this moving?

On Fri, 2023-02-24 at 17:21 -0800, Vicki Pfau wrote:
> Some third-party controllers, such as the HORPIAD FPS for Nintendo Switch and
> Gamesir-G3w, require a specific packet that the first-party XInput driver sends
> before it will start sending reports. It's not currently known what this packet
> does, but since the first-party driver always sends it's unlikely that this
> could cause issues with existing controllers.
> 
> Co-authored-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
> Signed-off-by: Vicki Pfau <vi@xxxxxxxxxxx>
> ---
>  drivers/input/joystick/xpad.c | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
> index 403b57e8176b..04af2213407f 100644
> --- a/drivers/input/joystick/xpad.c
> +++ b/drivers/input/joystick/xpad.c
> @@ -265,6 +265,7 @@ static const struct xpad_device {
>  	{ 0x0f0d, 0x0067, "HORIPAD ONE", 0, XTYPE_XBOXONE },
>  	{ 0x0f0d, 0x0078, "Hori Real Arcade Pro V Kai Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
>  	{ 0x0f0d, 0x00c5, "Hori Fighting Commander ONE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
> +	{ 0x0f0d, 0x00dc, "HORIPAD FPS for Nintendo Switch", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
>  	{ 0x0f30, 0x010b, "Philips Recoil", 0, XTYPE_XBOX },
>  	{ 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX },
>  	{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
> @@ -2020,6 +2021,27 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
>  		goto err_free_in_urb;
>  	}
>  
> +	if (xpad->xtype == XTYPE_XBOX360) {
> +		/* Some third-party controllers Xbox 360-style controllers
> +		 * require this message to finish initialization */
> +		uint8_t dummy[20];
> +		int ret;
> +
> +		usb_control_msg_recv(udev, 0,
> +				     /* bRequest */ 0x01,
> +				     /* bmRequestType */
> +				     USB_TYPE_VENDOR | USB_DIR_IN |
> +				     USB_RECIP_INTERFACE,
> +				     /* wValue */ 0x100,
> +				     /* wIndex */ 0x00,
> +				     dummy, sizeof(dummy),
> +				     25,
> +				     GFP_KERNEL);
> +		if (ret)
> +			dev_warn(&xpad->dev->dev,
> +				 "unable to receive magic message: %d\n", ret);
> +	}
> +
>  	ep_irq_in = ep_irq_out = NULL;
>  
>  	for (i = 0; i < 2; i++) {

-- 
Cheers,
 Lyude Paul (she/her)
 Software Engineer at Red Hat





[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux