Re: [PATCH 2/3] dt-bindings: touchscreen: Add HY46XX bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Adding +CC Dmitry

--
Giulio Benetti
CTO

MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642

Il 05/03/2021 17:38, Giulio Benetti ha scritto:
From: Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxx>

This adds device tree bindings for the Hycon HY46XX touchscreen series.

Signed-off-by: Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxx>
---
  .../input/touchscreen/hycon,hy46xx.yaml       | 130 ++++++++++++++++++
  MAINTAINERS                                   |   6 +
  2 files changed, 136 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml

diff --git a/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
new file mode 100644
index 000000000000..cddd5e5bae92
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/hycon-hy46xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: hyconon HY46XX series touchscreen controller Bindings
+
+description: |
+             There are 6 variants of the chip for various touch panel sizes and coverl len material
+              Glass: 0.3mm--4.0mm
+              PET/PMMA: 0.2mm--2.0mm
+               HY4613(B)-N048  < 6"
+               HY4614(B)-N068  7" .. 10.1"
+               HY4621-NS32  < 5"
+               HY4623-NS48  5.1" .. 7"
+              Glass: 0.3mm--8.0mm
+              PET/PMMA: 0.2mm--4.0mm
+               HY4633(B)-N048  < 6"
+               HY4635(B)-N048  < 7" .. 10.1"
+
+maintainers:
+  - Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxx>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - hycon,hycon-hy4613
+      - hycon,hycon-hy4614
+      - hycon,hycon-hy4621
+      - hycon,hycon-hy4623
+      - hycon,hycon-hy4633
+      - hycon,hycon-hy4635
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vcc-supply: true
+
+  threshold:
+    description: Allows setting the sensitivity in the range from 0 to 255.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 255
+
+  proximity-sensor-switch:
+    description: Allows enabling or disabling the Proximity Sensor.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 1
+
+  glove-enable:
+    description: Allows enabling or disabling glove setting.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 1
+
+  report-speed:
+    description: Allows setting the report speed(i.e 0x64 => 100Hz).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 255
+
+  power-noise-enable:
+    description: Allows enabling or disabling power noise filter.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 1
+
+  filter-data:
+    description: Allows setting the filtering data before reporting touch
+                 in the range from 0 to 5.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 5
+
+  gain:
+    description: Allows setting the sensitivity distance in the range from 0 to 5.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 5
+
+  edge-offset:
+    description: Allows setting the edge compensation in the range from 0 to 16.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 16
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+  interrupt-controller: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      hycon-hy4633@1c {
+        compatible = "hycon,hy4633";
+        reg = <0x1c>;
+        interrupt-parent = <&gpio2>;
+        interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+        reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+      };
+    };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index d92f85ca831d..3f83daf6b2bf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8245,6 +8245,12 @@ S:	Maintained
  F:	mm/hwpoison-inject.c
  F:	mm/memory-failure.c
+HYCON HY46XX TOUCHSCREEN SUPPORT
+M:	Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxx>
+L:	linux-input@xxxxxxxxxxxxxxx
+S:	Maintained
+F:	Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
+
  HYGON PROCESSOR SUPPORT
  M:	Pu Wen <puwen@xxxxxxxx>
  L:	linux-kernel@xxxxxxxxxxxxxxx




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux