Hi Benjamin,
On Tue, Oct 2, 2018 at 1:53 AM Benjamin Tissoires
<benjamin.tissoires@xxxxxxxxxx> wrote:
>
> Hi Dmitry,
>
> On Mon, Oct 1, 2018 at 11:39 PM Dmitry Torokhov <dtor@xxxxxxxxxxxx> wrote:
> >
> > This adds dedicated "Whiskers" driver that hooks both into HID and EC to
> > produce proper SW_TABLET_SWITCH event from base presence bit from EC and
> > base state (folded/unfolded) coming from USB/HID.
> >
> > Signed-off-by: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
> > Signed-off-by: Dmitry Torokhov <dtor@xxxxxxxxxxxx>
> > ---
>
> I have a few comments, see below.
>
> > drivers/hid/Kconfig | 6 +
> > drivers/hid/Makefile | 1 +
> > drivers/hid/hid-google-hammer.c | 7 +-
> > drivers/hid/hid-google-whiskers.c | 382 ++++++++++++++++++++++++++++++
> > 4 files changed, 392 insertions(+), 4 deletions(-)
> > create mode 100644 drivers/hid/hid-google-whiskers.c
> >
> > diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
> > index e5ec47705fa2..0607f1c7129e 100644
> > --- a/drivers/hid/Kconfig
> > +++ b/drivers/hid/Kconfig
> > @@ -355,6 +355,12 @@ config HID_GOOGLE_HAMMER
> > ---help---
> > Say Y here if you have a Google Hammer device.
> >
> > +config HID_GOOGLE_WHISKERS
> > + tristate "Google Whiskers Keyboard"
> > + depends on HID_GOOGLE_HAMMER && MFD_CROS_EC
> > + ---help---
> > + Say Y here if you have a Google Whiskers device.
> > +
> > config HID_GT683R
> > tristate "MSI GT68xR LED support"
> > depends on LEDS_CLASS && USB_HID
> > diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
> > index bd7ac53b75c5..241e583b6913 100644
> > --- a/drivers/hid/Makefile
> > +++ b/drivers/hid/Makefile
> > @@ -47,6 +47,7 @@ obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o
> > obj-$(CONFIG_HID_GEMBIRD) += hid-gembird.o
> > obj-$(CONFIG_HID_GFRM) += hid-gfrm.o
> > obj-$(CONFIG_HID_GOOGLE_HAMMER) += hid-google-hammer.o
> > +obj-$(CONFIG_HID_GOOGLE_WHISKERS) += hid-google-whiskers.o
> > obj-$(CONFIG_HID_GT683R) += hid-gt683r.o
> > obj-$(CONFIG_HID_GYRATION) += hid-gyration.o
> > obj-$(CONFIG_HID_HOLTEK) += hid-holtek-kbd.o
> > diff --git a/drivers/hid/hid-google-hammer.c b/drivers/hid/hid-google-hammer.c
> > index 6bf4da7ad63a..81ddf9773df9 100644
> > --- a/drivers/hid/hid-google-hammer.c
> > +++ b/drivers/hid/hid-google-hammer.c
> > @@ -18,6 +18,7 @@
> > #include <linux/module.h>
> >
> > #include "hid-ids.h"
> > +#include "hid-google-hammer.h"
>
> hid-google-hammer.h doesn't seem to be part of the patch (or in my
> local tree at least).
Ugh, my bad.
>
> >
> > #define MAX_BRIGHTNESS 100
> >
> > @@ -90,8 +91,7 @@ static int hammer_register_leds(struct hid_device *hdev)
> > return devm_led_classdev_register(&hdev->dev, &kbd_backlight->cdev);
> > }
> >
> > -static int hammer_input_configured(struct hid_device *hdev,
> > - struct hid_input *hi)
> > +int hammer_input_configured(struct hid_device *hdev, struct hid_input *hi)
> > {
> > struct list_head *report_list =
> > &hdev->report_enum[HID_OUTPUT_REPORT].report_list;
> > @@ -116,6 +116,7 @@ static int hammer_input_configured(struct hid_device *hdev,
> >
> > return 0;
> > }
> > +EXPORT_SYMBOL_GPL(hammer_input_configured);
>
> I am not sure there is a need to separate the driver in 2 for whiskers
> if it still need the LED settings from hammer.
>
> Given that the whiskers_ec struct will be populated independently,
> having a common code path would not hurt hammer anyway.
The idea is that we we have device with Hammer, we do not need to load
bunch of code that deals with properly supporting Whiskers (connecting
to the EC, creating a tablet switch device).
>
> >
> > static const struct hid_device_id hammer_devices[] = {
> > { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
> > @@ -124,8 +125,6 @@ static const struct hid_device_id hammer_devices[] = {
> > USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_STAFF) },
> > { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
> > USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_WAND) },
> > - { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
> > - USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_WHISKERS) },
> > { }
> > };
> > MODULE_DEVICE_TABLE(hid, hammer_devices);
> > diff --git a/drivers/hid/hid-google-whiskers.c b/drivers/hid/hid-google-whiskers.c
> > new file mode 100644
> > index 000000000000..ff3d2bfa1194
> > --- /dev/null
> > +++ b/drivers/hid/hid-google-whiskers.c
> > @@ -0,0 +1,382 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +//
> > +// HID driver for Google Whiskers device.
> > +//
> > +// Copyright (c) 2018 Google Inc.
> > +
> > +#include <linux/acpi.h>
> > +#include <linux/hid.h>
> > +#include <linux/leds.h>
>
> doesn't seem to be used
Indeed, will drop.
>
> > +#include <linux/mfd/cros_ec.h>
> > +#include <linux/mfd/cros_ec_commands.h>
> > +#include <linux/module.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_wakeup.h>
> > +#include <linux/usb.h>
>
> This is usually not a good sign in HID drivers to rely on the low
> level transport.
> Basically, if you replay the device through uhid, this tends to break
> heavily the kernel.
The data parsing relies solely on HID, USB is here just to make sure
we bind to the right interface, as you can see below.
>
> > +#include <asm/unaligned.h>
> > +
> > +#include "hid-ids.h"
> > +#include "hid-google-hammer.h"
> > +
> > +#define HID_UP_GOOGLEVENDOR 0xffd10000
> > +#define HID_VD_KBD_FOLDED 0x00000019
> > +#define WHISKERS_KBD_FOLDED (HID_UP_GOOGLEVENDOR | HID_VD_KBD_FOLDED)
>
> Huh, this is weird there is no standard HID usage for this (not that
> you can do anything about it).
This is really specific to this device, I am not sure if it makes
sense to standardize it. I guess we'll see if we make more of these.
>
> > +
> > +struct whiskers_ec {
> > + struct device *dev; /* The platform device (EC) */
> > + struct input_dev *input;
> > + bool base_present;
> > + struct notifier_block notifier;
> > +};
> > +
> > +static struct whiskers_ec whiskers_ec;
> > +static DEFINE_SPINLOCK(whiskers_ec_lock);
> > +static DEFINE_MUTEX(whiskers_ec_reglock);
> > +
> > +static bool whiskers_parse_base_state(const void *data)
> > +{
> > + u32 switches = get_unaligned_le32(data);
> > +
> > + return !!(switches & BIT(EC_MKBP_BASE_ATTACHED));
> > +}
> > +
> > +static int whiskers_ec_query_base(struct cros_ec_device *ec_dev, bool get_state,
> > + bool *state)
> > +{
> > + struct ec_params_mkbp_info *params;
> > + struct cros_ec_command *msg;
> > + int ret;
> > +
> > + msg = kzalloc(sizeof(*msg) + max(sizeof(u32), sizeof(*params)),
> > + GFP_KERNEL);
> > + if (!msg)
> > + return -ENOMEM;
> > +
> > + msg->command = EC_CMD_MKBP_INFO;
> > + msg->version = 1;
> > + msg->outsize = sizeof(*params);
> > + msg->insize = sizeof(u32);
> > + params = (struct ec_params_mkbp_info *)msg->data;
> > + params->info_type = get_state ?
> > + EC_MKBP_INFO_CURRENT : EC_MKBP_INFO_SUPPORTED;
> > + params->event_type = EC_MKBP_EVENT_SWITCH;
> > +
> > + ret = cros_ec_cmd_xfer_status(ec_dev, msg);
> > + if (ret >= 0) {
> > + if (ret != sizeof(u32)) {
> > + dev_warn(ec_dev->dev, "wrong result size: %d != %zu\n",
> > + ret, sizeof(u32));
> > + ret = -EPROTO;
> > + } else {
> > + *state = whiskers_parse_base_state(msg->data);
> > + ret = 0;
> > + }
> > + }
> > +
> > + kfree(msg);
> > +
> > + return ret;
> > +}
> > +
> > +static int whiskers_ec_notify(struct notifier_block *nb,
> > + unsigned long queued_during_suspend,
> > + void *_notify)
> > +{
> > + struct cros_ec_device *ec = _notify;
> > + unsigned long flags;
> > + bool base_present;
> > +
> > + if (ec->event_data.event_type == EC_MKBP_EVENT_SWITCH) {
> > + base_present = whiskers_parse_base_state(
> > + &ec->event_data.data.switches);
> > + dev_dbg(whiskers_ec.dev,
> > + "%s: base: %d\n", __func__, base_present);
> > +
> > + if (device_may_wakeup(whiskers_ec.dev) ||
> > + !queued_during_suspend) {
> > +
> > + pm_wakeup_event(whiskers_ec.dev, 0);
> > +
> > + spin_lock_irqsave(&whiskers_ec_lock, flags);
> > +
> > + /*
> > + * While input layer dedupes the events, we do not want
> > + * to disrupt the state reported by the base by
> > + * overriding it with state reported by the LID. Only
> > + * report changes, as we assume that on attach the base
> > + * is not folded.
> > + */
> > + if (base_present != whiskers_ec.base_present) {
> > + input_report_switch(whiskers_ec.input,
> > + SW_TABLET_MODE,
> > + !base_present);
> > + input_sync(whiskers_ec.input);
> > + whiskers_ec.base_present = base_present;
> > + }
> > +
> > + spin_unlock_irqrestore(&whiskers_ec_lock, flags);
> > + }
> > + }
> > +
> > + return NOTIFY_OK;
> > +}
> > +
> > +static __maybe_unused int whiskers_ec_resume(struct device *dev)
> > +{
> > + struct cros_ec_device *ec = dev_get_drvdata(dev->parent);
> > + bool base_present;
> > + int error;
> > +
> > + error = whiskers_ec_query_base(ec, true, &base_present);
> > + if (error) {
> > + dev_warn(dev, "failed to fetch base state on resume: %d\n",
> > + error);
> > + } else {
> > + spin_lock_irq(&whiskers_ec_lock);
> > +
> > + whiskers_ec.base_present = base_present;
> > +
> > + /*
> > + * Only report if base is disconnected. If base is connected,
> > + * it will resend its state on resume, and we'll update it
> > + * in whiskers_event().
> > + */
> > + if (!whiskers_ec.base_present) {
> > + input_report_switch(whiskers_ec.input,
> > + SW_TABLET_MODE, 1);
> > + input_sync(whiskers_ec.input);
> > + }
> > +
> > + spin_unlock_irq(&whiskers_ec_lock);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static SIMPLE_DEV_PM_OPS(whiskers_ec_pm_ops, NULL, whiskers_ec_resume);
> > +
> > +static void whiskers_ec_set_input(struct input_dev *input)
> > +{
> > + /* Take the lock so whiskers_event does not race with us here */
> > + spin_lock_irq(&whiskers_ec_lock);
> > + whiskers_ec.input = input;
> > + spin_unlock_irq(&whiskers_ec_lock);
> > +}
> > +
> > +static int __whiskers_ec_probe(struct platform_device *pdev)
> > +{
> > + struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
> > + struct input_dev *input;
> > + bool base_supported;
> > + int error;
> > +
> > + error = whiskers_ec_query_base(ec, false, &base_supported);
> > + if (error)
> > + return error;
> > +
> > + if (!base_supported)
> > + return -ENXIO;
> > +
> > + input = devm_input_allocate_device(&pdev->dev);
> > + if (!input)
> > + return -ENOMEM;
> > +
> > + input->name = "Whiskers Tablet Mode Switch";
> > +
> > + input->id.bustype = BUS_HOST;
> > + input->id.version = 1;
> > + input->id.product = 0;
>
> I wonder if you should not set the vendor to USB_VENDOR_ID_GOOGLE and
> the product to something better.
This is not USB interface, but host one (coming from the EC), so
USB_VENDOR_ID_GOOGLE does not make sense here. I think I'll simply
remove version and product.
>
> > +
> > + input_set_capability(input, EV_SW, SW_TABLET_MODE);
> > +
> > + error = input_register_device(input);
> > + if (error) {
> > + dev_err(&pdev->dev, "cannot register input device: %d\n",
> > + error);
> > + return error;
> > + }
> > +
> > + /* Seed the state */
> > + error = whiskers_ec_query_base(ec, true, &whiskers_ec.base_present);
> > + if (error) {
> > + dev_err(&pdev->dev, "cannot query base state: %d\n", error);
> > + return error;
> > + }
> > +
> > + input_report_switch(input, SW_TABLET_MODE, !whiskers_ec.base_present);
> > +
> > + whiskers_ec_set_input(input);
> > +
> > + whiskers_ec.dev = &pdev->dev;
> > + whiskers_ec.notifier.notifier_call = whiskers_ec_notify;
> > + error = blocking_notifier_chain_register(&ec->event_notifier,
> > + &whiskers_ec.notifier);
> > + if (error) {
> > + dev_err(&pdev->dev, "cannot register notifier: %d\n", error);
> > + whiskers_ec_set_input(NULL);
> > + return error;
> > + }
> > +
> > + device_init_wakeup(&pdev->dev, true);
> > + return 0;
> > +}
> > +
> > +static int whiskers_ec_probe(struct platform_device *pdev)
> > +{
> > + int retval;
> > +
> > + mutex_lock(&whiskers_ec_reglock);
> > +
> > + if (whiskers_ec.input) {
> > + retval = -EBUSY;
> > + goto out;
> > + }
> > +
> > + retval = __whiskers_ec_probe(pdev);
> > +
> > +out:
> > + mutex_unlock(&whiskers_ec_reglock);
> > + return retval;
> > +}
> > +
> > +static int whiskers_ec_remove(struct platform_device *pdev)
> > +{
> > + struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
> > +
> > + mutex_lock(&whiskers_ec_reglock);
> > +
> > + blocking_notifier_chain_unregister(&ec->event_notifier,
> > + &whiskers_ec.notifier);
> > + whiskers_ec_set_input(NULL);
> > +
> > + mutex_unlock(&whiskers_ec_reglock);
> > + return 0;
> > +}
> > +
> > +static const struct acpi_device_id whiskers_ec_acpi_ids[] = {
> > + { "GOOG000B", 0 },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(acpi, whiskers_ec_acpi_ids);
> > +
> > +static struct platform_driver whiskers_ec_driver = {
> > + .probe = whiskers_ec_probe,
> > + .remove = whiskers_ec_remove,
> > + .driver = {
> > + .name = "whiskers_ec",
> > + .acpi_match_table = ACPI_PTR(whiskers_ec_acpi_ids),
> > + .pm = &whiskers_ec_pm_ops,
> > + },
> > +};
> > +
> > +static int whiskers_input_mapping(struct hid_device *hdev, struct hid_input *hi,
> > + struct hid_field *field,
> > + struct hid_usage *usage,
> > + unsigned long **bit, int *max)
> > +{
> > + if (usage->hid == WHISKERS_KBD_FOLDED) {
> > + /*
> > + * We do not want to have this usage mapped as it will get
> > + * mixed in with "base attached" signal and delivered over
> > + * separate input device for tablet switch mode.
> > + */
> > +
> > + return -1;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int whiskers_event(struct hid_device *hid, struct hid_field *field,
> > + struct hid_usage *usage, __s32 value)
> > +{
> > + unsigned long flags;
> > +
> > + if (usage->hid == WHISKERS_KBD_FOLDED) {
> > + spin_lock_irqsave(&whiskers_ec_lock, flags);
> > +
> > + hid_dbg(hid, "%s: base: %d, folded: %d\n", __func__,
> > + whiskers_ec.base_present, value);
> > +
> > + /*
> > + * We should not get event if base is detached, but in case
> > + * we happen to service HID and EC notifications out of order
> > + * let's still check the "base present" flag.
> > + */
> > + if (whiskers_ec.input && whiskers_ec.base_present) {
> > + input_report_switch(whiskers_ec.input,
> > + SW_TABLET_MODE, value);
> > + input_sync(whiskers_ec.input);
> > + }
> > +
> > + spin_unlock_irqrestore(&whiskers_ec_lock, flags);
> > + return 1; /* We handled this event */
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int whiskers_probe(struct hid_device *hdev,
> > + const struct hid_device_id *id)
> > +{
> > + struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
>
> As mentioned earlier, this is prone to kernel oopses when using uhid.
Hmm, we have similar code in hid-google-hammer.c, I guess we need to
fix that there too.
>
> > + int ret;
> > +
> > + /*
> > + * We always want to poll for, and handle tablet mode events, even when
> > + * nobody has opened the input device. This also prevents the hid core
> > + * from dropping early tablet mode events from the device.
> > + */
> > + if (intf->cur_altsetting->desc.bInterfaceProtocol ==
> > + USB_INTERFACE_PROTOCOL_KEYBOARD)
>
> Can't you rely on something embedded in the report descriptor instead?
> This way you can drop the USB dependency.
Something like:
static bool hammer_is_keyboard(...)
{
rep_enum = &hdev->report_enum[HID_INPUT_REPORT];
list_for_each_entry(report, &rep_enum->report_list, list) {
for (i = 0; i < report->maxfield; i++) {
if (report->field[i].application == HID_GD_KEYBOARD)
return true;
}
return false;
}
?
>
> > + hdev->quirks |= HID_QUIRK_ALWAYS_POLL;
> > +
> > + ret = hid_parse(hdev);
> > + if (!ret)
> > + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
> > +
> > + return ret;
> > +}
> > +
> > +static const struct hid_device_id whiskers_hid_devices[] = {
> > + { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
> > + USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_WHISKERS) },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(hid, whiskers_hid_devices);
> > +
> > +static struct hid_driver whiskers_hid_driver = {
> > + .name = "whiskers",
> > + .id_table = whiskers_hid_devices,
> > + .probe = whiskers_probe,
> > + .input_configured = hammer_input_configured,
> > + .input_mapping = whiskers_input_mapping,
> > + .event = whiskers_event,
> > +};
> > +
> > +static int __init whiskers_init(void)
> > +{
> > + int error;
> > +
> > + error = platform_driver_register(&whiskers_ec_driver);
> > + if (error)
> > + return error;
> > +
> > + error = hid_register_driver(&whiskers_hid_driver);
> > + if (error) {
> > + platform_driver_unregister(&whiskers_ec_driver);
> > + return error;
> > + }
> > +
> > + return 0;
> > +}
> > +module_init(whiskers_init);
> > +
> > +static void __exit whiskers_exit(void)
> > +{
> > + hid_unregister_driver(&whiskers_hid_driver);
> > + platform_driver_unregister(&whiskers_ec_driver);
> > +}
> > +module_exit(whiskers_exit);
> > +
> > +MODULE_LICENSE("GPL");
> > --
> > 2.19.0.605.g01d371f741-goog
> >
>
Thanks.
--
Dmitry
