Re: [PATCH v3] HID: add driver for U2F Zero built-in LED and RNG

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 3 Oct 2019, Andrej Shadura wrote:

> On 01/04/2019 14:42, Andrej Shadura wrote:
> > U2F Zero supports custom commands for blinking the LED and getting data
> > from the internal hardware RNG. Expose the blinking function as a LED
> > device, and the internal hardware RNG as an HWRNG so that it can be used
> > to feed the enthropy pool.
> > 
> > Signed-off-by: Andrej Shadura <andrew.shadura@xxxxxxxxxxxxxxx>
> 
> I’ve been testing this with a different modification of U2F Zero,
> Nitrokey FIDO U2F, and on that device only I’m getting a kernel warning
> (see below).
> 
> > +static int u2fzero_recv(struct u2fzero_device *dev,
> > +			struct u2f_hid_report *req,
> > +			struct u2f_hid_msg *resp)
> > +{
> > +	int ret;
> > +	struct hid_device *hdev = dev->hdev;
> > +	struct u2fzero_transfer_context ctx;
> > +
> > +	mutex_lock(&dev->lock);
> > +
> > +	memcpy(dev->buf_out, req, sizeof(struct u2f_hid_report));
> > +
> > +	dev->urb->context = &ctx;
> > +	init_completion(&ctx.done);
> > +
> > +	ret = usb_submit_urb(dev->urb, GFP_NOIO);
> 
> Here, usb_submit_urb() returns EBUSY in the first attempt to read random
> numbers from the device:
> 
> URB ffff917256d5d540 submitted while active
> WARNING: CPU: 3 PID: 31 at drivers/usb/core/urb.c:363
> usb_submit_urb+0x4c2/0x5b0
> <...>
> Call Trace:
>  u2fzero_rng_read+0x16e/0x340 [hid_u2fzero]
>  ? ttwu_do_activate+0x67/0x90
>  add_early_randomness+0x53/0xc0
>  hwrng_register+0x175/0x180
>  devm_hwrng_register+0x41/0x7e
>  u2fzero_probe+0x2dd/0x350 [hid_u2fzero]
>  hid_device_probe+0x119/0x180 [hid]
>  really_probe+0xfe/0x3b0
>  driver_probe_device+0xba/0x100
>  __device_attach_driver+0x97/0x100
> 
> I don’t understand why since 1) it’s likely to be the first transmission
> of this URB, 2) there’s a mutex locked just before it. I received a
> comment from a colleague mentioning I’m probably not using the mutex
> correctly, but I don’t understand why.
> 
> I’m trying to figure this out, so I’d welcome any help with it.

You can try using usbmon to see exactly what URBs are actually running.

Alan Stern




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux