Martin Kepplinger | Entwicklung Software GINZINGER ELECTRONIC SYSTEMS GMBH Tel.: +43 7723 5422 157 Mail: martin.kepplinger@xxxxxxxxxxxxx Web: www.ginzinger.com On 2018-02-05 11:07, Christian Gmeiner wrote: > Hi all. > > 2017-04-27 14:22 GMT+02:00 Martin Kepplinger <martin.kepplinger@xxxxxxxxxxxxx>: >> The device could as well be in command mode, in which this driver cannot >> handle the device. When opening the device, let's make sure the device >> will be in the mode we expect it to be for this driver. >> > > I run into issues caused by this change. It turns out that the device > is non-functional > after some warm-reboots and as a result I am not able to use xorg's > evdev driver. > So I have some questions about this change: > > * Should we enable irq before calling i2c_master_send(..) as the chip raises an > irq if the command was processed? > > * Would it be enough to send this command only once during driver > lifetime? I can > see that on my system open gets called 3 times during boot-up. It would. See below for my thought on this change. > > * What are the circumstances the touch device would be in an other state? In the > official kernel driver the userspace can send commands via sysfs. > Also the driver > does set the touch enable mode as this patch does. I did this change as the device was once non-functional unexpectedly because it wasn't in touch mode. We can set touch mode during open() or probe() but I figured during open() would keep the driver working even when others would use the device in command mode. Does your problem go away when you revert this change or put it into probe()? martin ________________________________________ Ginzinger electronic systems GmbH Gewerbegebiet Pirath 16 4952 Weng im Innkreis www.ginzinger.com Firmenbuchnummer: FN 364958d Firmenbuchgericht: Ried im Innkreis UID-Nr.: ATU66521089 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html