From: keerthikumarp <Keerthikumar.Padmanabha@xxxxxxxxxxxx>
In case of attached display, the touchpanel reset is controlled
via imx gpio's from atmel driver and the delay between
touchpanel reset and the time at which the chip becomes capable to
communicate with the host processor, has be taken care.
However in case of detachable displays, the touchpanel reset is
controlled via a deserializer gpio which is triggered just before
the atmel driver is probed.The delay between touchpanel reset and
the time at which the chip becomes capable to communicate (as
specified in datasheet) was not being accounted for. This patch
introduces that delay.
Signed-off-by: keerthikumarp <Keerthikumar.Padmanabha@xxxxxxxxxxxx>
Signed-off-by: George G. Davis <george_davis@xxxxxxxxxx>
Signed-off-by: Jiada Wang <jiada_wang@xxxxxxxxxx>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index ceb14b4a8d4d..3ffd49b383f4 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -4105,6 +4105,10 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
msleep(MXT_RESET_GPIO_TIME);
gpiod_set_value(data->reset_gpio, 1);
msleep(MXT_RESET_INVALID_CHG);
+ } else {
+ dev_dbg(&client->dev,
+ "atmel reset pin not found in device tree");
+ msleep(MXT_RESET_TIME);
}
error = mxt_initialize(data);
--
2.17.1
