> On Jan 18, 2019, at 23:50, Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx> wrote:
>
> Hi Kai-Heng,
>
> On Mon, Jan 7, 2019 at 8:24 AM Kai-Heng Feng
> <kai.heng.feng@xxxxxxxxxxxxx> wrote:
>>
>> While using Elan touchpads, the message floods:
>> [ 136.138487] i2c_hid i2c-DELL08D6:00: i2c_hid_get_input: incomplete report (14/65535)
>>
>> Though the message flood is annoying, the device it self works without
>> any issue. I suspect that the device in question takes too much time to
>> pull the IRQ back to high after I2C host has done reading its data.
>>
>> Since the host receives all useful data, let's ignore the input report
>> when there's no data.
>>
>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
>
> Thanks for the v3.
>
> This patch has just been brought to my attention, and I have one
> question before applying it:
> are those messages (without your patch) occurring all the time, or
> just after resume?
All the time.
The touchpad works fine though. The entire report is 0xff, so it can be
safely ignored.
>
> I wonder if the pm_suspend delay we talked about in the other thread
> would fix that issue in a cleaner way.
I’ve replied in another thread, unfortunately it can’t.
We can introduce msleep() between each commands though, but I don’t
think it’s good either.
Kai-Heng
>
> Cheers,
> Benjamin
>
>> ---
>> v3:
>> Fix compiler error/warnings.
>>
>> v2:
>> Use dev_warn_once() to warn the user about the situation.
>>
>> drivers/hid/i2c-hid/i2c-hid-core.c | 9 +++++++++
>> 1 file changed, 9 insertions(+)
>>
>> diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
>> index 8555ce7e737b..2f940c1de616 100644
>> --- a/drivers/hid/i2c-hid/i2c-hid-core.c
>> +++ b/drivers/hid/i2c-hid/i2c-hid-core.c
>> @@ -50,6 +50,7 @@
>> #define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(1)
>> #define I2C_HID_QUIRK_NO_RUNTIME_PM BIT(2)
>> #define I2C_HID_QUIRK_DELAY_AFTER_SLEEP BIT(3)
>> +#define I2C_HID_QUIRK_BOGUS_IRQ BIT(4)
>>
>> /* flags */
>> #define I2C_HID_STARTED 0
>> @@ -179,6 +180,8 @@ static const struct i2c_hid_quirks {
>> I2C_HID_QUIRK_DELAY_AFTER_SLEEP },
>> { USB_VENDOR_ID_LG, I2C_DEVICE_ID_LG_8001,
>> I2C_HID_QUIRK_NO_RUNTIME_PM },
>> + { USB_VENDOR_ID_ELAN, HID_ANY_ID,
>> + I2C_HID_QUIRK_BOGUS_IRQ },
>> { 0, 0 }
>> };
>>
>> @@ -503,6 +506,12 @@ static void i2c_hid_get_input(struct i2c_hid *ihid)
>> return;
>> }
>>
>> + if (ihid->quirks & I2C_HID_QUIRK_BOGUS_IRQ && ret_size == 0xffff) {
>> + dev_warn_once(&ihid->client->dev, "%s: IRQ triggered but "
>> + "there's no data\n", __func__);
>> + return;
>> + }
>> +
>> if ((ret_size > size) || (ret_size < 2)) {
>> dev_err(&ihid->client->dev, "%s: incomplete report (%d/%d)\n",
>> __func__, size, ret_size);
>> --
>> 2.17.1
>>
