SGI IOC3 ASIC includes support for ethernet, PS2 keyboard/mouse, NIC (number in a can), GPIO and a byte bus. By attaching a SuperIO chip to it, it also supports serial lines and a parallel port. The chip is used on a variety of SGI systems with different configurations. This patchset moves code out of the network driver, which doesn't belong there, into its new place a MFD driver and specific platform drivers for the different subfunctions. Changes in v4: - added w1 drivers to the series after merge in 5.3 failed because of no response from maintainer and other parts of this series won't work without that drivers - moved ip30 systemboard support to the ip30 series, which will deal with rtc oddity Lee found - converted to use devm_platform_ioremap_resource - use PLATFORM_DEVID_AUTO for serial, ethernet and serio in mfd driver - fixed reverse christmas order in ioc3-eth.c - formating issue found by Lee - re-worked irq request/free in serio driver to avoid crashes during probe/remove Changes in v3: - use 1-wire subsystem for handling proms - pci-xtalk driver uses prom information to create PCI subsystem ids for use in MFD driver - changed MFD driver to only use static declared mfd_cells - added IP30 system board setup to MFD driver - mac address is now read from ioc3-eth driver with nvmem framework Changes in v2: - fixed issue in ioc3kbd.c reported by Dmitry Torokhov - merged IP27 RTC removal and 8250 serial driver addition into main MFD patch to keep patches bisectable Thomas Bogendoerfer (9): w1: add 1-wire master driver for IP block found in SGI ASICs w1: add DS2501, DS2502, DS2505 EPROM device driver nvmem: core: add nvmem_device_find MIPS: PCI: refactor ioc3 special handling MIPS: PCI: use information from 1-wire PROM for IOC3 detection MIPS: SGI-IP27: remove ioc3 ethernet init mfd: ioc3: Add driver for SGI IOC3 chip MIPS: SGI-IP27: fix readb/writeb addressing Input: add IOC3 serio driver arch/mips/include/asm/mach-ip27/mangle-port.h | 4 +- arch/mips/include/asm/pci/bridge.h | 1 + arch/mips/include/asm/sn/ioc3.h | 356 ++--- arch/mips/pci/pci-xtalk-bridge.c | 296 ++-- arch/mips/sgi-ip27/ip27-console.c | 5 +- arch/mips/sgi-ip27/ip27-init.c | 13 - arch/mips/sgi-ip27/ip27-timer.c | 20 - arch/mips/sgi-ip27/ip27-xtalk.c | 38 +- drivers/input/serio/Kconfig | 10 + drivers/input/serio/Makefile | 1 + drivers/input/serio/ioc3kbd.c | 163 +++ drivers/mfd/Kconfig | 13 + drivers/mfd/Makefile | 1 + drivers/mfd/ioc3.c | 586 ++++++++ drivers/net/ethernet/sgi/Kconfig | 4 +- drivers/net/ethernet/sgi/ioc3-eth.c | 1936 ++++++++++--------------- drivers/nvmem/core.c | 62 +- drivers/rtc/rtc-m48t35.c | 11 + drivers/tty/serial/8250/8250_ioc3.c | 98 ++ drivers/tty/serial/8250/Kconfig | 11 + drivers/tty/serial/8250/Makefile | 1 + drivers/w1/masters/Kconfig | 9 + drivers/w1/masters/Makefile | 1 + drivers/w1/masters/sgi_w1.c | 130 ++ drivers/w1/slaves/Kconfig | 6 + drivers/w1/slaves/Makefile | 1 + drivers/w1/slaves/w1_ds250x.c | 293 ++++ include/linux/nvmem-consumer.h | 9 + include/linux/platform_data/sgi-w1.h | 15 + include/linux/w1.h | 2 + 30 files changed, 2522 insertions(+), 1574 deletions(-) create mode 100644 drivers/input/serio/ioc3kbd.c create mode 100644 drivers/mfd/ioc3.c create mode 100644 drivers/tty/serial/8250/8250_ioc3.c create mode 100644 drivers/w1/masters/sgi_w1.c create mode 100644 drivers/w1/slaves/w1_ds250x.c create mode 100644 include/linux/platform_data/sgi-w1.h -- 2.13.7
