Hi Vinod,
On Tue, Jul 31, 2018 at 10:18:07AM +0530, Vinod Koul wrote:
> Since handling is abstracted in this driver, we need to add resin entry
> in id table along with pwrkey_data.
>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
I added "qcom,pm8941-resin" to the binding doc and applied. Thank you.
> ---
> drivers/input/misc/pm8941-pwrkey.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
> index 2047e34c0982..6547a57f5222 100644
> --- a/drivers/input/misc/pm8941-pwrkey.c
> +++ b/drivers/input/misc/pm8941-pwrkey.c
> @@ -29,6 +29,7 @@
>
> #define PON_RT_STS 0x10
> #define PON_KPDPWR_N_SET BIT(0)
> +#define PON_RESIN_N_SET BIT(1)
>
> #define PON_PS_HOLD_RST_CTL 0x5a
> #define PON_PS_HOLD_RST_CTL2 0x5b
> @@ -39,6 +40,7 @@
>
> #define PON_PULL_CTL 0x70
> #define PON_KPDPWR_PULL_UP BIT(1)
> +#define PON_RESIN_PULL_UP BIT(0)
>
> #define PON_DBC_CTL 0x71
> #define PON_DBC_DELAY_MASK 0x7
> @@ -306,8 +308,14 @@ static const struct pm8941_data pwrkey_data = {
> .status_bit = PON_KPDPWR_N_SET,
> };
>
> +static const struct pm8941_data resin_data = {
> + .pull_up_bit = PON_RESIN_PULL_UP,
> + .status_bit = PON_RESIN_N_SET,
> +};
> +
> static const struct of_device_id pm8941_pwr_key_id_table[] = {
> { .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
> + { .compatible = "qcom,pm8941-resin", .data = &resin_data },
> { }
> };
> MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table);
> --
> 2.14.4
>
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
