Re: [RESEND PATCH V13 3/3] Input: new da7280 haptic driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

On Mon, Jun 15, 2020 at 08:40:23PM +0900, Roy Im wrote:
> Adds support for the Dialog DA7280 LRA/ERM Haptic Driver with
> multiple mode and integrated waveform memory and wideband support.
> It communicates via an I2C bus to the device.
> 
> Signed-off-by: Roy Im <roy.im.opensource@xxxxxxxxxxx>

Just some picky comments below.

> +	error = pwm_apply_state(haptics->pwm_dev, &state);
> +	if (error)
> +		dev_err(haptics->dev,
> +			"failed to apply pwm state: %pE\n",
> +			ERR_PTR(error));

You can save some horizontal space here by dropping the \n after the
first comma. (There are a few more occurences.)

> +	return error;
> +}
> +[...]
> +
> +		/* Sync up PWM state and ensure it is off. */
> +		pwm_init_state(haptics->pwm_dev, &state);
> +		state.enabled = false;
> +		error = pwm_apply_state(haptics->pwm_dev, &state);
> +		if (error) {
> +			dev_err(dev,
> +				"failed to apply initial PWM state: %pE\n",
> +				ERR_PTR(error));
> +			return error;
> +		}
> +
> +		/* Check PWM Period, it must be in 10k ~ 250kHz */

The unit of a PWM period is in (nano)seconds, to it cannot be in the
range [10kHz, 250kHz]. (Is this too picky?)

> +		period2freq = 1000000 / state.period;
> +		if (period2freq < DA7280_MIN_PWM_FREQ_KHZ ||
> +		    period2freq > DA7280_MAX_PWM_FREQ_KHZ) {
> +			dev_err(dev, "Not supported PWM frequency(%d)\n",
> +				period2freq);

Doesn't the compiler warn here about period2freq being unsigned and %d
being for signed int values?

For my (non-native) English ear s/Not supported/Unsupported/ sounds
better. Also my eyes would be pleases by a space before the opening
brace.

> +			return -EINVAL;
> +		}
> +	}
> +
> +
> +[...]
> +static struct i2c_driver da7280_driver = {
> +	.driver	= {
> +		.name		= "da7280",
> +		.of_match_table	= of_match_ptr(da7280_of_match),
> +		.pm		= &da7280_pm_ops,

I don't like alignment of =, but I'm aware this is a subjective thing.
(The reason for me is that adding a new member that is longer than the
already existing requires touching all lines. So I stick to a single
space before a =.)

> +	},
> +	.probe	  = da7280_probe,
> +	.id_table = da7280_i2c_id,
> +};
> +module_i2c_driver(da7280_driver);
> +
> +MODULE_DESCRIPTION("DA7280 haptics driver");
> +MODULE_AUTHOR("Roy Im <Roy.Im.Opensource@xxxxxxxxxxx>");
> +MODULE_LICENSE("GPL");
> -- 
> end-of-patch for RESEND PATCH V13

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux