> Environmental humidity sensor is a hid defined sensor, > it shows raw humidity measurement of air. comments below > More information can be found in: > http://www.usb.org/developers/hidpage/HUTRR39b.pdf > > According to IIO ABI definition, humidityrelative data output unit is > milli percent. Add the unit convert from percent to milli percent. > > Signed-off-by: Song Hongyan <hongyan.song@xxxxxxxxx> > --- > .../iio/common/hid-sensors/hid-sensor-attributes.c | 2 + > drivers/iio/humidity/Kconfig | 14 + > drivers/iio/humidity/Makefile | 3 + > drivers/iio/humidity/hid-sensor-humidity.c | 314 +++++++++++++++++++++ > include/linux/hid-sensor-ids.h | 4 + > 5 files changed, 337 insertions(+) > create mode 100644 drivers/iio/humidity/hid-sensor-humidity.c > > diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c > index 7afdac42..4f280ae 100644 > --- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c > +++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c > @@ -62,6 +62,8 @@ > {HID_USAGE_SENSOR_TIME_TIMESTAMP, 0, 1000000000, 0}, > {HID_USAGE_SENSOR_TIME_TIMESTAMP, HID_USAGE_SENSOR_UNITS_MILLISECOND, > 1000000, 0}, > + > + {HID_USAGE_SENSOR_HUMIDITY, 0, 1000, 0}, > }; > > static int pow_10(unsigned power) > diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig > index 912477d..14b9ce4 100644 > --- a/drivers/iio/humidity/Kconfig > +++ b/drivers/iio/humidity/Kconfig > @@ -36,6 +36,20 @@ config HDC100X > To compile this driver as a module, choose M here: the module > will be called hdc100x. > > +config HID_SENSOR_HUMIDITY > + tristate "HID Environmental humidity sensor" > + depends on HID_SENSOR_HUB > + select IIO_BUFFER > + select IIO_TRIGGERED_BUFFER > + select HID_SENSOR_IIO_COMMON > + select HID_SENSOR_IIO_TRIGGER > + help > + Say yes here to build support for the HID SENSOR > + humidity driver > + > + To compile this driver as a module, choose M here: the module > + will be called hid-sensor-humidity. > + > config HTS221 > tristate "STMicroelectronics HTS221 sensor Driver" > depends on (I2C || SPI) > diff --git a/drivers/iio/humidity/Makefile b/drivers/iio/humidity/Makefile > index a6850e4..be0dede 100644 > --- a/drivers/iio/humidity/Makefile > +++ b/drivers/iio/humidity/Makefile > @@ -5,6 +5,7 @@ > obj-$(CONFIG_AM2315) += am2315.o > obj-$(CONFIG_DHT11) += dht11.o > obj-$(CONFIG_HDC100X) += hdc100x.o > +obj-$(CONFIG_HID_SENSOR_HUMIDITY) += hid-sensor-humidity.o > > hts221-y := hts221_core.o \ > hts221_buffer.o > @@ -15,3 +16,5 @@ obj-$(CONFIG_HTS221_SPI) += hts221_spi.o > obj-$(CONFIG_HTU21) += htu21.o > obj-$(CONFIG_SI7005) += si7005.o > obj-$(CONFIG_SI7020) += si7020.o > + > +ccflags-y += -I$(srctree)/drivers/iio/common/hid-sensors > diff --git a/drivers/iio/humidity/hid-sensor-humidity.c b/drivers/iio/humidity/hid-sensor-humidity.c > new file mode 100644 > index 0000000..bff4ceb > --- /dev/null > +++ b/drivers/iio/humidity/hid-sensor-humidity.c > @@ -0,0 +1,314 @@ > +/* > + * HID Sensors Driver > + * Copyright (c) 2017, Intel Corporation. > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License along with > + * this program. > + */ > +#include <linux/device.h> > +#include <linux/hid-sensor-hub.h> > +#include <linux/iio/buffer.h> > +#include <linux/iio/iio.h> > +#include <linux/iio/triggered_buffer.h> > +#include <linux/iio/trigger_consumer.h> > +#include <linux/module.h> > +#include <linux/platform_device.h> > + > +#include "hid-sensor-trigger.h" > + > +struct humidity_state { we want a consistent prefix, i.e. hid_humidity_ > + struct hid_sensor_common common_attributes; > + struct hid_sensor_hub_attribute_info humidity_attr; > + s32 humidity_data; > + int scale_pre_decml; > + int scale_post_decml; > + int scale_precision; > + int value_offset; > +}; > + > +/* Channel definitions */ > +static const struct iio_chan_spec humidity_channels[] = { > + { > + .type = IIO_HUMIDITYRELATIVE, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | > + BIT(IIO_CHAN_INFO_SCALE) | > + BIT(IIO_CHAN_INFO_SAMP_FREQ) | > + BIT(IIO_CHAN_INFO_HYSTERESIS), > + }, > + IIO_CHAN_SOFT_TIMESTAMP(3) should be 1 > +}; > + > +/* Adjust channel real bits based on report descriptor */ > +static void humidity_adjust_channel_bit_mask(struct iio_chan_spec *channels, > + int channel, int size) > +{ > + channels[channel].scan_type.sign = 's'; > + /* Real storage bits will change based on the report desc. */ > + channels[channel].scan_type.realbits = size * 8; > + /* Maximum size of a sample to capture is s32 */ > + channels[channel].scan_type.storagebits = sizeof(s32) * 8; > +} > + > +static int humidity_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int *val, int *val2, long mask) > +{ > + struct humidity_state *humid_st = iio_priv(indio_dev); > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + if (chan->type != IIO_HUMIDITYRELATIVE) > + return -EINVAL; > + hid_sensor_power_state(&humid_st->common_attributes, true); > + *val = sensor_hub_input_attr_get_raw_value( > + humid_st->common_attributes.hsdev, > + HID_USAGE_SENSOR_HUMIDITY, > + HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY, > + humid_st->humidity_attr.report_id, > + SENSOR_HUB_SYNC); > + hid_sensor_power_state(&humid_st->common_attributes, false); > + > + return IIO_VAL_INT; > + > + case IIO_CHAN_INFO_SCALE: > + *val = humid_st->scale_pre_decml; > + *val2 = humid_st->scale_post_decml; > + > + return humid_st->scale_precision; > + > + case IIO_CHAN_INFO_OFFSET: > + *val = humid_st->value_offset; > + > + return IIO_VAL_INT; > + > + case IIO_CHAN_INFO_SAMP_FREQ: > + return hid_sensor_read_samp_freq_value( > + &humid_st->common_attributes, val, val2); > + > + case IIO_CHAN_INFO_HYSTERESIS: > + return hid_sensor_read_raw_hyst_value( > + &humid_st->common_attributes, val, val2); > + > + default: > + return -EINVAL; > + } > +} > + > +static int humidity_write_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int val, int val2, long mask) > +{ > + struct humidity_state *humid_st = iio_priv(indio_dev); > + > + switch (mask) { > + case IIO_CHAN_INFO_SAMP_FREQ: > + return hid_sensor_write_samp_freq_value( > + &humid_st->common_attributes, val, val2); > + > + case IIO_CHAN_INFO_HYSTERESIS: > + return hid_sensor_write_raw_hyst_value( > + &humid_st->common_attributes, val, val2); > + > + default: > + return -EINVAL; > + } > +} > + > +static const struct iio_info humidity_info = { > + .driver_module = THIS_MODULE, > + .read_raw = &humidity_read_raw, > + .write_raw = &humidity_write_raw, > +}; > + > +/* Callback handler to send event after all samples are received and captured */ > +static int humidity_proc_event(struct hid_sensor_hub_device *hsdev, > + unsigned int usage_id, void *pdev) > +{ > + struct iio_dev *indio_dev = platform_get_drvdata(pdev); > + struct humidity_state *humid_st = iio_priv(indio_dev); > + > + if (atomic_read(&humid_st->common_attributes.data_ready)) > + iio_push_to_buffers_with_timestamp(indio_dev, > + &humid_st->humidity_data, > + iio_get_time_ns(indio_dev)); > + > + return 0; > +} > + > +/* Capture samples in local storage */ > +static int humidity_capture_sample(struct hid_sensor_hub_device *hsdev, > + unsigned int usage_id, size_t raw_len, > + char *raw_data, void *pdev) > +{ > + struct iio_dev *indio_dev = platform_get_drvdata(pdev); > + struct humidity_state *humid_st = iio_priv(indio_dev); > + > + switch (usage_id) { > + case HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY: > + humid_st->humidity_data = *(s32 *)raw_data; > + > + return 0; > + default: > + return -EINVAL; > + } > +} > + > +/* Parse report which is specific to an usage id*/ space missing before */ > +static int humidity_parse_report(struct platform_device *pdev, > + struct hid_sensor_hub_device *hsdev, > + struct iio_chan_spec *channels, > + unsigned int usage_id, > + struct humidity_state *st) > +{ > + int ret; > + > + ret = sensor_hub_input_get_attribute_info(hsdev, HID_INPUT_REPORT, > + usage_id, > + HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY, > + &st->humidity_attr); > + if (ret < 0) > + return ret; > + > + humidity_adjust_channel_bit_mask(channels, 0, st->humidity_attr.size); > + > + st->scale_precision = hid_sensor_format_scale( > + HID_USAGE_SENSOR_HUMIDITY, > + &st->humidity_attr, > + &st->scale_pre_decml, > + &st->scale_post_decml); > + > + /* Set Sensitivity field ids, when there is no individual modifier */ > + if (st->common_attributes.sensitivity.index < 0) > + sensor_hub_input_get_attribute_info(hsdev, > + HID_FEATURE_REPORT, usage_id, > + HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS | > + HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY, > + &st->common_attributes.sensitivity); > + > + return ret; > +} > + > +static struct hid_sensor_hub_callbacks humidity_callbacks = { > + .send_event = &humidity_proc_event, > + .capture_sample = &humidity_capture_sample, > +}; > + > +/* Function to initialize the processing for usage id */ > +static int hid_humidity_probe(struct platform_device *pdev) > +{ > + static const char *name = "humidity"; most drivers use a #define and put it somewhere near the top of the code > + struct iio_dev *indio_dev; > + struct humidity_state *humid_st; > + struct iio_chan_spec *humid_chans; > + struct hid_sensor_hub_device *hsdev = dev_get_platdata(&pdev->dev); > + int ret; > + > + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*humid_st)); > + if (!indio_dev) > + return -ENOMEM; > + > + humid_st = iio_priv(indio_dev); > + humid_st->common_attributes.hsdev = hsdev; > + humid_st->common_attributes.pdev = pdev; > + > + ret = hid_sensor_parse_common_attributes(hsdev, > + HID_USAGE_SENSOR_HUMIDITY, > + &humid_st->common_attributes); > + if (ret) > + return ret; > + > + humid_chans = devm_kmemdup(&indio_dev->dev, humidity_channels, > + sizeof(humidity_channels), GFP_KERNEL); > + if (!humid_chans) > + return -ENOMEM; > + > + ret = humidity_parse_report(pdev, hsdev, humid_chans, > + HID_USAGE_SENSOR_HUMIDITY, humid_st); > + if (ret) > + return ret; > + > + indio_dev->channels = humid_chans; > + indio_dev->num_channels = ARRAY_SIZE(humidity_channels); > + indio_dev->dev.parent = &pdev->dev; > + indio_dev->info = &humidity_info; > + indio_dev->name = name; > + indio_dev->modes = INDIO_DIRECT_MODE; > + > + ret = devm_iio_triggered_buffer_setup(&pdev->dev, indio_dev, > + &iio_pollfunc_store_time, NULL, NULL); > + if (ret) > + return ret; > + > + atomic_set(&humid_st->common_attributes.data_ready, 0); > + ret = hid_sensor_setup_trigger(indio_dev, name, > + &humid_st->common_attributes); > + if (ret) > + return ret; > + > + platform_set_drvdata(pdev, indio_dev); > + > + humidity_callbacks.pdev = pdev; > + ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_HUMIDITY, > + &humidity_callbacks); > + if (ret) > + goto error_remove_trigger; > + > + ret = devm_iio_device_register(indio_dev->dev.parent, indio_dev); don't use devm_iio_device_register() if you need _remove() > + if (ret) > + goto error_remove_callback; > + > + return ret; > + > +error_remove_callback: > + sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_HUMIDITY); > +error_remove_trigger: > + hid_sensor_remove_trigger(&humid_st->common_attributes); > + return ret; > +} > + > +/* Function to deinitialize the processing for usage id */ > +static int hid_humidity_remove(struct platform_device *pdev) > +{ > + struct hid_sensor_hub_device *hsdev = dev_get_platdata(&pdev->dev); > + struct iio_dev *indio_dev = platform_get_drvdata(pdev); > + struct humidity_state *humid_st = iio_priv(indio_dev); > + > + sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_HUMIDITY); > + hid_sensor_remove_trigger(&humid_st->common_attributes); > + > + return 0; > +} > + > +static const struct platform_device_id hid_humidity_ids[] = { > + { > + /* Format: HID-SENSOR-usage_id_in_hex_lowercase */ > + .name = "HID-SENSOR-200032", > + }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(platform, hid_humidity_ids); > + > +static struct platform_driver hid_humidity_platform_driver = { > + .id_table = hid_humidity_ids, > + .driver = { > + .name = "humidity-sensor", > + .pm = &hid_sensor_pm_ops, > + }, > + .probe = hid_humidity_probe, > + .remove = hid_humidity_remove, > +}; > +module_platform_driver(hid_humidity_platform_driver); > + > +MODULE_DESCRIPTION("HID Environmental humidity sensor"); > +MODULE_AUTHOR("Song Hongyan <hongyan.song@xxxxxxxxx>"); > +MODULE_LICENSE("GPL v2"); > diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid-sensor-ids.h > index 30c7dc4..719c928 100644 > --- a/include/linux/hid-sensor-ids.h > +++ b/include/linux/hid-sensor-ids.h > @@ -45,6 +45,10 @@ > #define HID_USAGE_SENSOR_DATA_ATMOSPHERIC_PRESSURE 0x200430 > #define HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE 0x200431 > > +/* humidity */ > +#define HID_USAGE_SENSOR_HUMIDITY 0x200032 > +#define HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY 0x200433 > + > /* Gyro 3D: (200076) */ > #define HID_USAGE_SENSOR_GYRO_3D 0x200076 > #define HID_USAGE_SENSOR_DATA_ANGL_VELOCITY 0x200456 > -- Peter Meerwald-Stadler Mobile: +43 664 24 44 418 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
