On Mon, Oct 10, 2022 at 11:23 PM Roderick Colenbrander
<roderick@xxxxxxxxxx> wrote:
>
> Newer DualSense firmware supports a revised classic rumble mode,
> which feels more similar to rumble as supported on previous PlayStation
> controllers. It has been made the default on PlayStation and non-PlayStation
> devices now (e.g. iOS and Windows). Default to this new mode when
> supported.
>
> Signed-off-by: Roderick Colenbrander <roderick.colenbrander@xxxxxxxx>
> ---
> drivers/hid/hid-playstation.c | 37 ++++++++++++++++++++++++++++++++++-
> 1 file changed, 36 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/hid/hid-playstation.c b/drivers/hid/hid-playstation.c
> index 396356b6760a..2a9870a62301 100644
> --- a/drivers/hid/hid-playstation.c
> +++ b/drivers/hid/hid-playstation.c
> @@ -108,6 +108,9 @@ struct ps_led_info {
> #define DS_STATUS_CHARGING GENMASK(7, 4)
> #define DS_STATUS_CHARGING_SHIFT 4
>
> +/* Feature version from DualSense Firmware Info report. */
> +#define DS_FEATURE_VERSION(major, minor) ((major & 0xff) << 8 | (minor & 0xff))
> +
> /*
> * Status of a DualSense touch point contact.
> * Contact IDs, with highest bit set are 'inactive'
> @@ -126,6 +129,7 @@ struct ps_led_info {
> #define DS_OUTPUT_VALID_FLAG1_RELEASE_LEDS BIT(3)
> #define DS_OUTPUT_VALID_FLAG1_PLAYER_INDICATOR_CONTROL_ENABLE BIT(4)
> #define DS_OUTPUT_VALID_FLAG2_LIGHTBAR_SETUP_CONTROL_ENABLE BIT(1)
> +#define DS_OUTPUT_VALID_FLAG2_COMPATIBLE_VIBRATION2 BIT(2)
> #define DS_OUTPUT_POWER_SAVE_CONTROL_MIC_MUTE BIT(4)
> #define DS_OUTPUT_LIGHTBAR_SETUP_LIGHT_OUT BIT(1)
>
> @@ -143,6 +147,9 @@ struct dualsense {
> struct input_dev *sensors;
> struct input_dev *touchpad;
>
> + /* Update version is used as a feature/capability version. */
> + uint16_t update_version;
> +
> /* Calibration data for accelerometer and gyroscope. */
> struct ps_calibration_data accel_calib_data[3];
> struct ps_calibration_data gyro_calib_data[3];
> @@ -153,6 +160,7 @@ struct dualsense {
> uint32_t sensor_timestamp_us;
>
> /* Compatible rumble state */
> + bool use_vibration_v2;
> bool update_rumble;
> uint8_t motor_left;
> uint8_t motor_right;
> @@ -812,6 +820,15 @@ static int dualsense_get_firmware_info(struct dualsense *ds)
> ds->base.hw_version = get_unaligned_le32(&buf[24]);
> ds->base.fw_version = get_unaligned_le32(&buf[28]);
>
> + /* Update version is some kind of feature version. It is distinct from
> + * the firmware version as there can be many different variations of a
> + * controller over time with the same physical shell, but with different
> + * PCBs and other internal changes. The update version (internal name) is
> + * used as a means to detect what features are available and change behavior.
> + * Note: the version is different between DualSense and DualSense Edge.
> + */
> + ds->update_version = get_unaligned_le16(&buf[44]);
> +
> err_free:
> kfree(buf);
> return ret;
> @@ -974,7 +991,10 @@ static void dualsense_output_worker(struct work_struct *work)
> if (ds->update_rumble) {
> /* Select classic rumble style haptics and enable it. */
> common->valid_flag0 |= DS_OUTPUT_VALID_FLAG0_HAPTICS_SELECT;
> - common->valid_flag0 |= DS_OUTPUT_VALID_FLAG0_COMPATIBLE_VIBRATION;
> + if (ds->use_vibration_v2)
> + common->valid_flag2 |= DS_OUTPUT_VALID_FLAG2_COMPATIBLE_VIBRATION2;
> + else
> + common->valid_flag0 |= DS_OUTPUT_VALID_FLAG0_COMPATIBLE_VIBRATION;
> common->motor_left = ds->motor_left;
> common->motor_right = ds->motor_right;
> ds->update_rumble = false;
> @@ -1348,6 +1368,21 @@ static struct ps_device *dualsense_create(struct hid_device *hdev)
> return ERR_PTR(ret);
> }
>
> + /* Original DualSense firmware simulated classic controller rumble through
> + * its new haptics hardware. It felt different from classic rumble users
> + * were used to. Since then new firmwares were introduced to change behavior
> + * and make this new 'v2' behavior default on PlayStation and other platforms.
> + * The original DualSense requires a new enough firmware as bundled with PS5
> + * software released in 2021. DualSense edge supports it out of the box.
> + * Both devices also support the old mode, but it is not really used.
> + */
> + if (hdev->product == USB_DEVICE_ID_SONY_PS5_CONTROLLER) {
> + /* Feature version 2.21 introduced new vibration method. */
> + ds->use_vibration_v2 = ds->update_version >= DS_FEATURE_VERSION(2, 21) ? true : false;
I have removed the extra "? true : false" and applied the full series
to for-6.1/upstream-fixes.
I'll let things in for-next for a few days and hopefully send it to
Linus next week.
Cheers,
Benjamin
> + } else if (hdev->product == USB_DEVICE_ID_SONY_PS5_CONTROLLER_2) {
> + ds->use_vibration_v2 = true;
> + }
> +
> ret = ps_devices_list_add(ps_dev);
> if (ret)
> return ERR_PTR(ret);
> --
> 2.37.3
>
