> > Hi, > > > > On Mon, Apr 12, 2021 at 6:20 PM Johnny Chuang > > <johnny.chuang.emc@xxxxxxxxx> wrote: > > > > > > Fixes: 43b7029f475e ("HID: i2c-hid: Send power-on command after reset"). > > > > Note that the "Fixes" tag actually belongs down at the end. It also > > shouldn't have a "." at the end. Presumably the maintainer can adjust this > when landing? > > > > Hi Dmitry, > Could you help to review this patch and give an advice? Hi Sirs, Could anyone help to review this patch and give an advice? > > > > > > For ELAN touchscreen, we found our boot code of IC was not flexible > > > enough to receive and handle this command. > > > Once the FW main code of our controller is crashed for some reason, > > > the controller could not be enumerated successfully to be recognized > > > by the system host. therefore, it lost touch functionality. > > > > > > Add quirk for skip send power-on command after reset. > > > It will impact to ELAN touchscreen and touchpad on HID over I2C projects. > > > > > > Signed-off-by: Johnny Chuang <johnny.chuang.emc@xxxxxxxxx> > > > > This patch looks fine to me, thus: > > > > Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx> > > > > I can confirm that after applying this patch I can recovery my borked > > touchscreen (which got borked by a failed firmware update ages ago): > > > > Tested-by: Douglas Anderson <dianders@xxxxxxxxxxxx>