This is v4 of a driver for the Corsair Commander Pro. It provides sysfs attributes for: - Reading fan speed - Reading temp sensors - Reading voltage values - Writing pwm and reading last written pwm - Reading fan and temp connection status It is an usb driver, so it needs to be ignored by usbhid. (patch 3/3) This is based on the staging/hwmon tree. Signed-off-by: Marius Zachmann <mail@xxxxxxxxxxxxxxxxx> --- Changes from v3 - add device ids to hid_ignore_list in hid-quirks.h - removed unused update_interval - ccp_disconnect is static Changes from v2 - add corsair-cpro to Documentation/hwmon/index.rst - add SPDX license identifier to corsair-cpro.rst - remove fanX_enable from Documentation and driver - changed comment style - clarified protocol in comments - add get_temp_cnct for reading temperature sensor connection status - added temp_cnct and temp_label in ccp_device - added tempX_label, showing connection status - renamed get_fan_mode_label to get_fan_cnct - get_temp_cnct and get_fan_cnct only called in probe - send_usb_cmd checks errors in the device response - send_usb_cmd clears the buffer and sets the command - inlined get_fan_rpm and get_voltage and removed functions - more reverse christmas tree Marius Zachmann (3): input: add to hid_ignore_list add Documentation add driver Documentation/hwmon/corsair-cpro.rst | 40 +++ Documentation/hwmon/index.rst | 1 + MAINTAINERS | 6 + drivers/hid/hid-quirks.c | 2 + drivers/hwmon/Kconfig | 10 + drivers/hwmon/Makefile | 1 + drivers/hwmon/corsair-cpro.c | 489 +++++++++++++++++++++++++++ 7 files changed, 549 insertions(+) create mode 100644 Documentation/hwmon/corsair-cpro.rst create mode 100644 drivers/hwmon/corsair-cpro.c -- 2.27.0
