On Mon, Jun 26, 2017 at 10:27 PM, Wang Yafei <wangyafei@xxxxxxxxxx> wrote:
> On Mon, Jun 26, 2017 at 09:16:40AM -0500, Rob Herring wrote:
>> On Mon, Jun 26, 2017 at 8:22 AM, Wang Yafei <wangyafei@xxxxxxxxxx> wrote:
>> > Hi Rob,
>> >
>> > Thank you for the review.
>> >
>> > On Fri, Jun 23, 2017 at 03:37:06PM -0500, Rob Herring wrote:
>> >> On Mon, Jun 19, 2017 at 06:40:32PM +0800, Wang Yafei wrote:
>> >> > Signed-off-by: Wang Yafei <wangyafei@xxxxxxxxxx>
>> >> > ---
>> >> > .../bindings/input/touchscreen/goodix-gtx5.txt | 75 ++++++++++++++++++++++
>> >> > 1 file changed, 75 insertions(+)
>> >> > create mode 100755 Documentation/devicetree/bindings/input/touchscreen/goodix-gtx5.txt
>>
>> [...]
>> >> > + compatible = "goodix,gtx5";
>> >> > + reg = <0x14>;
>> >> > + interrupt-parent = <&msm_gpio>;
>> >> > + interrupts = <13 0x2800>;
>> >> > + vtouch-supply = <&pm8916_l15>;
>> >> > + reset-gpios = <&msm_gpio 12 0x0>;
>> >> > + irq-gpios = <&msm_gpio 13 0x2800>;
>> >> > + irq-flags = <1>; /* 1:trigger rising, 2:trigger falling;*/
>> >> > + touchscreen-max-id = <10>;
>> >> > + touchscreen-size-x = <400>;
>> >> > + touchscreen-size-y = <400>;
>> >> > + touchscreen-max-w = <400>;
>> >> > + touchscreen-max-pressure = <255>;
>> >> > + touchscreen-swapped-x-y;
>> >> > + touchscreen-key-map = <172 158>; /*KEY_HOMEPAGE, KEY_BACK*/
>> >> > + sensor0 {
>> >>
>> >> How many sensors can there be? That needs to be documented.
>> >>
>> >> Why do you need a sub-node?
>> >
>> > sensor is an internal call, we use senesorX to represent the touchpanel
>> > is produced by which factory. A panel factory will have it corresponding
>> > config data to get the best touch results. It will delete the sub-node
>> > and change to the following format:
>> > panel0,normal-cfg = [...] /* panelX,cfg : X is no more than 10*/
>>
>> panel0 is not a vendor and normal doesn't tell us anything. How about
>> just "goodix,panel-cfg-X"?
>
> Can I use "goodix,normal-cfg-X" rather than "goodix,panel-cfg-X"? The
> string "normal-cfg" is meaningful to driver.
Okay.
Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
