Re: [PATCH 3/8] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Dmitry,

Thank you for your prompt review.

On Tue, Oct 22, 2019 at 05:22:54PM -0700, Dmitry Torokhov wrote:
> Hi Jeff,
> 
> On Sun, Oct 20, 2019 at 11:11:18PM -0500, Jeff LaBundy wrote:
> > This patch adds touch key support for six-channel members of the
> > Azoteq ProxFusion family of sensor devices.
> > 
> > Signed-off-by: Jeff LaBundy <jeff@xxxxxxxxxxx>
> > ---
> >  drivers/input/keyboard/Kconfig       |  10 ++
> >  drivers/input/keyboard/Makefile      |   1 +
> >  drivers/input/keyboard/iqs62x-keys.c | 340 +++++++++++++++++++++++++++++++++++
> >  3 files changed, 351 insertions(+)
> >  create mode 100644 drivers/input/keyboard/iqs62x-keys.c
> > 
> > diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> > index 8911bc2..ab10aff 100644
> > --- a/drivers/input/keyboard/Kconfig
> > +++ b/drivers/input/keyboard/Kconfig
> > @@ -657,6 +657,16 @@ config KEYBOARD_IPAQ_MICRO
> >  	  To compile this driver as a module, choose M here: the
> >  	  module will be called ipaq-micro-keys.
> >  
> > +config KEYBOARD_IQS62X
> > +	tristate "Azoteq IQS620A/621/622/624/625 touch keys"
> > +	depends on MFD_IQS62X
> > +	help
> > +	  Say Y here to enable touch-key support for six-channel members of
> > +	  the Azoteq ProxFusion family of sensor devices.
> > +
> > +	  To compile this driver as a module, choose M here: the module will
> > +	  be called iqs62x-keys.
> > +
> >  config KEYBOARD_OMAP
> >  	tristate "TI OMAP keypad support"
> >  	depends on ARCH_OMAP1
> > diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
> > index 9510325..ee85b7f 100644
> > --- a/drivers/input/keyboard/Makefile
> > +++ b/drivers/input/keyboard/Makefile
> > @@ -28,6 +28,7 @@ obj-$(CONFIG_KEYBOARD_TCA8418)		+= tca8418_keypad.o
> >  obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
> >  obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
> >  obj-$(CONFIG_KEYBOARD_IPAQ_MICRO)	+= ipaq-micro-keys.o
> > +obj-$(CONFIG_KEYBOARD_IQS62X)		+= iqs62x-keys.o
> >  obj-$(CONFIG_KEYBOARD_IMX)		+= imx_keypad.o
> >  obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
> >  obj-$(CONFIG_KEYBOARD_HP7XX)		+= jornada720_kbd.o
> > diff --git a/drivers/input/keyboard/iqs62x-keys.c b/drivers/input/keyboard/iqs62x-keys.c
> > new file mode 100644
> > index 0000000..9d929f1
> > --- /dev/null
> > +++ b/drivers/input/keyboard/iqs62x-keys.c
> > @@ -0,0 +1,340 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Azoteq IQS620A/621/622/624/625 Touch Keys
> > + *
> > + * Copyright (C) 2019
> > + * Author: Jeff LaBundy <jeff@xxxxxxxxxxx>
> > + */
> > +
> > +#include <linux/device.h>
> > +#include <linux/input.h>
> > +#include <linux/kernel.h>
> > +#include <linux/mfd/iqs62x.h>
> > +#include <linux/module.h>
> > +#include <linux/notifier.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +#include <linux/slab.h>
> > +
> > +enum {
> > +	IQS62X_SW_HALL_N,
> > +	IQS62X_SW_HALL_S,
> > +};
> > +
> > +static const char * const iqs62x_switch_names[] = {
> > +	[IQS62X_SW_HALL_N] = "hall_switch_north",
> > +	[IQS62X_SW_HALL_S] = "hall_switch_south",
> > +};
> > +
> > +struct iqs62x_switch_desc {
> > +	enum iqs62x_event_flag flag;
> > +	unsigned int code;
> > +	bool enabled;
> > +};
> > +
> > +struct iqs62x_keys_private {
> > +	struct iqs62x_core *iqs62x;
> > +	struct input_dev *input;
> > +	struct notifier_block notifier;
> > +	struct iqs62x_switch_desc switches[ARRAY_SIZE(iqs62x_switch_names)];
> > +	unsigned int keycode[IQS62X_NUM_KEYS];
> > +	unsigned int keycodemax;
> > +	u8 interval;
> > +};
> > +
> > +static int iqs62x_keys_parse_prop(struct platform_device *pdev,
> > +				  struct iqs62x_keys_private *iqs62x_keys)
> > +{
> > +	struct device_node *keys_node = pdev->dev.of_node;
> > +	struct device_node *hall_node;
> > +	unsigned int val;
> > +	int ret, i;
> > +
> > +	if (!keys_node)
> > +		return 0;
> > +
> > +	ret = of_property_read_variable_u32_array(keys_node, "linux,keycodes",
> > +						  iqs62x_keys->keycode, 0,
> > +						  IQS62X_NUM_KEYS);
> 
> I do not think this has to be OF-specific, so please use
> device_property_*() API.
> 

Sure thing; will do.

> > +	if (ret < 0) {
> > +		dev_err(&pdev->dev, "Failed to read keycodes: %d\n", ret);
> > +		return ret;
> > +	}
> > +	iqs62x_keys->keycodemax = ret;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++) {
> > +		hall_node = of_get_child_by_name(keys_node,
> > +						 iqs62x_switch_names[i]);
> > +		if (!hall_node)
> > +			continue;
> > +
> > +		ret = of_property_read_u32(hall_node, "linux,code", &val);
> > +		if (ret < 0) {
> > +			dev_err(&pdev->dev, "Failed to read switch code: %d\n",
> > +				ret);
> > +			of_node_put(hall_node);
> > +			return ret;
> > +		}
> > +
> > +		if (of_property_read_bool(hall_node, "azoteq,use-prox"))
> > +			iqs62x_keys->switches[i].flag = (i == IQS62X_SW_HALL_N ?
> > +							 IQS62X_EVENT_HALL_N_P :
> > +							 IQS62X_EVENT_HALL_S_P);
> > +		else
> > +			iqs62x_keys->switches[i].flag = (i == IQS62X_SW_HALL_N ?
> > +							 IQS62X_EVENT_HALL_N_T :
> > +							 IQS62X_EVENT_HALL_S_T);
> > +
> > +		iqs62x_keys->switches[i].code = val;
> > +		iqs62x_keys->switches[i].enabled = true;
> > +
> > +		of_node_put(hall_node);
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int iqs62x_keys_init(struct iqs62x_keys_private *iqs62x_keys)
> > +{
> > +	struct iqs62x_core *iqs62x = iqs62x_keys->iqs62x;
> > +	enum iqs62x_event_flag flag;
> > +	unsigned int event_mask_reg;
> > +	unsigned int event_mask = 0;
> > +	unsigned int val;
> > +	int error, i;
> > +
> > +	switch (iqs62x->dev_desc->prod_num) {
> > +	case IQS620_PROD_NUM:
> > +	case IQS621_PROD_NUM:
> > +	case IQS622_PROD_NUM:
> > +		event_mask_reg = IQS620_GLBL_EVENT_MASK;
> > +
> > +		/*
> > +		 * Discreet button, hysteresis and SAR UI flags represent keys
> > +		 * and are unmasked if mapped to a valid keycode.
> > +		 */
> > +		for (i = 0; i < iqs62x_keys->keycodemax; i++) {
> > +			if (iqs62x_keys->keycode[i] == KEY_RESERVED)
> > +				continue;
> > +
> > +			if (iqs62x_events[i].reg == IQS62X_EVENT_PROX)
> > +				event_mask |= iqs62x->dev_desc->prox_mask;
> > +			else if (iqs62x_events[i].reg == IQS62X_EVENT_HYST)
> > +				event_mask |= (iqs62x->dev_desc->hyst_mask |
> > +					       iqs62x->dev_desc->sar_mask);
> > +		}
> > +
> > +		error = regmap_read(iqs62x->map, iqs62x->dev_desc->hall_flags,
> > +				    &val);
> > +		if (error)
> > +			return error;
> > +
> > +		/*
> > +		 * Hall UI flags represent switches and are unmasked if their
> > +		 * corresponding child nodes are present.
> > +		 */
> > +		for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++) {
> > +			if (!(iqs62x_keys->switches[i].enabled))
> > +				continue;
> > +
> > +			flag = iqs62x_keys->switches[i].flag;
> > +
> > +			if (iqs62x_events[flag].reg != IQS62X_EVENT_HALL)
> > +				continue;
> > +
> > +			event_mask |= iqs62x->dev_desc->hall_mask;
> > +
> > +			input_report_switch(iqs62x_keys->input,
> > +					    iqs62x_keys->switches[i].code,
> > +					    (val & iqs62x_events[flag].mask) ==
> > +					    iqs62x_events[flag].val);
> > +		}
> > +
> > +		input_sync(iqs62x_keys->input);
> > +		break;
> > +
> > +	case IQS624_PROD_NUM:
> > +		event_mask_reg = IQS624_HALL_UI;
> > +
> > +		/*
> > +		 * Interval change events represent keys and are unmasked if
> > +		 * either wheel movement flag is mapped to a valid keycode.
> > +		 */
> > +		if (iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_UP] != KEY_RESERVED)
> > +			event_mask |= IQS624_HALL_UI_INT_EVENT;
> > +
> > +		if (iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_DN] != KEY_RESERVED)
> > +			event_mask |= IQS624_HALL_UI_INT_EVENT;
> > +
> > +		error = regmap_read(iqs62x->map, iqs62x->dev_desc->interval,
> > +				    &val);
> > +		if (error)
> > +			return error;
> > +
> > +		iqs62x_keys->interval = val;
> > +		break;
> > +
> > +	default:
> > +		return 0;
> > +	}
> > +
> > +	return regmap_update_bits(iqs62x->map, event_mask_reg, event_mask, 0);
> > +}
> > +
> > +static int iqs62x_keys_notifier(struct notifier_block *notifier,
> > +				unsigned long event_flags, void *context)
> > +{
> > +	struct iqs62x_event_data *event_data = context;
> > +	struct iqs62x_keys_private *iqs62x_keys;
> > +	int error, i;
> > +
> > +	iqs62x_keys = container_of(notifier, struct iqs62x_keys_private,
> > +				   notifier);
> > +
> > +	if (event_flags & BIT(IQS62X_EVENT_SYS_RESET)) {
> > +		error = iqs62x_keys_init(iqs62x_keys);
> > +		if (error) {
> > +			dev_err(iqs62x_keys->input->dev.parent,
> > +				"Failed to re-initialize device: %d\n", error);
> > +			return NOTIFY_BAD;
> > +		}
> > +
> > +		return NOTIFY_OK;
> > +	}
> > +
> > +	for (i = 0; i < iqs62x_keys->keycodemax; i++) {
> > +		if (iqs62x_events[i].reg == IQS62X_EVENT_WHEEL &&
> > +		    event_data->interval == iqs62x_keys->interval)
> > +			continue;
> > +
> > +		input_report_key(iqs62x_keys->input, iqs62x_keys->keycode[i],
> > +				 event_flags & BIT(i));
> > +	}
> > +
> > +	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++)
> > +		if (iqs62x_keys->switches[i].enabled)
> > +			input_report_switch(iqs62x_keys->input,
> > +					    iqs62x_keys->switches[i].code,
> > +					    event_flags &
> > +					    BIT(iqs62x_keys->switches[i].flag));
> > +
> > +	input_sync(iqs62x_keys->input);
> > +
> > +	if (event_data->interval == iqs62x_keys->interval)
> > +		return NOTIFY_OK;
> > +
> > +	/*
> > +	 * Each frame contains at most one wheel event (up or down), in which
> > +	 * case a full keystroke is emulated.
> > +	 */
> > +	if (event_flags & BIT(IQS62X_EVENT_WHEEL_UP)) {
> > +		input_report_key(iqs62x_keys->input,
> > +				 iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_UP],
> > +				 0);
> > +		input_sync(iqs62x_keys->input);
> > +	} else if (event_flags & BIT(IQS62X_EVENT_WHEEL_DN)) {
> > +		input_report_key(iqs62x_keys->input,
> > +				 iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_DN],
> > +				 0);
> 
> Not '1'?
> 

We pick up the '1' in the first of the two for loops above so long as the wheel
moved "enough." In this case (and this case only), a subsequent '0' is sent to
emulate a full press/release cycle (2 * {EV_KEY + EV_SYN}) for wheel "ticks."

I will update the comment to say "...in which case a complementary release cycle
is emulated." If I have misunderstood your concern, please let me know.

> > +		input_sync(iqs62x_keys->input);
> > +	}
> > +
> > +	iqs62x_keys->interval = event_data->interval;
> > +
> > +	return NOTIFY_OK;
> > +}
> > +
> > +static int iqs62x_keys_probe(struct platform_device *pdev)
> > +{
> > +	struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
> > +	struct iqs62x_keys_private *iqs62x_keys;
> > +	struct input_dev *input;
> > +	int error, i;
> > +
> > +	iqs62x_keys = devm_kzalloc(&pdev->dev, sizeof(*iqs62x_keys),
> > +				   GFP_KERNEL);
> > +	if (!iqs62x_keys)
> > +		return -ENOMEM;
> > +
> > +	platform_set_drvdata(pdev, iqs62x_keys);
> > +
> > +	error = iqs62x_keys_parse_prop(pdev, iqs62x_keys);
> > +	if (error)
> > +		return error;
> > +
> > +	input = devm_input_allocate_device(&pdev->dev);
> > +	if (!input)
> > +		return -ENOMEM;
> > +
> > +	input->keycodemax = iqs62x_keys->keycodemax;
> > +	input->keycode = iqs62x_keys->keycode;
> > +	input->keycodesize = sizeof(*iqs62x_keys->keycode);
> > +
> > +	input->name = iqs62x->dev_desc->dev_name;
> > +	input->id.bustype = BUS_I2C;
> > +
> > +	__set_bit(EV_KEY, input->evbit);
> > +
> > +	for (i = 0; i < iqs62x_keys->keycodemax; i++)
> > +		__set_bit(iqs62x_keys->keycode[i], input->keybit);
> > +
> > +	__clear_bit(KEY_RESERVED, input->keybit);
> > +
> > +	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++)
> > +		if (iqs62x_keys->switches[i].enabled) {
> > +			__set_bit(EV_SW, input->evbit);
> > +			__set_bit(iqs62x_keys->switches[i].code, input->swbit);
> > +		}
> > +
> > +	iqs62x_keys->iqs62x = iqs62x;
> > +	iqs62x_keys->input = input;
> > +
> > +	error = iqs62x_keys_init(iqs62x_keys);
> > +	if (error) {
> > +		dev_err(&pdev->dev, "Failed to initialize device: %d\n", error);
> > +		return error;
> > +	}
> > +
> > +	error = input_register_device(iqs62x_keys->input);
> > +	if (error) {
> > +		dev_err(&pdev->dev, "Failed to register device: %d\n", error);
> > +		return error;
> > +	}
> > +
> > +	iqs62x_keys->notifier.notifier_call = iqs62x_keys_notifier;
> > +	error = blocking_notifier_chain_register(&iqs62x_keys->iqs62x->nh,
> > +						 &iqs62x_keys->notifier);
> > +	if (error)
> > +		dev_err(&pdev->dev, "Failed to register notifier: %d\n", error);
> > +
> > +	return error;
> > +}
> > +
> > +static int iqs62x_keys_remove(struct platform_device *pdev)
> > +{
> > +	struct iqs62x_keys_private *iqs62x_keys = platform_get_drvdata(pdev);
> > +	int error;
> > +
> > +	error = blocking_notifier_chain_unregister(&iqs62x_keys->iqs62x->nh,
> > +						   &iqs62x_keys->notifier);
> > +	if (error)
> > +		dev_err(&pdev->dev,
> > +			"Failed to unregister notifier: %d\n", error);
> > +
> > +	return error;
> > +}
> > +
> > +static struct platform_driver iqs62x_keys_platform_driver = {
> > +	.driver = {
> > +		.name	= IQS62X_DRV_NAME_KEYS,
> > +	},
> > +	.probe		= iqs62x_keys_probe,
> > +	.remove		= iqs62x_keys_remove,
> > +};
> > +module_platform_driver(iqs62x_keys_platform_driver);
> > +
> > +MODULE_AUTHOR("Jeff LaBundy <jeff@xxxxxxxxxxx>");
> > +MODULE_DESCRIPTION("Azoteq IQS620A/621/622/624/625 Touch Keys");
> > +MODULE_LICENSE("GPL");
> > +MODULE_ALIAS("platform:" IQS62X_DRV_NAME_KEYS);
> > -- 
> > 2.7.4
> > 
> 
> Thanks.
> 
> -- 
> Dmitry
> 

Kind regards,
Jeff LaBundy



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux