Re: [PATCH v4 8/9] MIPS: SGI-IP27: fix readb/writeb addressing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Aug 9, 2019 at 1:34 PM Thomas Bogendoerfer
<tbogendoerfer@xxxxxxx> wrote:
>
> Our chosen byte swapping, which is what firmware already uses, is to
> do readl/writel by normal lw/sw intructions (data invariance). This
> also means we need to mangle addresses for u8 and u16 accesses. The
> mangling for 16bit has been done aready, but 8bit one was missing.
> Correcting this causes different addresses for accesses to the
> SuperIO and local bus of the IOC3 chip. This is fixed by changing
> byte order in ioc3 and m48rtc_rtc structs.

>  /* serial port register map */
>  struct ioc3_serialregs {
> -       uint32_t        sscr;
> -       uint32_t        stpir;
> -       uint32_t        stcir;
> -       uint32_t        srpir;
> -       uint32_t        srcir;
> -       uint32_t        srtr;
> -       uint32_t        shadow;
> +       u32     sscr;
> +       u32     stpir;
> +       u32     stcir;
> +       u32     srpir;
> +       u32     srcir;
> +       u32     srtr;
> +       u32     shadow;
>  };

Isn't it a churn? AFAIU kernel documentation the uint32_t is okay to
use, just be consistent inside one module / driver.
Am I mistaken?


-- 
With Best Regards,
Andy Shevchenko



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux