RE: [PATCH] Input: adp5588-keys: Remove unused driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
> Sent: Mittwoch, 4. Mai 2022 10:46
> To: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>; Hennerich, Michael
> <Michael.Hennerich@xxxxxxxxxx>
> Cc: linux-input@xxxxxxxxxxxxxxx; kernel@xxxxxxxxxxxxxx; Arnd Bergmann
> <arnd@xxxxxxxx>
> Subject: [PATCH] Input: adp5588-keys: Remove unused driver
> 
> The last user is gone since 2018 (commit 4ba66a976072 ("arch: remove
> blackfin port")). This is an i2c driver, so it could be used on a non-blackfin
> machine, but this driver requires platform data, so it cannot be bound using
> device tree.

Hi Uwe,

If we start removing drivers which obviously don't have a mainline in-tree user,
we would upset up many users of these drivers.
I agree on updating this driver to make platform data optional.
We could provide a patch in a few days.

Thoughts?

Regards,
Michael   

> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
> ---
>  MAINTAINERS                           |   1 -
>  drivers/input/keyboard/Kconfig        |  10 -
>  drivers/input/keyboard/Makefile       |   1 -
>  drivers/input/keyboard/adp5588-keys.c | 672 --------------------------
> include/linux/platform_data/adp5588.h |  19 -
>  5 files changed, 703 deletions(-)
>  delete mode 100644 drivers/input/keyboard/adp5588-keys.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index fd768d43e048..311fd3d528e8 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -548,7 +548,6 @@ S:	Supported
>  W:	http://wiki.analog.com/ADP5588
>  W:	https://ez.analog.com/linux-software-drivers
>  F:	drivers/gpio/gpio-adp5588.c
> -F:	drivers/input/keyboard/adp5588-keys.c
> 
>  ADP8860 BACKLIGHT DRIVER (ADP8860/ADP8861/ADP8863)
>  M:	Michael Hennerich <michael.hennerich@xxxxxxxxxx>
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index 4ea79db8f134..8b4ec278f8b2 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -37,16 +37,6 @@ config KEYBOARD_ADP5520
>  	  To compile this driver as a module, choose M here: the module will
>  	  be called adp5520-keys.
> 
> -config KEYBOARD_ADP5588
> -	tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander"
> -	depends on I2C
> -	help
> -	  Say Y here if you want to use a ADP5588/87 attached to your
> -	  system I2C bus.
> -
> -	  To compile this driver as a module, choose M here: the
> -	  module will be called adp5588-keys.
> -
>  config KEYBOARD_ADP5589
>  	tristate "ADP5585/ADP5589 I2C QWERTY Keypad and IO Expander"
>  	depends on I2C
> diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
> index 721936e90290..96643618fd41 100644
> --- a/drivers/input/keyboard/Makefile
> +++ b/drivers/input/keyboard/Makefile
> @@ -7,7 +7,6 @@
> 
>  obj-$(CONFIG_KEYBOARD_ADC)		+= adc-keys.o
>  obj-$(CONFIG_KEYBOARD_ADP5520)		+= adp5520-keys.o
> -obj-$(CONFIG_KEYBOARD_ADP5588)		+= adp5588-keys.o
>  obj-$(CONFIG_KEYBOARD_ADP5589)		+= adp5589-keys.o
>  obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o
>  obj-$(CONFIG_KEYBOARD_APPLESPI)		+= applespi.o
> diff --git a/drivers/input/keyboard/adp5588-keys.c
> b/drivers/input/keyboard/adp5588-keys.c
> deleted file mode 100644
> index 1592da4de336..000000000000
> --- a/drivers/input/keyboard/adp5588-keys.c
> +++ /dev/null
> @@ -1,672 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-or-later
> -/*
> - * File: drivers/input/keyboard/adp5588_keys.c
> - * Description:  keypad driver for ADP5588 and ADP5587
> - *		 I2C QWERTY Keypad and IO Expander
> - * Bugs: Enter bugs at
> https://urldefense.com/v3/__http://blackfin.uclinux.org/__;!!A3Ni8CS0y2Y!4oFK
> vhBBbAxC6odjcWkUnpV61u8G8ZtJYY0FXkgeY8VA3bRQ9Z1V9vgbPJPwZMhwSBR
> 1b0r9JK1FE9aKV6bQv6GlEYqBKY3ev39R_oc$
> - *
> - * Copyright (C) 2008-2010 Analog Devices Inc.
> - */
> -
> -#include <linux/module.h>
> -#include <linux/interrupt.h>
> -#include <linux/irq.h>
> -#include <linux/workqueue.h>
> -#include <linux/errno.h>
> -#include <linux/pm.h>
> -#include <linux/platform_device.h>
> -#include <linux/input.h>
> -#include <linux/i2c.h>
> -#include <linux/gpio/driver.h>
> -#include <linux/slab.h>
> -
> -#include <linux/platform_data/adp5588.h>
> -
> -/* Key Event Register xy */
> -#define KEY_EV_PRESSED		(1 << 7)
> -#define KEY_EV_MASK		(0x7F)
> -
> -#define KP_SEL(x)		(0xFFFF >> (16 - x))	/* 2^x-1 */
> -
> -#define KEYP_MAX_EVENT		10
> -
> -/*
> - * Early pre 4.0 Silicon required to delay readout by at least 25ms,
> - * since the Event Counter Register updated 25ms after the interrupt
> - * asserted.
> - */
> -#define WA_DELAYED_READOUT_REVID(rev)		((rev) < 4)
> -
> -struct adp5588_kpad {
> -	struct i2c_client *client;
> -	struct input_dev *input;
> -	struct delayed_work work;
> -	unsigned long delay;
> -	unsigned short keycode[ADP5588_KEYMAPSIZE];
> -	const struct adp5588_gpi_map *gpimap;
> -	unsigned short gpimapsize;
> -#ifdef CONFIG_GPIOLIB
> -	unsigned char gpiomap[ADP5588_MAXGPIO];
> -	bool export_gpio;
> -	struct gpio_chip gc;
> -	struct mutex gpio_lock;	/* Protect cached dir, dat_out */
> -	u8 dat_out[3];
> -	u8 dir[3];
> -#endif
> -};
> -
> -static int adp5588_read(struct i2c_client *client, u8 reg) -{
> -	int ret = i2c_smbus_read_byte_data(client, reg);
> -
> -	if (ret < 0)
> -		dev_err(&client->dev, "Read Error\n");
> -
> -	return ret;
> -}
> -
> -static int adp5588_write(struct i2c_client *client, u8 reg, u8 val) -{
> -	return i2c_smbus_write_byte_data(client, reg, val);
> -}
> -
> -#ifdef CONFIG_GPIOLIB
> -static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off) -{
> -	struct adp5588_kpad *kpad = gpiochip_get_data(chip);
> -	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
> -	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
> -	int val;
> -
> -	mutex_lock(&kpad->gpio_lock);
> -
> -	if (kpad->dir[bank] & bit)
> -		val = kpad->dat_out[bank];
> -	else
> -		val = adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank);
> -
> -	mutex_unlock(&kpad->gpio_lock);
> -
> -	return !!(val & bit);
> -}
> -
> -static void adp5588_gpio_set_value(struct gpio_chip *chip,
> -				   unsigned off, int val)
> -{
> -	struct adp5588_kpad *kpad = gpiochip_get_data(chip);
> -	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
> -	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
> -
> -	mutex_lock(&kpad->gpio_lock);
> -
> -	if (val)
> -		kpad->dat_out[bank] |= bit;
> -	else
> -		kpad->dat_out[bank] &= ~bit;
> -
> -	adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
> -			   kpad->dat_out[bank]);
> -
> -	mutex_unlock(&kpad->gpio_lock);
> -}
> -
> -static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off) -{
> -	struct adp5588_kpad *kpad = gpiochip_get_data(chip);
> -	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
> -	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
> -	int ret;
> -
> -	mutex_lock(&kpad->gpio_lock);
> -
> -	kpad->dir[bank] &= ~bit;
> -	ret = adp5588_write(kpad->client, GPIO_DIR1 + bank, kpad->dir[bank]);
> -
> -	mutex_unlock(&kpad->gpio_lock);
> -
> -	return ret;
> -}
> -
> -static int adp5588_gpio_direction_output(struct gpio_chip *chip,
> -					 unsigned off, int val)
> -{
> -	struct adp5588_kpad *kpad = gpiochip_get_data(chip);
> -	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
> -	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
> -	int ret;
> -
> -	mutex_lock(&kpad->gpio_lock);
> -
> -	kpad->dir[bank] |= bit;
> -
> -	if (val)
> -		kpad->dat_out[bank] |= bit;
> -	else
> -		kpad->dat_out[bank] &= ~bit;
> -
> -	ret = adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
> -				 kpad->dat_out[bank]);
> -	ret |= adp5588_write(kpad->client, GPIO_DIR1 + bank,
> -				 kpad->dir[bank]);
> -
> -	mutex_unlock(&kpad->gpio_lock);
> -
> -	return ret;
> -}
> -
> -static int adp5588_build_gpiomap(struct adp5588_kpad *kpad,
> -				const struct adp5588_kpad_platform_data
> *pdata)
> -{
> -	bool pin_used[ADP5588_MAXGPIO];
> -	int n_unused = 0;
> -	int i;
> -
> -	memset(pin_used, 0, sizeof(pin_used));
> -
> -	for (i = 0; i < pdata->rows; i++)
> -		pin_used[i] = true;
> -
> -	for (i = 0; i < pdata->cols; i++)
> -		pin_used[i + GPI_PIN_COL_BASE - GPI_PIN_BASE] = true;
> -
> -	for (i = 0; i < kpad->gpimapsize; i++)
> -		pin_used[kpad->gpimap[i].pin - GPI_PIN_BASE] = true;
> -
> -	for (i = 0; i < ADP5588_MAXGPIO; i++)
> -		if (!pin_used[i])
> -			kpad->gpiomap[n_unused++] = i;
> -
> -	return n_unused;
> -}
> -
> -static int adp5588_gpio_add(struct adp5588_kpad *kpad) -{
> -	struct device *dev = &kpad->client->dev;
> -	const struct adp5588_kpad_platform_data *pdata =
> dev_get_platdata(dev);
> -	const struct adp5588_gpio_platform_data *gpio_data = pdata-
> >gpio_data;
> -	int i, error;
> -
> -	if (!gpio_data)
> -		return 0;
> -
> -	kpad->gc.ngpio = adp5588_build_gpiomap(kpad, pdata);
> -	if (kpad->gc.ngpio == 0) {
> -		dev_info(dev, "No unused gpios left to export\n");
> -		return 0;
> -	}
> -
> -	kpad->export_gpio = true;
> -
> -	kpad->gc.direction_input = adp5588_gpio_direction_input;
> -	kpad->gc.direction_output = adp5588_gpio_direction_output;
> -	kpad->gc.get = adp5588_gpio_get_value;
> -	kpad->gc.set = adp5588_gpio_set_value;
> -	kpad->gc.can_sleep = 1;
> -
> -	kpad->gc.base = gpio_data->gpio_start;
> -	kpad->gc.label = kpad->client->name;
> -	kpad->gc.owner = THIS_MODULE;
> -	kpad->gc.names = gpio_data->names;
> -
> -	mutex_init(&kpad->gpio_lock);
> -
> -	error = gpiochip_add_data(&kpad->gc, kpad);
> -	if (error) {
> -		dev_err(dev, "gpiochip_add failed, err: %d\n", error);
> -		return error;
> -	}
> -
> -	for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
> -		kpad->dat_out[i] = adp5588_read(kpad->client,
> -						GPIO_DAT_OUT1 + i);
> -		kpad->dir[i] = adp5588_read(kpad->client, GPIO_DIR1 + i);
> -	}
> -
> -	if (gpio_data->setup) {
> -		error = gpio_data->setup(kpad->client,
> -					 kpad->gc.base, kpad->gc.ngpio,
> -					 gpio_data->context);
> -		if (error)
> -			dev_warn(dev, "setup failed, %d\n", error);
> -	}
> -
> -	return 0;
> -}
> -
> -static void adp5588_gpio_remove(struct adp5588_kpad *kpad) -{
> -	struct device *dev = &kpad->client->dev;
> -	const struct adp5588_kpad_platform_data *pdata =
> dev_get_platdata(dev);
> -	const struct adp5588_gpio_platform_data *gpio_data = pdata-
> >gpio_data;
> -	int error;
> -
> -	if (!kpad->export_gpio)
> -		return;
> -
> -	if (gpio_data->teardown) {
> -		error = gpio_data->teardown(kpad->client,
> -					    kpad->gc.base, kpad->gc.ngpio,
> -					    gpio_data->context);
> -		if (error)
> -			dev_warn(dev, "teardown failed %d\n", error);
> -	}
> -
> -	gpiochip_remove(&kpad->gc);
> -}
> -#else
> -static inline int adp5588_gpio_add(struct adp5588_kpad *kpad) -{
> -	return 0;
> -}
> -
> -static inline void adp5588_gpio_remove(struct adp5588_kpad *kpad) -{ -} -
> #endif
> -
> -static void adp5588_report_events(struct adp5588_kpad *kpad, int ev_cnt) -{
> -	int i, j;
> -
> -	for (i = 0; i < ev_cnt; i++) {
> -		int key = adp5588_read(kpad->client, Key_EVENTA + i);
> -		int key_val = key & KEY_EV_MASK;
> -
> -		if (key_val >= GPI_PIN_BASE && key_val <= GPI_PIN_END) {
> -			for (j = 0; j < kpad->gpimapsize; j++) {
> -				if (key_val == kpad->gpimap[j].pin) {
> -					input_report_switch(kpad->input,
> -							kpad-
> >gpimap[j].sw_evt,
> -							key &
> KEY_EV_PRESSED);
> -					break;
> -				}
> -			}
> -		} else {
> -			input_report_key(kpad->input,
> -					 kpad->keycode[key_val - 1],
> -					 key & KEY_EV_PRESSED);
> -		}
> -	}
> -}
> -
> -static void adp5588_work(struct work_struct *work) -{
> -	struct adp5588_kpad *kpad = container_of(work,
> -						struct adp5588_kpad,
> work.work);
> -	struct i2c_client *client = kpad->client;
> -	int status, ev_cnt;
> -
> -	status = adp5588_read(client, INT_STAT);
> -
> -	if (status & ADP5588_OVR_FLOW_INT)	/* Unlikely and should never
> happen */
> -		dev_err(&client->dev, "Event Overflow Error\n");
> -
> -	if (status & ADP5588_KE_INT) {
> -		ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) &
> ADP5588_KEC;
> -		if (ev_cnt) {
> -			adp5588_report_events(kpad, ev_cnt);
> -			input_sync(kpad->input);
> -		}
> -	}
> -	adp5588_write(client, INT_STAT, status); /* Status is W1C */
> -}
> -
> -static irqreturn_t adp5588_irq(int irq, void *handle) -{
> -	struct adp5588_kpad *kpad = handle;
> -
> -	/*
> -	 * use keventd context to read the event fifo registers
> -	 * Schedule readout at least 25ms after notification for
> -	 * REVID < 4
> -	 */
> -
> -	schedule_delayed_work(&kpad->work, kpad->delay);
> -
> -	return IRQ_HANDLED;
> -}
> -
> -static int adp5588_setup(struct i2c_client *client) -{
> -	const struct adp5588_kpad_platform_data *pdata =
> -			dev_get_platdata(&client->dev);
> -	const struct adp5588_gpio_platform_data *gpio_data = pdata-
> >gpio_data;
> -	int i, ret;
> -	unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0;
> -
> -	ret = adp5588_write(client, KP_GPIO1, KP_SEL(pdata->rows));
> -	ret |= adp5588_write(client, KP_GPIO2, KP_SEL(pdata->cols) & 0xFF);
> -	ret |= adp5588_write(client, KP_GPIO3, KP_SEL(pdata->cols) >> 8);
> -
> -	if (pdata->en_keylock) {
> -		ret |= adp5588_write(client, UNLOCK1, pdata->unlock_key1);
> -		ret |= adp5588_write(client, UNLOCK2, pdata->unlock_key2);
> -		ret |= adp5588_write(client, KEY_LCK_EC_STAT,
> ADP5588_K_LCK_EN);
> -	}
> -
> -	for (i = 0; i < KEYP_MAX_EVENT; i++)
> -		ret |= adp5588_read(client, Key_EVENTA);
> -
> -	for (i = 0; i < pdata->gpimapsize; i++) {
> -		unsigned short pin = pdata->gpimap[i].pin;
> -
> -		if (pin <= GPI_PIN_ROW_END) {
> -			evt_mode1 |= (1 << (pin - GPI_PIN_ROW_BASE));
> -		} else {
> -			evt_mode2 |= ((1 << (pin - GPI_PIN_COL_BASE)) &
> 0xFF);
> -			evt_mode3 |= ((1 << (pin - GPI_PIN_COL_BASE)) >> 8);
> -		}
> -	}
> -
> -	if (pdata->gpimapsize) {
> -		ret |= adp5588_write(client, GPI_EM1, evt_mode1);
> -		ret |= adp5588_write(client, GPI_EM2, evt_mode2);
> -		ret |= adp5588_write(client, GPI_EM3, evt_mode3);
> -	}
> -
> -	if (gpio_data) {
> -		for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
> -			int pull_mask = gpio_data->pullup_dis_mask;
> -
> -			ret |= adp5588_write(client, GPIO_PULL1 + i,
> -				(pull_mask >> (8 * i)) & 0xFF);
> -		}
> -	}
> -
> -	ret |= adp5588_write(client, INT_STAT,
> -				ADP5588_CMP2_INT | ADP5588_CMP1_INT |
> -				ADP5588_OVR_FLOW_INT |
> ADP5588_K_LCK_INT |
> -				ADP5588_GPI_INT | ADP5588_KE_INT); /*
> Status is W1C */
> -
> -	ret |= adp5588_write(client, CFG, ADP5588_INT_CFG |
> -					  ADP5588_OVR_FLOW_IEN |
> -					  ADP5588_KE_IEN);
> -
> -	if (ret < 0) {
> -		dev_err(&client->dev, "Write Error\n");
> -		return ret;
> -	}
> -
> -	return 0;
> -}
> -
> -static void adp5588_report_switch_state(struct adp5588_kpad *kpad) -{
> -	int gpi_stat1 = adp5588_read(kpad->client, GPIO_DAT_STAT1);
> -	int gpi_stat2 = adp5588_read(kpad->client, GPIO_DAT_STAT2);
> -	int gpi_stat3 = adp5588_read(kpad->client, GPIO_DAT_STAT3);
> -	int gpi_stat_tmp, pin_loc;
> -	int i;
> -
> -	for (i = 0; i < kpad->gpimapsize; i++) {
> -		unsigned short pin = kpad->gpimap[i].pin;
> -
> -		if (pin <= GPI_PIN_ROW_END) {
> -			gpi_stat_tmp = gpi_stat1;
> -			pin_loc = pin - GPI_PIN_ROW_BASE;
> -		} else if ((pin - GPI_PIN_COL_BASE) < 8) {
> -			gpi_stat_tmp = gpi_stat2;
> -			pin_loc = pin - GPI_PIN_COL_BASE;
> -		} else {
> -			gpi_stat_tmp = gpi_stat3;
> -			pin_loc = pin - GPI_PIN_COL_BASE - 8;
> -		}
> -
> -		if (gpi_stat_tmp < 0) {
> -			dev_err(&kpad->client->dev,
> -				"Can't read GPIO_DAT_STAT switch %d default
> to OFF\n",
> -				pin);
> -			gpi_stat_tmp = 0;
> -		}
> -
> -		input_report_switch(kpad->input,
> -				    kpad->gpimap[i].sw_evt,
> -				    !(gpi_stat_tmp & (1 << pin_loc)));
> -	}
> -
> -	input_sync(kpad->input);
> -}
> -
> -
> -static int adp5588_probe(struct i2c_client *client,
> -			 const struct i2c_device_id *id)
> -{
> -	struct adp5588_kpad *kpad;
> -	const struct adp5588_kpad_platform_data *pdata =
> -			dev_get_platdata(&client->dev);
> -	struct input_dev *input;
> -	unsigned int revid;
> -	int ret, i;
> -	int error;
> -
> -	if (!i2c_check_functionality(client->adapter,
> -					I2C_FUNC_SMBUS_BYTE_DATA)) {
> -		dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
> -		return -EIO;
> -	}
> -
> -	if (!pdata) {
> -		dev_err(&client->dev, "no platform data?\n");
> -		return -EINVAL;
> -	}
> -
> -	if (!pdata->rows || !pdata->cols || !pdata->keymap) {
> -		dev_err(&client->dev, "no rows, cols or keymap from
> pdata\n");
> -		return -EINVAL;
> -	}
> -
> -	if (pdata->keymapsize != ADP5588_KEYMAPSIZE) {
> -		dev_err(&client->dev, "invalid keymapsize\n");
> -		return -EINVAL;
> -	}
> -
> -	if (!pdata->gpimap && pdata->gpimapsize) {
> -		dev_err(&client->dev, "invalid gpimap from pdata\n");
> -		return -EINVAL;
> -	}
> -
> -	if (pdata->gpimapsize > ADP5588_GPIMAPSIZE_MAX) {
> -		dev_err(&client->dev, "invalid gpimapsize\n");
> -		return -EINVAL;
> -	}
> -
> -	for (i = 0; i < pdata->gpimapsize; i++) {
> -		unsigned short pin = pdata->gpimap[i].pin;
> -
> -		if (pin < GPI_PIN_BASE || pin > GPI_PIN_END) {
> -			dev_err(&client->dev, "invalid gpi pin data\n");
> -			return -EINVAL;
> -		}
> -
> -		if (pin <= GPI_PIN_ROW_END) {
> -			if (pin - GPI_PIN_ROW_BASE + 1 <= pdata->rows) {
> -				dev_err(&client->dev, "invalid gpi row
> data\n");
> -				return -EINVAL;
> -			}
> -		} else {
> -			if (pin - GPI_PIN_COL_BASE + 1 <= pdata->cols) {
> -				dev_err(&client->dev, "invalid gpi col data\n");
> -				return -EINVAL;
> -			}
> -		}
> -	}
> -
> -	if (!client->irq) {
> -		dev_err(&client->dev, "no IRQ?\n");
> -		return -EINVAL;
> -	}
> -
> -	kpad = kzalloc(sizeof(*kpad), GFP_KERNEL);
> -	input = input_allocate_device();
> -	if (!kpad || !input) {
> -		error = -ENOMEM;
> -		goto err_free_mem;
> -	}
> -
> -	kpad->client = client;
> -	kpad->input = input;
> -	INIT_DELAYED_WORK(&kpad->work, adp5588_work);
> -
> -	ret = adp5588_read(client, DEV_ID);
> -	if (ret < 0) {
> -		error = ret;
> -		goto err_free_mem;
> -	}
> -
> -	revid = (u8) ret & ADP5588_DEVICE_ID_MASK;
> -	if (WA_DELAYED_READOUT_REVID(revid))
> -		kpad->delay = msecs_to_jiffies(30);
> -
> -	input->name = client->name;
> -	input->phys = "adp5588-keys/input0";
> -	input->dev.parent = &client->dev;
> -
> -	input_set_drvdata(input, kpad);
> -
> -	input->id.bustype = BUS_I2C;
> -	input->id.vendor = 0x0001;
> -	input->id.product = 0x0001;
> -	input->id.version = revid;
> -
> -	input->keycodesize = sizeof(kpad->keycode[0]);
> -	input->keycodemax = pdata->keymapsize;
> -	input->keycode = kpad->keycode;
> -
> -	memcpy(kpad->keycode, pdata->keymap,
> -		pdata->keymapsize * input->keycodesize);
> -
> -	kpad->gpimap = pdata->gpimap;
> -	kpad->gpimapsize = pdata->gpimapsize;
> -
> -	/* setup input device */
> -	__set_bit(EV_KEY, input->evbit);
> -
> -	if (pdata->repeat)
> -		__set_bit(EV_REP, input->evbit);
> -
> -	for (i = 0; i < input->keycodemax; i++)
> -		if (kpad->keycode[i] <= KEY_MAX)
> -			__set_bit(kpad->keycode[i], input->keybit);
> -	__clear_bit(KEY_RESERVED, input->keybit);
> -
> -	if (kpad->gpimapsize)
> -		__set_bit(EV_SW, input->evbit);
> -	for (i = 0; i < kpad->gpimapsize; i++)
> -		__set_bit(kpad->gpimap[i].sw_evt, input->swbit);
> -
> -	error = input_register_device(input);
> -	if (error) {
> -		dev_err(&client->dev, "unable to register input device\n");
> -		goto err_free_mem;
> -	}
> -
> -	error = request_irq(client->irq, adp5588_irq,
> -			    IRQF_TRIGGER_FALLING,
> -			    client->dev.driver->name, kpad);
> -	if (error) {
> -		dev_err(&client->dev, "irq %d busy?\n", client->irq);
> -		goto err_unreg_dev;
> -	}
> -
> -	error = adp5588_setup(client);
> -	if (error)
> -		goto err_free_irq;
> -
> -	if (kpad->gpimapsize)
> -		adp5588_report_switch_state(kpad);
> -
> -	error = adp5588_gpio_add(kpad);
> -	if (error)
> -		goto err_free_irq;
> -
> -	device_init_wakeup(&client->dev, 1);
> -	i2c_set_clientdata(client, kpad);
> -
> -	dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq);
> -	return 0;
> -
> - err_free_irq:
> -	free_irq(client->irq, kpad);
> -	cancel_delayed_work_sync(&kpad->work);
> - err_unreg_dev:
> -	input_unregister_device(input);
> -	input = NULL;
> - err_free_mem:
> -	input_free_device(input);
> -	kfree(kpad);
> -
> -	return error;
> -}
> -
> -static int adp5588_remove(struct i2c_client *client) -{
> -	struct adp5588_kpad *kpad = i2c_get_clientdata(client);
> -
> -	adp5588_write(client, CFG, 0);
> -	free_irq(client->irq, kpad);
> -	cancel_delayed_work_sync(&kpad->work);
> -	input_unregister_device(kpad->input);
> -	adp5588_gpio_remove(kpad);
> -	kfree(kpad);
> -
> -	return 0;
> -}
> -
> -#ifdef CONFIG_PM
> -static int adp5588_suspend(struct device *dev) -{
> -	struct adp5588_kpad *kpad = dev_get_drvdata(dev);
> -	struct i2c_client *client = kpad->client;
> -
> -	disable_irq(client->irq);
> -	cancel_delayed_work_sync(&kpad->work);
> -
> -	if (device_may_wakeup(&client->dev))
> -		enable_irq_wake(client->irq);
> -
> -	return 0;
> -}
> -
> -static int adp5588_resume(struct device *dev) -{
> -	struct adp5588_kpad *kpad = dev_get_drvdata(dev);
> -	struct i2c_client *client = kpad->client;
> -
> -	if (device_may_wakeup(&client->dev))
> -		disable_irq_wake(client->irq);
> -
> -	enable_irq(client->irq);
> -
> -	return 0;
> -}
> -
> -static const struct dev_pm_ops adp5588_dev_pm_ops = {
> -	.suspend = adp5588_suspend,
> -	.resume  = adp5588_resume,
> -};
> -#endif
> -
> -static const struct i2c_device_id adp5588_id[] = {
> -	{ "adp5588-keys", 0 },
> -	{ "adp5587-keys", 0 },
> -	{ }
> -};
> -MODULE_DEVICE_TABLE(i2c, adp5588_id);
> -
> -static struct i2c_driver adp5588_driver = {
> -	.driver = {
> -		.name = KBUILD_MODNAME,
> -#ifdef CONFIG_PM
> -		.pm   = &adp5588_dev_pm_ops,
> -#endif
> -	},
> -	.probe    = adp5588_probe,
> -	.remove   = adp5588_remove,
> -	.id_table = adp5588_id,
> -};
> -
> -module_i2c_driver(adp5588_driver);
> -
> -MODULE_LICENSE("GPL");
> -MODULE_AUTHOR("Michael Hennerich <hennerich@xxxxxxxxxxxxxxxxxxxx>");
> -MODULE_DESCRIPTION("ADP5588/87 Keypad driver"); diff --git
> a/include/linux/platform_data/adp5588.h
> b/include/linux/platform_data/adp5588.h
> index 6d3f7d911a92..931ceecd1fc6 100644
> --- a/include/linux/platform_data/adp5588.h
> +++ b/include/linux/platform_data/adp5588.h
> @@ -133,25 +133,6 @@
> 
>  #define ADP5588_GPIMAPSIZE_MAX (GPI_PIN_END - GPI_PIN_BASE + 1)
> 
> -struct adp5588_gpi_map {
> -	unsigned short pin;
> -	unsigned short sw_evt;
> -};
> -
> -struct adp5588_kpad_platform_data {
> -	int rows;			/* Number of rows */
> -	int cols;			/* Number of columns */
> -	const unsigned short *keymap;	/* Pointer to keymap */
> -	unsigned short keymapsize;	/* Keymap size */
> -	unsigned repeat:1;		/* Enable key repeat */
> -	unsigned en_keylock:1;		/* Enable Key Lock feature */
> -	unsigned short unlock_key1;	/* Unlock Key 1 */
> -	unsigned short unlock_key2;	/* Unlock Key 2 */
> -	const struct adp5588_gpi_map *gpimap;
> -	unsigned short gpimapsize;
> -	const struct adp5588_gpio_platform_data *gpio_data;
> -};
> -
>  struct i2c_client; /* forward declaration */
> 
>  struct adp5588_gpio_platform_data {
> 
> base-commit: 3123109284176b1532874591f7c81f3837bbdc17
> --
> 2.35.1







[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux