From: "George G. Davis" <george_davis@xxxxxxxxxx> N.B. Modifying the atmel_mxt_ts GPIO reset line during operation will cause problems with normal driver operation. This feature is provided as a diagnostic debug aid. It does not take into consideration any pending operations which may be in progress. Modifying the atmel_mxt_ts GPIO reset line at any time will inevitably cause the driver to fail. Signed-off-by: George G. Davis <george_davis@xxxxxxxxxx> Signed-off-by: Rajeev Kumar <rajeev_kumar@xxxxxxxxxx> Signed-off-by: Jiada Wang <jiada_wang@xxxxxxxxxx> --- drivers/input/touchscreen/atmel_mxt_ts.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 75329f87927b..ceb14b4a8d4d 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -4080,6 +4080,19 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id) return error; } + if (data->reset_gpio) { + error = gpiod_export(data->reset_gpio, 0); + if (error) + return error; + + error = gpiod_export_link(&client->dev, "reset", + data->reset_gpio); + if (error) { + gpiod_unexport(data->reset_gpio); + return error; + } + } + if (data->suspend_mode == MXT_SUSPEND_REGULATOR) { enable_irq(data->irq); @@ -4110,6 +4123,10 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id) err_free_object: mxt_free_input_device(data); mxt_free_object_table(data); + if (data->reset_gpio) { + sysfs_remove_link(&client->dev.kobj, "reset"); + gpiod_unexport(data->reset_gpio); + } return error; } @@ -4119,6 +4136,10 @@ static int mxt_remove(struct i2c_client *client) disable_irq(data->irq); sysfs_remove_group(&client->dev.kobj, &mxt_fw_attr_group); + if (data->reset_gpio) { + sysfs_remove_link(&client->dev.kobj, "reset"); + gpiod_unexport(data->reset_gpio); + } mxt_debug_msg_remove(data); mxt_sysfs_remove(data); mxt_free_input_device(data); -- 2.17.1