Hello Mylène,
On Wed, Jul 18, 2018 at 08:27:17PM +0200, Mylène Josserand wrote:
> Add the support of regulator to use it as VCC source.
>
> Signed-off-by: Mylène Josserand <mylene.josserand@xxxxxxxxxxx>
> ---
> .../bindings/input/touchscreen/edt-ft5x06.txt | 1 +
> drivers/input/touchscreen/edt-ft5x06.c | 29 ++++++++++++++++++++++
> 2 files changed, 30 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
> index 025cf8c9324a..48e975b9c1aa 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
> @@ -30,6 +30,7 @@ Required properties:
> Optional properties:
> - reset-gpios: GPIO specification for the RESET input
> - wake-gpios: GPIO specification for the WAKE input
> + - vcc-supply: Regulator that supplies the touchscreen
>
> - pinctrl-names: should be "default"
> - pinctrl-0: a phandle pointing to the pin settings for the
> diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
> index 1e18ca0d1b4e..aa94494b06b5 100644
> --- a/drivers/input/touchscreen/edt-ft5x06.c
> +++ b/drivers/input/touchscreen/edt-ft5x06.c
> @@ -39,6 +39,7 @@
> #include <linux/input/mt.h>
> #include <linux/input/touchscreen.h>
> #include <linux/of_device.h>
> +#include <linux/regulator/consumer.h>
>
> #define WORK_REGISTER_THRESHOLD 0x00
> #define WORK_REGISTER_REPORT_RATE 0x08
> @@ -91,6 +92,7 @@ struct edt_ft5x06_ts_data {
> struct touchscreen_properties prop;
> u16 num_x;
> u16 num_y;
> + struct regulator *vcc;
>
> struct gpio_desc *reset_gpio;
> struct gpio_desc *wake_gpio;
> @@ -991,6 +993,22 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
>
> tsdata->max_support_points = chip_data->max_support_points;
>
> + tsdata->vcc = devm_regulator_get(&client->dev, "vcc");
> + if (IS_ERR(tsdata->vcc)) {
> + error = PTR_ERR(tsdata->vcc);
> + if (error != -EPROBE_DEFER)
> + dev_err(&client->dev, "failed to request regulator: %d\n",
> + error);
> + return error;
> + }
> +
> + error = regulator_enable(tsdata->vcc);
> + if (error < 0) {
> + dev_err(&client->dev, "failed to enable vcc: %d\n",
> + error);
> + return error;
> + }
> +
> tsdata->reset_gpio = devm_gpiod_get_optional(&client->dev,
> "reset", GPIOD_OUT_HIGH);
> if (IS_ERR(tsdata->reset_gpio)) {
> @@ -1120,20 +1138,31 @@ static int edt_ft5x06_ts_remove(struct i2c_client *client)
> static int __maybe_unused edt_ft5x06_ts_suspend(struct device *dev)
> {
> struct i2c_client *client = to_i2c_client(dev);
> + struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
>
> if (device_may_wakeup(dev))
> enable_irq_wake(client->irq);
>
> + regulator_disable(tsdata->vcc);
> +
How will the touchscreen wakeup the system with interrupt if you power it off
on suspend? Perhaps guard this with device_may_wakeup() too?
> return 0;
> }
>
> static int __maybe_unused edt_ft5x06_ts_resume(struct device *dev)
> {
> struct i2c_client *client = to_i2c_client(dev);
> + struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
> + int ret;
>
> if (device_may_wakeup(dev))
> disable_irq_wake(client->irq);
>
> + ret = regulator_enable(tsdata->vcc);
> + if (ret < 0) {
> + dev_err(dev, "failed to enable vcc: %d\n", ret);
> + return ret;
> + }
> +
Ditto.
Regards,
o.
> return 0;
> }
>
> --
> 2.11.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
