On 01/04/2019 14:42, Andrej Shadura wrote:
> U2F Zero supports custom commands for blinking the LED and getting data
> from the internal hardware RNG. Expose the blinking function as a LED
> device, and the internal hardware RNG as an HWRNG so that it can be used
> to feed the enthropy pool.
>
> Signed-off-by: Andrej Shadura <andrew.shadura@xxxxxxxxxxxxxxx>
I’ve been testing this with a different modification of U2F Zero,
Nitrokey FIDO U2F, and on that device only I’m getting a kernel warning
(see below).
> +static int u2fzero_recv(struct u2fzero_device *dev,
> + struct u2f_hid_report *req,
> + struct u2f_hid_msg *resp)
> +{
> + int ret;
> + struct hid_device *hdev = dev->hdev;
> + struct u2fzero_transfer_context ctx;
> +
> + mutex_lock(&dev->lock);
> +
> + memcpy(dev->buf_out, req, sizeof(struct u2f_hid_report));
> +
> + dev->urb->context = &ctx;
> + init_completion(&ctx.done);
> +
> + ret = usb_submit_urb(dev->urb, GFP_NOIO);
Here, usb_submit_urb() returns EBUSY in the first attempt to read random
numbers from the device:
URB ffff917256d5d540 submitted while active
WARNING: CPU: 3 PID: 31 at drivers/usb/core/urb.c:363
usb_submit_urb+0x4c2/0x5b0
<...>
Call Trace:
u2fzero_rng_read+0x16e/0x340 [hid_u2fzero]
? ttwu_do_activate+0x67/0x90
add_early_randomness+0x53/0xc0
hwrng_register+0x175/0x180
devm_hwrng_register+0x41/0x7e
u2fzero_probe+0x2dd/0x350 [hid_u2fzero]
hid_device_probe+0x119/0x180 [hid]
really_probe+0xfe/0x3b0
driver_probe_device+0xba/0x100
__device_attach_driver+0x97/0x100
I don’t understand why since 1) it’s likely to be the first transmission
of this URB, 2) there’s a mutex locked just before it. I received a
comment from a colleague mentioning I’m probably not using the mutex
correctly, but I don’t understand why.
I’m trying to figure this out, so I’d welcome any help with it.
Thanks in advance.
> + if (unlikely(ret)) {
> + hid_err(hdev, "usb_submit_urb failed: %d", ret);
> + goto err;
> + }
> +
> + ret = hid_hw_output_report(dev->hdev, dev->buf_out,
> + sizeof(struct u2f_hid_msg));
> +
> + if (ret < 0) {
> + hid_err(hdev, "hid_hw_output_report failed: %d", ret);
> + goto err;
> + }
> +
> + ret = (wait_for_completion_timeout(
> + &ctx.done, msecs_to_jiffies(USB_CTRL_SET_TIMEOUT)));
> + if (ret < 0) {
> + usb_kill_urb(dev->urb);
> + hid_err(hdev, "urb submission timed out");
> + } else {
> + ret = dev->urb->actual_length;
> + memcpy(resp, dev->buf_in, ret);
> + }
> +
> +err:
> + mutex_unlock(&dev->lock);
> +
> + return ret;
> +}
<...>
> +static int u2fzero_rng_read(struct hwrng *rng, void *data,
> + size_t max, bool wait)
> +{
> + struct u2fzero_device *dev = container_of(rng,
> + struct u2fzero_device, hwrng);
> + struct u2f_hid_report req = {
> + .report_type = 0,
> + .msg.cid = CID_BROADCAST,
> + .msg.init = {
> + .cmd = U2F_CUSTOM_GET_RNG,
> + .bcnth = 0,
> + .bcntl = 0,
> + .data = {0},
> + }
> + };
> + struct u2f_hid_msg resp;
> + int ret;
> + size_t actual_length;
> +
> + if (!dev->present) {
> + hid_dbg(dev->hdev, "device not present");
> + return 0;
> + }
> +
> + ret = u2fzero_recv(dev, &req, &resp);
> + if (ret < 0)
> + return 0;
> +
> + /* only take the minimum amount of data it is safe to take */
> + actual_length = min3((size_t)ret - offsetof(struct u2f_hid_msg,
> + init.data), U2F_HID_MSG_LEN(resp), max);
> +
> + memcpy(data, resp.init.data, actual_length);
> +
> + return actual_length;
> +}
<...>
> +static int u2fzero_init_hwrng(struct u2fzero_device *dev,
> + unsigned int minor)
> +{
> + dev->rng_name = devm_kasprintf(&dev->hdev->dev, GFP_KERNEL,
> + "%s-rng%u", DRIVER_SHORT, minor);
> + if (dev->rng_name == NULL)
> + return -ENOMEM;
> +
> + dev->hwrng.name = dev->rng_name;
> + dev->hwrng.read = u2fzero_rng_read;
> + dev->hwrng.quality = 1;
> +
> + return devm_hwrng_register(&dev->hdev->dev, &dev->hwrng);
> +}
> +
> +static int u2fzero_fill_in_urb(struct u2fzero_device *dev)
> +{
> + struct hid_device *hdev = dev->hdev;
> + struct usb_device *udev;
> + struct usbhid_device *usbhid = hdev->driver_data;
> + unsigned int pipe_in;
> + struct usb_host_endpoint *ep;
> +
> + if (dev->hdev->bus != BUS_USB)
> + return -EINVAL;
> +
> + udev = hid_to_usb_dev(hdev);
> +
> + if (!usbhid->urbout || !usbhid->urbin)
> + return -ENODEV;
> +
> + ep = usb_pipe_endpoint(udev, usbhid->urbin->pipe);
> + if (!ep)
> + return -ENODEV;
> +
> + dev->urb = usb_alloc_urb(0, GFP_KERNEL);
> + if (!dev->urb)
> + return -ENOMEM;
> +
> + pipe_in = (usbhid->urbin->pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30);
> +
> + usb_fill_int_urb(dev->urb,
> + udev,
> + pipe_in,
> + dev->buf_in,
> + HID_REPORT_SIZE,
> + u2fzero_read_callback,
> + NULL,
> + ep->desc.bInterval);
> +
> + return 0;
> +}
> +
> +static int u2fzero_probe(struct hid_device *hdev,
> + const struct hid_device_id *id)
> +{
> + struct u2fzero_device *dev;
> + unsigned int minor;
> + int ret;
> +
> + dev = devm_kzalloc(&hdev->dev, sizeof(*dev), GFP_KERNEL);
> + if (dev == NULL)
> + return -ENOMEM;
> +
> + dev->buf_out = devm_kmalloc(&hdev->dev,
> + sizeof(struct u2f_hid_report), GFP_KERNEL);
> + if (dev->buf_out == NULL)
> + return -ENOMEM;
> +
> + dev->buf_in = devm_kmalloc(&hdev->dev,
> + sizeof(struct u2f_hid_msg), GFP_KERNEL);
> + if (dev->buf_in == NULL)
> + return -ENOMEM;
> +
> + ret = hid_parse(hdev);
> + if (ret)
> + return ret;
> +
> + dev->hdev = hdev;
> + hid_set_drvdata(hdev, dev);
> + mutex_init(&dev->lock);
> +
> + ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
> + if (ret)
> + return ret;
> +
> + u2fzero_fill_in_urb(dev);
> +
> + dev->present = true;
> +
> + minor = ((struct hidraw *) hdev->hidraw)->minor;
> +
> + ret = u2fzero_init_led(dev, minor);
> + if (ret) {
> + hid_hw_stop(hdev);
> + return ret;
> + }
> +
> + hid_info(hdev, "U2F Zero LED initialised\n");
> +
> + ret = u2fzero_init_hwrng(dev, minor);
> + if (ret) {
> + hid_hw_stop(hdev);
> + return ret;
> + }
> +
> + hid_info(hdev, "U2F Zero RNG initialised\n");
> +
> + return 0;
> +}
--
Cheers,
Andrej
