Re: PROBLEM: Changing speed on ThinkPad X1 Carbon 5th trackpoint causes "failed to enable mouse"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The set on sysfs "speed" will execute the following code:
1, set #define PSMOUSE_CMD_DISABLE     0x00f5;
2, set #define TP_SPEED                0x60    /* Speed of TP Cursor */
with the value in speed.
3, set #define PSMOUSE_CMD_ENABLE      0x00f4

When set 3rd step, it fails to write the cmd to ps2dev.
This issue should be related to trackpoint firmware that response on all
commands.

And for the trackpoint is too fast or sensitive, please change it in
setting of gnome (I assume you are using), the setting will use the
libinput(wayland) and xerver-input-synaptics driver to set the mouse
speed. It should be worked as expected.

Regards,
Aaron

On 12/28/2017 10:28 PM, Sebastian Schmidt wrote:
> On Thu, Dec 28, 2017 at 06:56:36PM +0800, Aaron Ma wrote:
>> I haven't met your issue on X1 Carbon 5th, but Lenovo did ship different
>> touchapd/trackpoint on X1 Carbon 5th. And you didn't provide the whole
>> dmesg with pnd ID in it. so I can't tell if the hardware or firmware is
>> the same as I tested.
> 
> Sorry. I have attached a full dmesg below.
> 
>> Could you try smbus mode first on mainline kernel?
>>
>> 1, download kernel package from:
>> http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.15-rc5/
>>    I am not sure if it can be installed and work well on debian.
>>    It enabled RMI4_SMB and SYNAPTICS_SMBUS.
>> 2, boot with this kernel with "psmouse.synaptics_intertouch=1" in your
>> kernel cmdline.
> 
> I’ve re-built my kernel with RMI4_SMB set and booted with
> psmouse.synaptics_intertouch=1, which gave the device a new sysfs path
> and the Touchpad’s(!) name changed to “Synaptics TM3289-002”. I can’t
> say that the pointer’s speed changed, and an attempt to re-set the speed
> to 97 resulted in the same error (cf. dmesg). Just for clarification:
> The trackpoint *does* work initially, albeit too fast for me. Setting
> the speed to anything causes it to break.
> 
>> If trackpoint still can not work, please send me the dmesg.
> 
> I can’t attach a dmesg of the kernel-ppa, because, seriously, there is a
> keylogger included?!?
> 
> [    0.666583] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
> [   10.836870] evbug: Connected device: input3 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
> 
> and then, for every keypress, a load of these in dmesg:
> [   60.585982] evbug: Event. Dev: input3, Type: 4, Code: 4, Value: 20
> [   60.585984] evbug: Event. Dev: input3, Type: 1, Code: 20, Value: 1
> [   60.585985] evbug: Event. Dev: input3, Type: 0, Code: 0, Value: 0
> [   60.586145] evbug: Event. Dev: input3, Type: 4, Code: 4, Value: 45
> [   60.586147] evbug: Event. Dev: input3, Type: 1, Code: 45, Value: 0
> 
> I’m not convinced that my password can’t be reconstructed from this and
> surprised that Ubuntu includes this, er, facility in the kernels
> recommended by <https://wiki.ubuntu.com/Kernel/MainlineBuilds>. I only
> have to go on and clean my log files now, but users with remote logging
> not controlled by them (and crash reporting facilities that include a
> dmesg output) don’t have this opportunity. But this is a separate
> discussion I’ll have with the Ubuntu security folks.
> 
> Thanks,
> 
> Sebastian
> 
> Full dmesg:
> [    0.000000] Linux version 4.15.0-rc5 (yath@marax) (gcc version 7.2.0 (Debian 7.2.0-18)) #1 SMP Thu Dec 28 13:34:19 CET 2017
> [    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.15.0-rc5 root=/dev/mapper/vg0-root ro net.ifnames=0 psmouse.synaptics_intertouch=1
> [    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
> [    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
> [    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
> [    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
> [    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
> [    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
> [    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
> [    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
> [    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
> [    0.000000] e820: BIOS-provided physical RAM map:
> [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
> [    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
> [    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000008bfff] usable
> [    0.000000] BIOS-e820: [mem 0x000000000008c000-0x00000000000fffff] reserved
> [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000045021fff] usable
> [    0.000000] BIOS-e820: [mem 0x0000000045022000-0x0000000045022fff] ACPI NVS
> [    0.000000] BIOS-e820: [mem 0x0000000045023000-0x0000000045023fff] reserved
> [    0.000000] BIOS-e820: [mem 0x0000000045024000-0x000000004e965fff] usable
> [    0.000000] BIOS-e820: [mem 0x000000004e966000-0x000000004ea2dfff] type 20
> [    0.000000] BIOS-e820: [mem 0x000000004ea2e000-0x000000004ff2cfff] reserved
> [    0.000000] BIOS-e820: [mem 0x000000004ff2d000-0x000000004ff4cfff] ACPI NVS
> [    0.000000] BIOS-e820: [mem 0x000000004ff4d000-0x000000004ff4dfff] reserved
> [    0.000000] BIOS-e820: [mem 0x000000004ff4e000-0x000000004ff99fff] ACPI NVS
> [    0.000000] BIOS-e820: [mem 0x000000004ff9a000-0x000000004fffefff] ACPI data
> [    0.000000] BIOS-e820: [mem 0x000000004ffff000-0x000000004fffffff] usable
> [    0.000000] BIOS-e820: [mem 0x0000000050000000-0x0000000057ffffff] reserved
> [    0.000000] BIOS-e820: [mem 0x0000000058600000-0x000000005c7fffff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000fe010000-0x00000000fe010fff] reserved
> [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004a17fffff] usable
> [    0.000000] NX (Execute Disable) protection: active
> [    0.000000] efi: EFI v2.50 by Lenovo
> [    0.000000] efi:  SMBIOS=0x4f0c0000  SMBIOS 3.0=0x4f0bd000  ACPI=0x4fffe000  ACPI 2.0=0x4fffe014  MPS=0x4f469000  MEMATTR=0x49608018 
> [    0.000000] random: fast init done
> [    0.000000] SMBIOS 3.0.0 present.
> [    0.000000] DMI: LENOVO 20HRCTO1WW/20HRCTO1WW, BIOS N1MET39W (1.24 ) 09/27/2017
> [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [    0.000000] e820: last_pfn = 0x4a1800 max_arch_pfn = 0x400000000
> [    0.000000] MTRR default type: write-back
> [    0.000000] MTRR fixed ranges enabled:
> [    0.000000]   00000-9FFFF write-back
> [    0.000000]   A0000-BFFFF uncachable
> [    0.000000]   C0000-FFFFF write-protect
> [    0.000000] MTRR variable ranges enabled:
> [    0.000000]   0 base 0080000000 mask 7F80000000 uncachable
> [    0.000000]   1 base 0060000000 mask 7FE0000000 uncachable
> [    0.000000]   2 base 005C000000 mask 7FFC000000 uncachable
> [    0.000000]   3 base 005A000000 mask 7FFE000000 uncachable
> [    0.000000]   4 disabled
> [    0.000000]   5 disabled
> [    0.000000]   6 disabled
> [    0.000000]   7 disabled
> [    0.000000]   8 disabled
> [    0.000000]   9 disabled
> [    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
> [    0.000000] e820: last_pfn = 0x50000 max_arch_pfn = 0x400000000
> [    0.000000] Base memory trampoline at [        (ptrval)] 60000 size 24576
> [    0.000000] Using GB pages for direct mapping
> [    0.000000] BRK [0x13b603000, 0x13b603fff] PGTABLE
> [    0.000000] BRK [0x13b604000, 0x13b604fff] PGTABLE
> [    0.000000] BRK [0x13b605000, 0x13b605fff] PGTABLE
> [    0.000000] BRK [0x13b606000, 0x13b606fff] PGTABLE
> [    0.000000] BRK [0x13b607000, 0x13b607fff] PGTABLE
> [    0.000000] BRK [0x13b608000, 0x13b608fff] PGTABLE
> [    0.000000] BRK [0x13b609000, 0x13b609fff] PGTABLE
> [    0.000000] BRK [0x13b60a000, 0x13b60afff] PGTABLE
> [    0.000000] BRK [0x13b60b000, 0x13b60bfff] PGTABLE
> [    0.000000] Secure boot could not be determined
> [    0.000000] RAMDISK: [mem 0x34e6b000-0x3672cfff]
> [    0.000000] ACPI: Early table checksum verification disabled
> [    0.000000] ACPI: RSDP 0x000000004FFFE014 000024 (v02 LENOVO)
> [    0.000000] ACPI: XSDT 0x000000004FFC2188 0000FC (v01 LENOVO TP-N1M   00001240 PTEC 00000002)
> [    0.000000] ACPI: FACP 0x000000004FFF5000 0000F4 (v05 LENOVO TP-N1M   00001240 PTEC 00000002)
> [    0.000000] ACPI: DSDT 0x000000004FFD0000 020B92 (v02 LENOVO SKL      00000000 INTL 20160527)
> [    0.000000] ACPI: FACS 0x000000004FF3C000 000040
> [    0.000000] ACPI: SSDT 0x000000004FFFC000 0003CC (v02 LENOVO Tpm2Tabl 00001000 INTL 20160527)
> [    0.000000] ACPI: TPM2 0x000000004FFFB000 000034 (v03 LENOVO TP-N1M   00001240 PTEC 00000002)
> [    0.000000] ACPI: UEFI 0x000000004FF53000 000042 (v01 LENOVO TP-N1M   00001240 PTEC 00000002)
> [    0.000000] ACPI: SSDT 0x000000004FFF7000 003235 (v02 LENOVO SaSsdt   00003000 INTL 20160527)
> [    0.000000] ACPI: SSDT 0x000000004FFF6000 0005B6 (v02 LENOVO PerfTune 00001000 INTL 20160527)
> [    0.000000] ACPI: HPET 0x000000004FFF4000 000038 (v01 LENOVO TP-N1M   00001240 PTEC 00000002)
> [    0.000000] ACPI: APIC 0x000000004FFF3000 0000BC (v03 LENOVO TP-N1M   00001240 PTEC 00000002)
> [    0.000000] ACPI: MCFG 0x000000004FFF2000 00003C (v01 LENOVO TP-N1M   00001240 PTEC 00000002)
> [    0.000000] ACPI: ECDT 0x000000004FFF1000 000053 (v01 LENOVO TP-N1M   00001240 PTEC 00000002)
> [    0.000000] ACPI: SSDT 0x000000004FFCE000 001627 (v02 LENOVO ProjSsdt 00000010 INTL 20160527)
> [    0.000000] ACPI: BOOT 0x000000004FFCD000 000028 (v01 LENOVO TP-N1M   00001240 PTEC 00000002)
> [    0.000000] ACPI: BATB 0x000000004FFCC000 00004A (v02 LENOVO TP-N1M   00001240 PTEC 00000002)
> [    0.000000] ACPI: SLIC 0x000000004FFCB000 000176 (v01 LENOVO TP-N1M   00001240 PTEC 00000002)
> [    0.000000] ACPI: SSDT 0x000000004FFC9000 0017AE (v02 LENOVO CpuSsdt  00003000 INTL 20160527)
> [    0.000000] ACPI: SSDT 0x000000004FFC8000 00056D (v02 LENOVO CtdpB    00001000 INTL 20160527)
> [    0.000000] ACPI: SSDT 0x000000004FFC7000 000678 (v02 LENOVO UsbCTabl 00001000 INTL 20160527)
> [    0.000000] ACPI: WSMT 0x000000004FFC6000 000028 (v01 LENOVO TP-N1M   00001240 PTEC 00000002)
> [    0.000000] ACPI: SSDT 0x000000004FFC5000 000141 (v02 LENOVO HdaDsp   00000000 INTL 20160527)
> [    0.000000] ACPI: SSDT 0x000000004FFC4000 00050D (v02 LENOVO TbtTypeC 00000000 INTL 20160527)
> [    0.000000] ACPI: DBGP 0x000000004FFC3000 000034 (v01 LENOVO TP-N1M   00001240 PTEC 00000002)
> [    0.000000] ACPI: DBG2 0x000000004FFFD000 000054 (v00 LENOVO TP-N1M   00001240 PTEC 00000002)
> [    0.000000] ACPI: MSDM 0x000000004FFC1000 000055 (v03 LENOVO TP-N1M   00001240 PTEC 00000002)
> [    0.000000] ACPI: DMAR 0x000000004FFC0000 0000A8 (v01 LENOVO TP-N1M   00001240 PTEC 00000002)
> [    0.000000] ACPI: ASF! 0x000000004FFBF000 0000A0 (v32 LENOVO TP-N1M   00001240 PTEC 00000002)
> [    0.000000] ACPI: FPDT 0x000000004FFBE000 000044 (v01 LENOVO TP-N1M   00001240 PTEC 00000002)
> [    0.000000] ACPI: UEFI 0x000000004FF39000 00013E (v01 LENOVO TP-N1M   00001240 PTEC 00000002)
> [    0.000000] ACPI: Local APIC address 0xfee00000
> [    0.000000] No NUMA configuration found
> [    0.000000] Faking a node at [mem 0x0000000000000000-0x00000004a17fffff]
> [    0.000000] NODE_DATA(0) allocated [mem 0x4a17fb000-0x4a17fffff]
> [    0.000000] Zone ranges:
> [    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
> [    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
> [    0.000000]   Normal   [mem 0x0000000100000000-0x00000004a17fffff]
> [    0.000000]   Device   empty
> [    0.000000] Movable zone start for each node
> [    0.000000] Early memory node ranges
> [    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
> [    0.000000]   node   0: [mem 0x0000000000059000-0x000000000008bfff]
> [    0.000000]   node   0: [mem 0x0000000000100000-0x0000000045021fff]
> [    0.000000]   node   0: [mem 0x0000000045024000-0x000000004e965fff]
> [    0.000000]   node   0: [mem 0x000000004ffff000-0x000000004fffffff]
> [    0.000000]   node   0: [mem 0x0000000100000000-0x00000004a17fffff]
> [    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000004a17fffff]
> [    0.000000] On node 0 totalpages: 4129007
> [    0.000000]   DMA zone: 64 pages used for memmap
> [    0.000000]   DMA zone: 72 pages reserved
> [    0.000000]   DMA zone: 3978 pages, LIFO batch:0
> [    0.000000]   DMA32 zone: 4966 pages used for memmap
> [    0.000000]   DMA32 zone: 317797 pages, LIFO batch:31
> [    0.000000]   Normal zone: 59488 pages used for memmap
> [    0.000000]   Normal zone: 3807232 pages, LIFO batch:31
> [    0.000000] Reserved but unavailable: 100 pages
> [    0.000000] Reserving Intel graphics memory at 0x000000005a800000-0x000000005c7fffff
> [    0.000000] ACPI: PM-Timer IO Port: 0x1808
> [    0.000000] ACPI: Local APIC address 0xfee00000
> [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
> [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
> [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
> [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
> [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
> [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [    0.000000] ACPI: IRQ0 used by override.
> [    0.000000] ACPI: IRQ9 used by override.
> [    0.000000] Using ACPI (MADT) for SMP configuration information
> [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
> [    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
> [    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
> [    0.000000] PM: Registered nosave memory: [mem 0x0008c000-0x000fffff]
> [    0.000000] PM: Registered nosave memory: [mem 0x45022000-0x45022fff]
> [    0.000000] PM: Registered nosave memory: [mem 0x45023000-0x45023fff]
> [    0.000000] PM: Registered nosave memory: [mem 0x4e966000-0x4ea2dfff]
> [    0.000000] PM: Registered nosave memory: [mem 0x4ea2e000-0x4ff2cfff]
> [    0.000000] PM: Registered nosave memory: [mem 0x4ff2d000-0x4ff4cfff]
> [    0.000000] PM: Registered nosave memory: [mem 0x4ff4d000-0x4ff4dfff]
> [    0.000000] PM: Registered nosave memory: [mem 0x4ff4e000-0x4ff99fff]
> [    0.000000] PM: Registered nosave memory: [mem 0x4ff9a000-0x4fffefff]
> [    0.000000] PM: Registered nosave memory: [mem 0x50000000-0x57ffffff]
> [    0.000000] PM: Registered nosave memory: [mem 0x58000000-0x585fffff]
> [    0.000000] PM: Registered nosave memory: [mem 0x58600000-0x5c7fffff]
> [    0.000000] PM: Registered nosave memory: [mem 0x5c800000-0xefffffff]
> [    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
> [    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfe00ffff]
> [    0.000000] PM: Registered nosave memory: [mem 0xfe010000-0xfe010fff]
> [    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff]
> [    0.000000] e820: [mem 0x5c800000-0xefffffff] available for PCI devices
> [    0.000000] Booting paravirtualized kernel on bare hardware
> [    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
> [    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
> [    0.000000] percpu: Embedded 40 pages/cpu @        (ptrval) s125592 r8192 d30056 u524288
> [    0.000000] pcpu-alloc: s125592 r8192 d30056 u524288 alloc=1*2097152
> [    0.000000] pcpu-alloc: [0] 0 1 2 3 
> [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4064417
> [    0.000000] Policy zone: Normal
> [    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.15.0-rc5 root=/dev/mapper/vg0-root ro net.ifnames=0 psmouse.synaptics_intertouch=1
> [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
> [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
> [    0.000000] Memory: 16062560K/16516028K available (6748K kernel code, 1153K rwdata, 3028K rodata, 1488K init, 692K bss, 453468K reserved, 0K cma-reserved)
> [    0.000000] ftrace: allocating 29295 entries in 115 pages
> [    0.000000] Hierarchical RCU implementation.
> [    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
> [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
> [    0.000000] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16
> [    0.000000] Console: colour dummy device 80x25
> [    0.000000] console [tty0] enabled
> [    0.000000] ACPI: Core revision 20170831
> [    0.000000] ACPI: 10 ACPI AML tables successfully acquired and loaded
> [    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
> [    0.000000] hpet clockevent registered
> [    0.004000] APIC: Switch to symmetric I/O mode setup
> [    0.004000] DMAR: Host address width 39
> [    0.004000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
> [    0.004000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
> [    0.004000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
> [    0.004000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
> [    0.004000] DMAR: RMRR base: 0x0000004f49f000 end: 0x0000004f4befff
> [    0.004000] DMAR: RMRR base: 0x0000005a000000 end: 0x0000005c7fffff
> [    0.004000] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
> [    0.004000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
> [    0.004000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
> [    0.004000] DMAR-IR: Enabled IRQ remapping in x2apic mode
> [    0.004000] x2apic enabled
> [    0.004000] Switched APIC routing to cluster x2apic.
> [    0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [    0.028000] tsc: Detected 2900.000 MHz processor
> [    0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5808.00 BogoMIPS (lpj=11616000)
> [    0.028000] pid_max: default: 32768 minimum: 301
> [    0.028000] Security Framework initialized
> [    0.028000] Yama: becoming mindful.
> [    0.028000] AppArmor: AppArmor initialized
> [    0.028000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
> [    0.032411] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
> [    0.032461] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
> [    0.032501] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
> [    0.032691] CPU: Physical Processor ID: 0
> [    0.032693] CPU: Processor Core ID: 0
> [    0.032699] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
> [    0.032701] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
> [    0.032707] mce: CPU supports 8 MCE banks
> [    0.032717] CPU0: Thermal monitoring enabled (TM1)
> [    0.032732] process: using mwait in idle threads
> [    0.032735] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
> [    0.032737] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
> [    0.033536] Freeing SMP alternatives memory: 28K
> [    0.037709] TSC deadline timer enabled
> [    0.037717] smpboot: CPU0: Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz (family: 0x6, model: 0x8e, stepping: 0x9)
> [    0.037772] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
> [    0.037802] ... version:                4
> [    0.037803] ... bit width:              48
> [    0.037804] ... generic registers:      4
> [    0.037805] ... value mask:             0000ffffffffffff
> [    0.037807] ... max period:             00007fffffffffff
> [    0.037808] ... fixed-purpose events:   3
> [    0.037809] ... event mask:             000000070000000f
> [    0.037844] Hierarchical SRCU implementation.
> [    0.038264] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
> [    0.038275] smp: Bringing up secondary CPUs ...
> [    0.038352] x86: Booting SMP configuration:
> [    0.038353] .... node  #0, CPUs:      #1 #2 #3
> [    0.038829] smp: Brought up 1 node, 4 CPUs
> [    0.038829] smpboot: Max logical packages: 1
> [    0.038829] smpboot: Total of 4 processors activated (23232.00 BogoMIPS)
> [    0.040445] devtmpfs: initialized
> [    0.040445] x86/mm: Memory block size: 128MB
> [    0.041085] PM: Registering ACPI NVS region [mem 0x45022000-0x45022fff] (4096 bytes)
> [    0.041085] PM: Registering ACPI NVS region [mem 0x4ff2d000-0x4ff4cfff] (131072 bytes)
> [    0.041085] PM: Registering ACPI NVS region [mem 0x4ff4e000-0x4ff99fff] (311296 bytes)
> [    0.041085] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
> [    0.041085] futex hash table entries: 1024 (order: 4, 65536 bytes)
> [    0.041085] pinctrl core: initialized pinctrl subsystem
> [    0.041085] NET: Registered protocol family 16
> [    0.041085] audit: initializing netlink subsys (disabled)
> [    0.041085] audit: type=2000 audit(1514475578.040:1): state=initialized audit_enabled=0 res=1
> [    0.041085] cpuidle: using governor ladder
> [    0.041085] cpuidle: using governor menu
> [    0.041085] Simple Boot Flag at 0x47 set to 0x1
> [    0.041085] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
> [    0.041085] ACPI: bus type PCI registered
> [    0.041085] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [    0.041085] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
> [    0.041085] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
> [    0.041085] PCI: Using configuration type 1 for base access
> [    0.041085] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
> [    0.041085] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
> [    0.041085] ACPI: Added _OSI(Module Device)
> [    0.041085] ACPI: Added _OSI(Processor Device)
> [    0.041085] ACPI: Added _OSI(3.0 _SCP Extensions)
> [    0.041085] ACPI: Added _OSI(Processor Aggregator Device)
> [    0.041085] ACPI: EC: EC started
> [    0.041085] ACPI: EC: interrupt blocked
> [    0.044716] ACPI: \: Used as first EC
> [    0.044719] ACPI: \: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
> [    0.044721] ACPI: \: Used as boot ECDT EC to handle transactions
> [    0.045637] ACPI: Executed 25 blocks of module-level executable AML code
> [    0.053599] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
> [    0.063454] ACPI: Dynamic OEM Table Load:
> [    0.063468] ACPI: SSDT 0xFFFF8EC38E8FF800 0006F6 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
> [    0.063599] ACPI: Executed 1 blocks of module-level executable AML code
> [    0.063674] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
> [    0.064538] ACPI: Dynamic OEM Table Load:
> [    0.064546] ACPI: SSDT 0xFFFF8EC38E922C00 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
> [    0.064658] ACPI: Executed 1 blocks of module-level executable AML code
> [    0.064816] ACPI: Dynamic OEM Table Load:
> [    0.064822] ACPI: SSDT 0xFFFF8EC38E893180 0000BA (v02 PmRef  Cpu0Hwp  00003000 INTL 20160527)
> [    0.064912] ACPI: Executed 1 blocks of module-level executable AML code
> [    0.064996] ACPI: Dynamic OEM Table Load:
> [    0.065002] ACPI: SSDT 0xFFFF8EC38E8FF000 000628 (v02 PmRef  HwpLvt   00003000 INTL 20160527)
> [    0.065086] ACPI: Executed 1 blocks of module-level executable AML code
> [    0.065459] ACPI: Dynamic OEM Table Load:
> [    0.065469] ACPI: SSDT 0xFFFF8EC390D5A000 000D14 (v02 PmRef  ApIst    00003000 INTL 20160527)
> [    0.066058] ACPI: Executed 1 blocks of module-level executable AML code
> [    0.066208] ACPI: Dynamic OEM Table Load:
> [    0.066214] ACPI: SSDT 0xFFFF8EC38E8A1800 000317 (v02 PmRef  ApHwp    00003000 INTL 20160527)
> [    0.066354] ACPI: Executed 1 blocks of module-level executable AML code
> [    0.066514] ACPI: Dynamic OEM Table Load:
> [    0.066520] ACPI: SSDT 0xFFFF8EC38E8A1000 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
> [    0.066661] ACPI: Executed 1 blocks of module-level executable AML code
> [    0.067807] ACPI: Interpreter enabled
> [    0.067853] ACPI: (supports S0 S3 S4 S5)
> [    0.067854] ACPI: Using IOAPIC for interrupt routing
> [    0.067888] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [    0.068420] ACPI: Enabled 7 GPEs in block 00 to 7F
> [    0.071611] ACPI: Power Resource [PUBS] (on)
> [    0.094003] ACPI: Power Resource [WRST] (on)
> [    0.094126] ACPI: Power Resource [WRST] (on)
> [    0.106511] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
> [    0.106518] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
> [    0.106629] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER PCIeCapability]
> [    0.106631] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
> [    0.106633] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
> [    0.106635] acpi PNP0A08:00: _OSC: platform willing to grant []
> [    0.106637] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
> [    0.106637] PCI host bridge to bus 0000:00
> [    0.106637] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
> [    0.106637] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
> [    0.106637] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
> [    0.106637] pci_bus 0000:00: root bus resource [mem 0x5c800000-0xefffffff window]
> [    0.106637] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
> [    0.106637] pci_bus 0000:00: root bus resource [bus 00-7e]
> [    0.106637] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
> [    0.106637] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
> [    0.106637] pci 0000:00:02.0: reg 0x10: [mem 0xeb000000-0xebffffff 64bit]
> [    0.106637] pci 0000:00:02.0: reg 0x18: [mem 0x60000000-0x6fffffff 64bit pref]
> [    0.106637] pci 0000:00:02.0: reg 0x20: [io  0xe000-0xe03f]
> [    0.106637] pci 0000:00:02.0: BAR 2: assigned to efifb
> [    0.106637] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
> [    0.106637] pci 0000:00:08.0: reg 0x10: [mem 0xec348000-0xec348fff 64bit]
> [    0.106864] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
> [    0.106884] pci 0000:00:14.0: reg 0x10: [mem 0xec320000-0xec32ffff 64bit]
> [    0.106951] pci 0000:00:14.0: PME# supported from D3hot D3cold
> [    0.107713] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
> [    0.107732] pci 0000:00:14.2: reg 0x10: [mem 0xec349000-0xec349fff 64bit]
> [    0.108468] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
> [    0.108491] pci 0000:00:16.0: reg 0x10: [mem 0xec34a000-0xec34afff 64bit]
> [    0.108547] pci 0000:00:16.0: PME# supported from D3hot
> [    0.109296] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
> [    0.109368] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [    0.110103] pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400
> [    0.110174] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> [    0.110914] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
> [    0.110983] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
> [    0.111723] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
> [    0.111790] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> [    0.112547] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
> [    0.113365] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
> [    0.113378] pci 0000:00:1f.2: reg 0x10: [mem 0xec344000-0xec347fff]
> [    0.114134] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
> [    0.114161] pci 0000:00:1f.3: reg 0x10: [mem 0xec340000-0xec343fff 64bit]
> [    0.114192] pci 0000:00:1f.3: reg 0x20: [mem 0xec330000-0xec33ffff 64bit]
> [    0.114239] pci 0000:00:1f.3: PME# supported from D3hot D3cold
> [    0.114972] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
> [    0.115026] pci 0000:00:1f.4: reg 0x10: [mem 0xec34b000-0xec34b0ff 64bit]
> [    0.115077] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
> [    0.115847] pci 0000:00:1f.6: [8086:15d7] type 00 class 0x020000
> [    0.115869] pci 0000:00:1f.6: reg 0x10: [mem 0xec300000-0xec31ffff]
> [    0.115958] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
> [    0.117003] pci 0000:02:00.0: [10ec:525a] type 00 class 0xff0000
> [    0.117033] pci 0000:02:00.0: reg 0x14: [mem 0xec200000-0xec200fff]
> [    0.117130] pci 0000:02:00.0: supports D1 D2
> [    0.117130] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
> [    0.128306] pci 0000:00:1c.0: PCI bridge to [bus 02]
> [    0.128312] pci 0000:00:1c.0:   bridge window [mem 0xec200000-0xec2fffff]
> [    0.128647] pci 0000:04:00.0: [8086:24fd] type 00 class 0x028000
> [    0.128695] pci 0000:04:00.0: reg 0x10: [mem 0xec100000-0xec101fff 64bit]
> [    0.128950] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
> [    0.144304] pci 0000:00:1c.2: PCI bridge to [bus 04]
> [    0.144309] pci 0000:00:1c.2:   bridge window [mem 0xec100000-0xec1fffff]
> [    0.144583] pci 0000:05:00.0: [144d:a804] type 00 class 0x010802
> [    0.144609] pci 0000:05:00.0: reg 0x10: [mem 0xec000000-0xec003fff 64bit]
> [    0.160239] pci 0000:00:1c.4: PCI bridge to [bus 05]
> [    0.160243] pci 0000:00:1c.4:   bridge window [mem 0xec000000-0xec0fffff]
> [    0.160293] pci 0000:00:1d.0: PCI bridge to [bus 06-70]
> [    0.160300] pci 0000:00:1d.0:   bridge window [mem 0xbc000000-0xea0fffff]
> [    0.160304] pci 0000:00:1d.0:   bridge window [mem 0x70000000-0xb9ffffff 64bit pref]
> [    0.161823] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
> [    0.161888] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
> [    0.161950] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
> [    0.162011] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
> [    0.162072] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
> [    0.162132] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
> [    0.162193] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
> [    0.162253] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
> [    0.164000] ACPI: EC: interrupt unblocked
> [    0.164000] ACPI: EC: event unblocked
> [    0.164000] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
> [    0.164000] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
> [    0.164013] pci 0000:00:02.0: vgaarb: setting as boot VGA device
> [    0.164013] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
> [    0.164013] pci 0000:00:02.0: vgaarb: bridge control possible
> [    0.164013] vgaarb: loaded
> [    0.164043] EDAC MC: Ver: 3.0.0
> [    0.164868] Registered efivars operations
> [    0.192013] PCI: Using ACPI for IRQ routing
> [    0.195301] PCI: pci_cache_line_size set to 64 bytes
> [    0.196783] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
> [    0.196784] e820: reserve RAM buffer [mem 0x0008c000-0x0008ffff]
> [    0.196785] e820: reserve RAM buffer [mem 0x45022000-0x47ffffff]
> [    0.196786] e820: reserve RAM buffer [mem 0x4e966000-0x4fffffff]
> [    0.196787] e820: reserve RAM buffer [mem 0x4a1800000-0x4a3ffffff]
> [    0.200063] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
> [    0.200068] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
> [    0.202121] clocksource: Switched to clocksource hpet
> [    0.207898] VFS: Disk quotas dquot_6.6.0
> [    0.207914] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [    0.207998] AppArmor: AppArmor Filesystem Enabled
> [    0.208041] pnp: PnP ACPI init
> [    0.208190] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
> [    0.208192] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
> [    0.208194] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
> [    0.208196] system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved
> [    0.208199] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
> [    0.208200] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
> [    0.208202] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
> [    0.208207] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.208465] system 00:01: [io  0xff00-0xfffe] has been reserved
> [    0.208468] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.208806] system 00:02: [io  0x0680-0x069f] has been reserved
> [    0.208810] system 00:02: [io  0xffff] has been reserved
> [    0.208812] system 00:02: [io  0xffff] has been reserved
> [    0.208813] system 00:02: [io  0xffff] has been reserved
> [    0.208815] system 00:02: [io  0x1800-0x18fe] has been reserved
> [    0.208817] system 00:02: [io  0x164e-0x164f] has been reserved
> [    0.208821] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.208908] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
> [    0.208937] system 00:04: [io  0x1854-0x1857] has been reserved
> [    0.208941] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
> [    0.208957] pnp 00:05: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
> [    0.208971] pnp 00:06: Plug and Play ACPI device, IDs LEN0072 PNP0f13 (active)
> [    0.209058] system 00:07: [io  0x1800-0x189f] could not be reserved
> [    0.209061] system 00:07: [io  0x0800-0x087f] has been reserved
> [    0.209063] system 00:07: [io  0x0880-0x08ff] has been reserved
> [    0.209064] system 00:07: [io  0x0900-0x097f] has been reserved
> [    0.209066] system 00:07: [io  0x0980-0x09ff] has been reserved
> [    0.209068] system 00:07: [io  0x0a00-0x0a7f] has been reserved
> [    0.209070] system 00:07: [io  0x0a80-0x0aff] has been reserved
> [    0.209071] system 00:07: [io  0x0b00-0x0b7f] has been reserved
> [    0.209073] system 00:07: [io  0x0b80-0x0bff] has been reserved
> [    0.209075] system 00:07: [io  0x15e0-0x15ef] has been reserved
> [    0.209077] system 00:07: [io  0x1600-0x167f] could not be reserved
> [    0.209079] system 00:07: [io  0x1640-0x165f] could not be reserved
> [    0.209081] system 00:07: [mem 0xf0000000-0xf7ffffff] has been reserved
> [    0.209083] system 00:07: [mem 0xfed10000-0xfed13fff] has been reserved
> [    0.209085] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
> [    0.209087] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
> [    0.209089] system 00:07: [mem 0xfeb00000-0xfebfffff] has been reserved
> [    0.209091] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
> [    0.209093] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
> [    0.209096] system 00:07: [mem 0xeffe0000-0xefffffff] has been reserved
> [    0.209099] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.210173] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
> [    0.210175] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
> [    0.210177] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
> [    0.210180] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.210648] system 00:09: [mem 0xfed10000-0xfed17fff] could not be reserved
> [    0.210650] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
> [    0.210652] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
> [    0.210654] system 00:09: [mem 0xf0000000-0xf7ffffff] has been reserved
> [    0.210656] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
> [    0.210658] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
> [    0.210660] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
> [    0.210662] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
> [    0.210664] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
> [    0.210666] system 00:09: [mem 0xeffe0000-0xefffffff] has been reserved
> [    0.210669] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.210945] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
> [    0.210947] system 00:0a: [mem 0x000c0000-0x000c3fff] could not be reserved
> [    0.210949] system 00:0a: [mem 0x000c8000-0x000cbfff] could not be reserved
> [    0.210951] system 00:0a: [mem 0x000d0000-0x000d3fff] could not be reserved
> [    0.210953] system 00:0a: [mem 0x000d8000-0x000dbfff] could not be reserved
> [    0.210955] system 00:0a: [mem 0x000e0000-0x000e3fff] could not be reserved
> [    0.210957] system 00:0a: [mem 0x000e8000-0x000ebfff] could not be reserved
> [    0.210958] system 00:0a: [mem 0x000f0000-0x000fffff] could not be reserved
> [    0.210960] system 00:0a: [mem 0x00100000-0x5c7fffff] could not be reserved
> [    0.210963] system 00:0a: [mem 0xfec00000-0xfed3ffff] could not be reserved
> [    0.210965] system 00:0a: [mem 0xfed4c000-0xffffffff] could not be reserved
> [    0.210968] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
> [    0.211072] pnp: PnP ACPI: found 11 devices
> [    0.219515] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
> [    0.219561] pci 0000:00:1d.0: bridge window [io  0x1000-0x0fff] to [bus 06-70] add_size 1000
> [    0.219565] pci 0000:00:1d.0: BAR 13: assigned [io  0x2000-0x2fff]
> [    0.219568] pci 0000:00:1c.0: PCI bridge to [bus 02]
> [    0.219581] pci 0000:00:1c.0:   bridge window [mem 0xec200000-0xec2fffff]
> [    0.219590] pci 0000:00:1c.2: PCI bridge to [bus 04]
> [    0.219596] pci 0000:00:1c.2:   bridge window [mem 0xec100000-0xec1fffff]
> [    0.219603] pci 0000:00:1c.4: PCI bridge to [bus 05]
> [    0.219615] pci 0000:00:1c.4:   bridge window [mem 0xec000000-0xec0fffff]
> [    0.219621] pci 0000:00:1d.0: PCI bridge to [bus 06-70]
> [    0.219628] pci 0000:00:1d.0:   bridge window [io  0x2000-0x2fff]
> [    0.219632] pci 0000:00:1d.0:   bridge window [mem 0xbc000000-0xea0fffff]
> [    0.219635] pci 0000:00:1d.0:   bridge window [mem 0x70000000-0xb9ffffff 64bit pref]
> [    0.219643] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
> [    0.219644] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
> [    0.219645] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
> [    0.219646] pci_bus 0000:00: resource 7 [mem 0x5c800000-0xefffffff window]
> [    0.219647] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
> [    0.219648] pci_bus 0000:02: resource 1 [mem 0xec200000-0xec2fffff]
> [    0.219648] pci_bus 0000:04: resource 1 [mem 0xec100000-0xec1fffff]
> [    0.219649] pci_bus 0000:05: resource 1 [mem 0xec000000-0xec0fffff]
> [    0.219650] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
> [    0.219651] pci_bus 0000:06: resource 1 [mem 0xbc000000-0xea0fffff]
> [    0.219652] pci_bus 0000:06: resource 2 [mem 0x70000000-0xb9ffffff 64bit pref]
> [    0.219777] NET: Registered protocol family 2
> [    0.219900] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> [    0.220085] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [    0.220222] TCP: Hash tables configured (established 131072 bind 65536)
> [    0.220250] UDP hash table entries: 8192 (order: 6, 262144 bytes)
> [    0.220293] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
> [    0.220358] NET: Registered protocol family 1
> [    0.220373] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
> [    0.221407] PCI: CLS 0 bytes, default 64
> [    0.221434] Unpacking initramfs...
> [    0.605658] Freeing initrd memory: 25352K
> [    0.605729] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [    0.605734] software IO TLB [mem 0x49c1b000-0x4dc1b000] (64MB) mapped at [000000003516238a-0000000042f084bd]
> [    0.605763] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc05e54fc, max_idle_ns: 440795291716 ns
> [    0.606405] Initialise system trusted keyrings
> [    0.606519] workingset: timestamp_bits=40 max_order=22 bucket_order=0
> [    0.606623] zbud: loaded
> [    0.849648] Key type asymmetric registered
> [    0.849651] Asymmetric key parser 'x509' registered
> [    0.849664] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
> [    0.849730] io scheduler noop registered
> [    0.849732] io scheduler deadline registered
> [    0.849754] io scheduler cfq registered (default)
> [    0.849756] io scheduler mq-deadline registered
> [    0.850543] efifb: probing for efifb
> [    0.850557] efifb: framebuffer at 0x60000000, using 8128k, total 8128k
> [    0.850559] efifb: mode is 1920x1080x32, linelength=7680, pages=1
> [    0.850560] efifb: scrolling: redraw
> [    0.850562] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
> [    0.854050] Console: switching to colour frame buffer device 240x67
> [    0.857446] fb0: EFI VGA frame buffer device
> [    0.857465] intel_idle: MWAIT substates: 0x11142120
> [    0.857466] intel_idle: v0.4.1 model 0x8E
> [    0.857728] intel_idle: lapic_timer_reliable_states 0xffffffff
> [    0.858493] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [    0.859100] Linux agpgart interface v0.103
> [    0.865059] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x0, rev-id 78)
> [    0.890357] AMD IOMMUv2 driver by Joerg Roedel <jroedel@xxxxxxx>
> [    0.890375] AMD IOMMUv2 functionality not available on this system
> [    0.890874] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
> [    0.893079] serio: i8042 KBD port at 0x60,0x64 irq 1
> [    0.893097] serio: i8042 AUX port at 0x60,0x64 irq 12
> [    0.893425] mousedev: PS/2 mouse device common for all mice
> [    0.893499] rtc_cmos 00:03: RTC can wake from S4
> [    0.894074] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
> [    0.894184] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
> [    0.894246] intel_pstate: Intel P-state driver initializing
> [    0.894829] intel_pstate: HWP enabled
> [    0.894969] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
> [    0.895266] ledtrig-cpu: registered to indicate activity on CPUs
> [    0.895557] NET: Registered protocol family 10
> [    0.895856] Segment Routing with IPv6
> [    0.895879] mip6: Mobile IPv6
> [    0.895890] NET: Registered protocol family 17
> [    0.895906] mpls_gso: MPLS GSO support
> [    0.896293] microcode: sig=0x806e9, pf=0x80, revision=0x70
> [    0.896515] microcode: Microcode Update Driver: v2.2.
> [    0.896522] sched_clock: Marking stable (896503403, 0)->(876333434, 20169969)
> [    0.897010] registered taskstats version 1
> [    0.897023] Loading compiled-in X.509 certificates
> [    0.897050] zswap: loaded using pool lzo/zbud
> [    0.897197] AppArmor: AppArmor sha1 policy hashing enabled
> [    0.959806] rtc_cmos 00:03: setting system clock to 2017-12-28 15:39:39 UTC (1514475579)
> [    0.962277] Freeing unused kernel memory: 1488K
> [    0.962302] Write protecting the kernel read-only data: 12288k
> [    0.962870] Freeing unused kernel memory: 1420K
> [    0.965473] Freeing unused kernel memory: 1068K
> [    0.972105] x86/mm: Checked W+X mappings: passed, no W+X pages found.
> [    1.051653] hidraw: raw HID events driver (C) Jiri Kosina
> [    1.065743] ACPI: bus type USB registered
> [    1.065781] usbcore: registered new interface driver usbfs
> [    1.065809] usbcore: registered new interface driver hub
> [    1.065848] usbcore: registered new device driver usb
> [    1.068201] nvme nvme0: pci function 0000:05:00.0
> [    1.070136] rtsx_pci 0000:02:00.0: enabling device (0000 -> 0002)
> [    1.071778] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [    1.071971] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
> [    1.074158] thermal LNXTHERM:00: registered as thermal_zone0
> [    1.074159] ACPI: Thermal Zone [THM0] (60 C)
> [    1.076417] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
> [    1.078320] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
> [    1.079065] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
> [    1.079302] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [    1.080032] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    1.080496] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
> [    1.080496] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
> [    1.080499] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
> [    1.080499] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
> [    1.080751] CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
> [    1.080752] CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
> [    1.085367] usb usb1: Product: xHCI Host Controller
> [    1.086209] usb usb1: Manufacturer: Linux 4.15.0-rc5 xhci-hcd
> [    1.087051] usb usb1: SerialNumber: 0000:00:14.0
> [    1.088105] hub 1-0:1.0: USB hub found
> [    1.088994] hub 1-0:1.0: 12 ports detected
> [    1.090699] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [    1.091531] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
> [    1.092437] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
> [    1.093354] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    1.094082] usb usb2: Product: xHCI Host Controller
> [    1.094781] usb usb2: Manufacturer: Linux 4.15.0-rc5 xhci-hcd
> [    1.095413] usb usb2: SerialNumber: 0000:00:14.0
> [    1.096182] hub 2-0:1.0: USB hub found
> [    1.096990] hub 2-0:1.0: 6 ports detected
> [    1.097906] pps_core: LinuxPPS API ver. 1 registered
> [    1.097915] usb: port power management may be unreliable
> [    1.099155] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
> [    1.099428] CPU0: Core temperature/speed normal
> [    1.099429] CPU0: Package temperature/speed normal
> [    1.099431] CPU2: Core temperature/speed normal
> [    1.099432] CPU1: Package temperature/speed normal
> [    1.099432] CPU2: Package temperature/speed normal
> [    1.099794] CPU3: Package temperature/speed normal
> [    1.104789] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
> [    1.105661] i801_smbus 0000:00:1f.4: SPD Write Disable is set
> [    1.105857] PTP clock support registered
> [    1.107186] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
> [    1.107221] AVX2 version of gcm_enc/dec engaged.
> [    1.107221] AES CTR mode by8 optimization enabled
> [    1.109645] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
> [    1.110488] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
> [    1.111300] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
> [    1.118149] alg: No test for pcbc(aes) (pcbc-aes-aesni)
> [    1.243984] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
> [    1.307258]  nvme0n1: p1 p2 p3 p4 p5 p6
> [    1.329920] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) c8:5b:76:d1:68:28
> [    1.331791] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
> [    1.333712] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: 1000FF-0FF
> [    1.392326] device-mapper: uevent: version 1.0.3
> [    1.393304] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@xxxxxxxxxx
> [    1.424209] usb 1-6: new high-speed USB device number 2 using xhci_hcd
> [    1.575453] usb 1-6: config 1 has an invalid interface number: 12 but max is 1
> [    1.575456] usb 1-6: config 1 has an invalid interface number: 13 but max is 1
> [    1.575458] usb 1-6: config 1 has an invalid interface number: 13 but max is 1
> [    1.575460] usb 1-6: config 1 has no interface number 0
> [    1.575462] usb 1-6: config 1 has no interface number 1
> [    1.576841] usb 1-6: New USB device found, idVendor=1199, idProduct=9079
> [    1.576844] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [    1.576847] usb 1-6: Product: Sierra Wireless EM7455 Qualcomm Snapdragon X7 LTE-A
> [    1.576849] usb 1-6: Manufacturer: Sierra Wireless, Incorporated
> [    1.576851] usb 1-6: SerialNumber: LF70662577041020
> [    1.628443] clocksource: Switched to clocksource tsc
> [    1.704190] usb 1-7: new full-speed USB device number 3 using xhci_hcd
> [    1.853723] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b
> [    1.853727] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [    1.882340] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4760]
> [    1.914329] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1094..]
> [    1.914333] psmouse serio1: synaptics: Trying to set up SMBus access
> [    1.980206] usb 1-8: new high-speed USB device number 4 using xhci_hcd
> [    2.138478] usb 1-8: New USB device found, idVendor=04f2, idProduct=b5ce
> [    2.138483] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [    2.138486] usb 1-8: Product: Integrated Camera
> [    2.138488] usb 1-8: Manufacturer: Chicony Electronics Co.,Ltd.
> [    2.268208] usb 1-9: new full-speed USB device number 5 using xhci_hcd
> [    2.418304] usb 1-9: New USB device found, idVendor=138a, idProduct=0097
> [    2.418308] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=1
> [    2.418310] usb 1-9: SerialNumber: 2ff380531485
> [    5.720051] random: crng init done
> [   10.258276] NET: Registered protocol family 38
> [   10.557342] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
> [   10.659992] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
> [   10.674445] ip_tables: (C) 2000-2006 Netfilter Core Team
> [   10.745553] systemd[1]: systemd 236 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
> [   10.764117] systemd[1]: Detected architecture x86-64.
> [   10.768542] systemd[1]: Set hostname to <marax>.
> [   10.784564] systemd-fstab-generator[281]: x-systemd.device-timeout ignored for fate.yath.de:/data
> [   10.800919] systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
> [   10.801659] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
> [   10.835096] systemd[1]: System is tainted: local-hwclock
> [   10.836167] systemd[1]: Created slice System Slice.
> [   10.838237] systemd[1]: Mounting Huge Pages File System...
> [   10.840076] systemd[1]: Listening on Journal Socket.
> [   10.841908] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
> [   10.853405] lp: driver loaded but no devices found
> [   10.855538] ppdev: user-space parallel port driver
> [   10.855567] RPC: Registered named UNIX socket transport module.
> [   10.855567] RPC: Registered udp transport module.
> [   10.855567] RPC: Registered tcp transport module.
> [   10.855568] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [   10.865314] SCSI subsystem initialized
> [   10.867367] Loading iSCSI transport class v2.0-870.
> [   10.870385] iscsi: registered transport (tcp)
> [   10.880379] iscsi: registered transport (iser)
> [   10.882043] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro
> [   10.942543] systemd-journald[321]: Received request to flush runtime journal from PID 1
> [   10.969080] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
> [   10.971294] ACPI: Sleep Button [SLPB]
> [   10.972679] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
> [   10.973681] ACPI: Lid Switch [LID]
> [   10.975083] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
> [   10.976861] ACPI: Power Button [PWRF]
> [   11.017015] ACPI: AC Adapter [AC] (on-line)
> [   11.018032] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
> [   11.018225] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
> [   11.020028] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [   11.021026] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
> [   11.024592] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
> [   11.030187] Non-volatile memory driver v1.3
> [   11.051931] thinkpad_acpi: ThinkPad ACPI Extras v0.25
> [   11.053153] thinkpad_acpi: http://ibm-acpi.sf.net/
> [   11.054365] thinkpad_acpi: ThinkPad BIOS N1MET39W (1.24 ), EC unknown
> [   11.055351] thinkpad_acpi: Lenovo ThinkPad X1 Carbon 5th, model 20HRCTO1WW
> [   11.057752] thinkpad_acpi: radio switch found; radios are enabled
> [   11.058987] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
> [   11.059732] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
> [   11.060048] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
> [   11.062157] iTCO_vendor_support: vendor-support=0
> [   11.063985] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
> [   11.065462] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
> [   11.068119] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [   11.074594] cfg80211: Loading compiled-in X.509 certificates for regulatory database
> [   11.078602] rmi4_smbus 0-002c: registering SMbus-connected sensor
> [   11.105570] Bluetooth: Core ver 2.22
> [   11.106692] NET: Registered protocol family 31
> [   11.106693] Bluetooth: HCI device and connection manager initialized
> [   11.106696] Bluetooth: HCI socket layer initialized
> [   11.106698] Bluetooth: L2CAP socket layer initialized
> [   11.106702] Bluetooth: SCO socket layer initialized
> [   11.114162] usbcore: registered new interface driver btusb
> [   11.115104] Bluetooth: hci0: Firmware revision 0.1 build 103 week 50 2016
> [   11.118426] [drm] Memory usable by graphics device = 4096M
> [   11.119696] checking generic (60000000 7f0000) vs hw (60000000 10000000)
> [   11.119697] fb: switching to inteldrmfb from EFI VGA
> [   11.122684] Console: switching to colour dummy device 80x25
> [   11.122759] [drm] Replacing VGA console driver
> [   11.126979] EFI Variables Facility v0.08 2004-May-17
> [   11.131368] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [   11.131371] [drm] Driver supports precise vblank timestamp query.
> [   11.133391] usbcore: registered new interface driver usbserial_generic
> [   11.133584] usbserial: USB Serial support registered for generic
> [   11.134338] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [   11.141636] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
> [   11.143877] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
> [   11.143920] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
> [   11.143924] cfg80211: failed to load regulatory.db
> [   11.145141] usbcore: registered new interface driver cdc_ncm
> [   11.145841] usbcore: registered new interface driver cdc_wdm
> [   11.149474] Intel(R) Wireless WiFi driver for Linux
> [   11.149479] Copyright(c) 2003- 2015 Intel Corporation
> [   11.152704] iwlwifi 0000:04:00.0: enabling device (0000 -> 0002)
> [   11.154453] input: PC Speaker as /devices/platform/pcspkr/input/input7
> [   11.156586] usbcore: registered new interface driver qcserial
> [   11.156597] usbserial: USB Serial support registered for Qualcomm USB modem
> [   11.158979] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
> [   11.161975] Error: Driver 'pcspkr' is already registered, aborting...
> [   11.165511] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8265-34.ucode failed with error -2
> [   11.166044] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8265-33.ucode failed with error -2
> [   11.166058] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8265-32.ucode failed with error -2
> [   11.170427] ACPI: Battery Slot [BAT0] (battery present)
> [   11.172810] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
> [   11.172974] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
> [   11.174304] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
> [   11.174803] cdc_mbim 1-6:1.12: cdc-wdm0: USB WDM device
> [   11.174948] cdc_mbim 1-6:1.12 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-6, CDC MBIM, 0e:36:04:4f:d4:3a
> [   11.174979] usbcore: registered new interface driver cdc_mbim
> [   11.175420] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
> [   11.176383] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
> [   11.180119] iwlwifi 0000:04:00.0: loaded firmware version 31.532993.0 op_mode iwlmvm
> [   11.180529] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null)
> [   11.185358] fbcon: inteldrmfb (fb0) is primary device
> [   11.202241] media: Linux media interface: v0.10
> [   11.202452] pstore: using zlib compression
> [   11.202475] pstore: Registered efi as persistent store backend
> [   11.209681] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
> [   11.209682] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
> [   11.209682] RAPL PMU: hw unit of domain package 2^-14 Joules
> [   11.209682] RAPL PMU: hw unit of domain dram 2^-14 Joules
> [   11.209683] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
> [   11.209683] RAPL PMU: hw unit of domain psys 2^-14 Joules
> [   11.218941] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
> [   11.219294] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
> [   11.219536] Linux video capture interface: v2.00
> [   11.223299] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
> [   11.223715] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM3289-002, fw id: 2492434
> [   11.250788] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b5ce)
> [   11.255712] intel_rapl: Found RAPL domain package
> [   11.255713] intel_rapl: Found RAPL domain core
> [   11.255713] intel_rapl: Found RAPL domain uncore
> [   11.255714] intel_rapl: Found RAPL domain dram
> [   11.258215] uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not initialized!
> [   11.258217] uvcvideo 1-8:1.0: Entity type for entity Extension 3 was not initialized!
> [   11.258218] uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not initialized!
> [   11.258219] uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized!
> [   11.261401] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input11
> [   11.261464] usbcore: registered new interface driver uvcvideo
> [   11.261464] USB Video Class driver (1.1.1)
> [   11.285963] iwlwifi 0000:04:00.0: base HW address: 00:28:f8:26:30:8b
> [   11.325732] input: Synaptics TM3289-002 as /devices/rmi4-00/input/input9
> [   11.363339] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
> [   11.363529] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
> [   11.363544] thermal thermal_zone3: failed to read out thermal zone (-61)
> [   12.346635] Console: switching to colour frame buffer device 240x67
> [   12.370052] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> [   12.374742] psmouse serio2: trackpoint: failed to get extended button data, assuming 3 buttons
> [   12.407324] snd_hda_codec_conexant hdaudioC0D0: CX8200: BIOS auto-probing.
> [   12.407828] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX8200: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
> [   12.407829] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [   12.407830] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
> [   12.407830] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
> [   12.407830] snd_hda_codec_conexant hdaudioC0D0:    inputs:
> [   12.407831] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1a
> [   12.407832] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x19
> [   12.408768] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
> [   12.419279] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
> [   12.420446] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
> [   12.420490] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
> [   12.420530] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
> [   12.420567] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
> [   12.420602] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
> [   12.420637] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
> [   12.420670] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
> [   12.456201] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
> [   12.726062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [   12.796326] [drm] RC6 on
> [   12.832585] Process accounting resumed
> [   12.974424] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [   12.975093] Bluetooth: BNEP filters: protocol multicast
> [   12.975809] Bluetooth: BNEP socket layer initialized
> [   14.571121] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x04, buttons: 3/3
> [   14.619910] input: TPPS/2 IBM TrackPoint as /devices/rmi4-00/rmi4-00.fn03/serio2/input/input12
> [   16.196183] wlan0: authenticate with f0:9f:c2:ab:9a:eb
> [   16.205967] wlan0: send auth to f0:9f:c2:ab:9a:eb (try 1/3)
> [   16.212251] wlan0: authenticated
> [   16.216017] wlan0: associate with f0:9f:c2:ab:9a:eb (try 1/3)
> [   16.220152] wlan0: RX AssocResp from f0:9f:c2:ab:9a:eb (capab=0x411 status=0 aid=3)
> [   16.222223] wlan0: associated
> [   16.245320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> [   18.560839] Bluetooth: RFCOMM TTY layer initialized
> [   18.560844] Bluetooth: RFCOMM socket layer initialized
> [   18.560847] Bluetooth: RFCOMM ver 1.11
> [   95.564115] psmouse serio2: Failed to enable mouse on synaptics-rmi4-pt/serio1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux