Signed-off-by: Wang Yafei <wangyafei@xxxxxxxxxx>
---
.../bindings/input/touchscreen/goodix-gtx5.txt | 75 ++++++++++++++++++++++
1 file changed, 75 insertions(+)
create mode 100755 Documentation/devicetree/bindings/input/touchscreen/goodix-gtx5.txt
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix-gtx5.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix-gtx5.txt
new file mode 100755
index 0000000..116c3ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix-gtx5.txt
@@ -0,0 +1,75 @@
+Device tree bindings for Goodix GTx5 series touchscreen controller
+
+Required properties:
+
+- compatible : should be "goodix,gtx5" or "goodix,gsx"
+
+- reg : I2C address of the chip. Should be 0x5d or 0x14
+- interrupt-parent : Inerrupt controller to which the chip is connected
+- interrupts : Interrrupt to which the chip is connected
+- touchscreen-size-x : horizontal resolution of touchscreen
+ (in pixels)
+- touchscreen-size-y : vertical resolution of touchscreen
+ (in pixels)
+- touchscreen-max-id : panel supported max touch number.
+- touchscreen-max-w : panel max width value.
+
+
+Optional properties:
+- reset-gpios : reset gpio.
+- irq-gpios : interrupt gpio.
+- irq-flags : irq trigger type config, value should be:
+ 1 - rising edge,
+ 2 - falling edge,
+ 4 - high level,
+ 5 - low level.
+- touchscreen-swapped-x-y: swap x/y axis coordinates.
+- touchscreen-key-map: keycode value map /*KEY_HOMEPAGE, KEY_BACK*/
+- power-on-delay-us: delay after power on.
+- power-off-delay-us: delay after power off.
+- normal-cfg: touch device normal config data.
+- vtouch-supply : power supply for the touch device.
+Example:
+i2c@00000000 {
+ /* ... */
+
+ goodix-ts-i2c@14 {
+ compatible = "goodix,gtx5";
+ reg = <0x14>;
+ interrupt-parent = <&msm_gpio>;
+ interrupts = <13 0x2800>;
+ vtouch-supply = <&pm8916_l15>;
+ reset-gpios = <&msm_gpio 12 0x0>;
+ irq-gpios = <&msm_gpio 13 0x2800>;
+ irq-flags = <1>; /* 1:trigger rising, 2:trigger falling;*/
+ touchscreen-max-id = <10>;
+ touchscreen-size-x = <400>;
+ touchscreen-size-y = <400>;
+ touchscreen-max-w = <400>;
+ touchscreen-max-pressure = <255>;
+ touchscreen-swapped-x-y;
+ touchscreen-key-map = <172 158>; /*KEY_HOMEPAGE, KEY_BACK*/
+ sensor0 {
+ normal-cfg = [
+ 02 00 00 09 09 01 07 02 00 00 00 00 01 00 3C 00 07 07
+ 00 00 00 00 00 00 40 01 40 01 C8 00 96 00 F4 01 F4 01
+ F4 01 20 01 11 0A 0A 03 14 14 14 14 0A 0C 01 01 11 11
+ 11 00 14 14 14 14 14 14 14 14 14 00 00 0F 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 11 09 10 00 31 32 33 34
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 CA 64 00
+ 00 00 00 00 00 00 09 00 13 00 00 00 00 00 00 00 00 00
+ 50 B0 19 00 19 00 05 00 00 00 00 0A 05 00 00 00 00 00
+ 01 00 FF 00 0B 06 0D 02 FF 04 05 03 07 01 08 0A 0E 11
+ 0F 10 09 13 0C 16 17 14 18 12 19 15 1D 1E 1C 1F 1B 20
+ 1A 2A 29 28 25 2B 27 21 FF 24 22 2C 26 23 FF 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 80 80 80 80 80 80
+ 80 80 80 80 80 80 80 80 80 80 9F 22 01 AE];
+ };
+ sensor1 {
+ normal-cfg = [ ];
+ };
+ };
+}
+
+
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
