Use devm_gpiod_get_optional() and gpiod_set_value_cansleep() instead
of the old API. The st1232_ts_power() now passes on the inverted "poweron"
value to reflect the correct logical value.
Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxxxxxxxx>
---
ok. tested. If i get that right, assigning different gpio functions
would now be difficult, but afaik isn't needed anyways.
thanks
martin
revision history
----------------
v2: retain dts compatibility by allowing current reset-gpios setting
drivers/input/touchscreen/st1232.c | 22 ++++++++++------------
1 file changed, 10 insertions(+), 12 deletions(-)
diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
index 634d6c243845..1fbc0847416b 100644
--- a/drivers/input/touchscreen/st1232.c
+++ b/drivers/input/touchscreen/st1232.c
@@ -45,7 +45,7 @@ struct st1232_ts_data {
struct i2c_client *client;
struct input_dev *input_dev;
struct dev_pm_qos_request low_latency_req;
- int reset_gpio;
+ struct gpio_desc *reset_gpio;
const struct st_chip_info *chip_info;
int read_buf_len;
u8 *read_buf;
@@ -142,8 +142,8 @@ static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id)
static void st1232_ts_power(struct st1232_ts_data *ts, bool poweron)
{
- if (gpio_is_valid(ts->reset_gpio))
- gpio_direction_output(ts->reset_gpio, poweron);
+ if (ts->reset_gpio)
+ gpiod_set_value_cansleep(ts->reset_gpio, !poweron);
}
static const struct st_chip_info st1232_chip_info = {
@@ -215,15 +215,13 @@ static int st1232_ts_probe(struct i2c_client *client,
ts->client = client;
ts->input_dev = input_dev;
- ts->reset_gpio = of_get_gpio(client->dev.of_node, 0);
- if (gpio_is_valid(ts->reset_gpio)) {
- error = devm_gpio_request(&client->dev, ts->reset_gpio, NULL);
- if (error) {
- dev_err(&client->dev,
- "Unable to request GPIO pin %d.\n",
- ts->reset_gpio);
- return error;
- }
+ ts->reset_gpio = devm_gpiod_get_optional(&client->dev, NULL,
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(ts->reset_gpio)) {
+ error = PTR_ERR(ts->reset_gpio);
+ dev_err(&client->dev, "Unable to request GPIO pin: %d.\n",
+ error);
+ return error;
}
st1232_ts_power(ts, true);
--
2.20.1
Attachment:
smime.p7s
Description: S/MIME cryptographic signature
