On Tue, Jul 31, 2018 at 10:18:06AM +0530, Vinod Koul wrote:
> In order to support resin thru the pwrkey driver (they are very
> similar in nature) we need to abstract the handling in this driver.
>
> First we abstract pull_up_bit and status_bit along in driver data.
> The event code sent for key events is quiried from DT.
>
> Since the device can be child of pon lookup regmap and reg from
> parent if lookup fails (we are child).
>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
> ---
> drivers/input/misc/pm8941-pwrkey.c | 61 ++++++++++++++++++++++++++++++--------
> 1 file changed, 48 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
> index 18ad956454f1..2047e34c0982 100644
> --- a/drivers/input/misc/pm8941-pwrkey.c
> +++ b/drivers/input/misc/pm8941-pwrkey.c
> @@ -20,6 +20,7 @@
> #include <linux/log2.h>
> #include <linux/module.h>
> #include <linux/of.h>
> +#include <linux/of_device.h>
> #include <linux/platform_device.h>
> #include <linux/reboot.h>
> #include <linux/regmap.h>
> @@ -42,6 +43,10 @@
> #define PON_DBC_CTL 0x71
> #define PON_DBC_DELAY_MASK 0x7
>
> +struct pm8941_data {
> + unsigned int pull_up_bit;
> + unsigned int status_bit;
> +};
>
> struct pm8941_pwrkey {
> struct device *dev;
> @@ -52,6 +57,9 @@ struct pm8941_pwrkey {
>
> unsigned int revision;
> struct notifier_block reboot_notifier;
> +
> + u32 code;
> + const struct pm8941_data *data;
> };
>
> static int pm8941_reboot_notify(struct notifier_block *nb,
> @@ -124,7 +132,8 @@ static irqreturn_t pm8941_pwrkey_irq(int irq, void *_data)
> if (error)
> return IRQ_HANDLED;
>
> - input_report_key(pwrkey->input, KEY_POWER, !!(sts & PON_KPDPWR_N_SET));
> + input_report_key(pwrkey->input, pwrkey->code,
> + sts & pwrkey->data->status_bit);
> input_sync(pwrkey->input);
>
> return IRQ_HANDLED;
> @@ -157,6 +166,7 @@ static int pm8941_pwrkey_probe(struct platform_device *pdev)
> {
> struct pm8941_pwrkey *pwrkey;
> bool pull_up;
> + struct device *parent;
> u32 req_delay;
> int error;
>
> @@ -175,12 +185,30 @@ static int pm8941_pwrkey_probe(struct platform_device *pdev)
> return -ENOMEM;
>
> pwrkey->dev = &pdev->dev;
> + pwrkey->data = of_device_get_match_data(&pdev->dev);
>
> - pwrkey->regmap = dev_get_regmap(pdev->dev.parent, NULL);
> + parent = pdev->dev.parent;
> + pwrkey->regmap = dev_get_regmap(parent, NULL);
> if (!pwrkey->regmap) {
> - dev_err(&pdev->dev, "failed to locate regmap\n");
> - return -ENODEV;
> + /*
> + * we failed to get regmap for parent
> + * Check if we are child on pon and read regmap and reg from
> + * parent
> + */
> + pwrkey->regmap = dev_get_regmap(parent->parent, NULL);
> + if (!pwrkey->regmap) {
> + dev_err(&pdev->dev, "failed to locate regmap\n");
> + return -ENODEV;
> + }
> +
> + error = of_property_read_u32(parent->of_node,
> + "reg", &pwrkey->baseaddr);
> + } else {
> + error = of_property_read_u32(pdev->dev.of_node, "reg",
> + &pwrkey->baseaddr);
> }
> + if (error)
> + return error;
>
> pwrkey->irq = platform_get_irq(pdev, 0);
> if (pwrkey->irq < 0) {
> @@ -188,11 +216,6 @@ static int pm8941_pwrkey_probe(struct platform_device *pdev)
> return pwrkey->irq;
> }
>
> - error = of_property_read_u32(pdev->dev.of_node, "reg",
> - &pwrkey->baseaddr);
> - if (error)
> - return error;
> -
> error = regmap_read(pwrkey->regmap, pwrkey->baseaddr + PON_REV2,
> &pwrkey->revision);
> if (error) {
> @@ -200,13 +223,20 @@ static int pm8941_pwrkey_probe(struct platform_device *pdev)
> return error;
> }
>
> + error = of_property_read_u32(pdev->dev.of_node, "linux,code",
> + &pwrkey->code);
> + if (error) {
> + dev_info(&pdev->dev, "no linux,code assuming power%d\n", error);
I changed this to dev_dbg() and applied, thank you.
> + pwrkey->code = KEY_POWER;
> + }
> +
> pwrkey->input = devm_input_allocate_device(&pdev->dev);
> if (!pwrkey->input) {
> dev_dbg(&pdev->dev, "unable to allocate input device\n");
> return -ENOMEM;
> }
>
> - input_set_capability(pwrkey->input, EV_KEY, KEY_POWER);
> + input_set_capability(pwrkey->input, EV_KEY, pwrkey->code);
>
> pwrkey->input->name = "pm8941_pwrkey";
> pwrkey->input->phys = "pm8941_pwrkey/input0";
> @@ -225,8 +255,8 @@ static int pm8941_pwrkey_probe(struct platform_device *pdev)
>
> error = regmap_update_bits(pwrkey->regmap,
> pwrkey->baseaddr + PON_PULL_CTL,
> - PON_KPDPWR_PULL_UP,
> - pull_up ? PON_KPDPWR_PULL_UP : 0);
> + pwrkey->data->pull_up_bit,
> + pull_up ? pwrkey->data->pull_up_bit : 0);
> if (error) {
> dev_err(&pdev->dev, "failed to set pull: %d\n", error);
> return error;
> @@ -271,8 +301,13 @@ static int pm8941_pwrkey_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static const struct pm8941_data pwrkey_data = {
> + .pull_up_bit = PON_KPDPWR_PULL_UP,
> + .status_bit = PON_KPDPWR_N_SET,
> +};
> +
> static const struct of_device_id pm8941_pwr_key_id_table[] = {
> - { .compatible = "qcom,pm8941-pwrkey" },
> + { .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
> { }
> };
> MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table);
> --
> 2.14.4
>
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
