Sony's NSG-MR5U and NSG-MR7U remote controls have a full keyboard and a
touchpad. The keyboard is already supported by the existing Linux kernel
and drivers but the touchpad is not recognized. This patch adds the code
needed to bring full functionality to the touchpad.
Note that these remotes use the vendor code for SMK even though they are
Sony branded.
Known Limitations:
- The accelerometer is not supported by these changes
- The microphone in the NSG-MR7U is not supported by these changes
- When the Drag (Fn) key is used as a mouse button, the button is
automatically released when the key begins repeating. There are two
workarounds for this. 1) Use the button behind the touchpad instead of
using the Drag (Fn) key, or 2) Disable the key repeat functionality or
increase the key repeat delay.
Signed-off-by: Todd Kelner <tsopdump@xxxxxxxxx>
---
drivers/hid/hid-core.c | 2 +
drivers/hid/hid-ids.h | 2 +
drivers/hid/hid-sony.c | 130 +++++++++++++++++++++++++++++++++++++++++++++----
3 files changed, 125 insertions(+), 9 deletions(-)
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index cff060b..4dfef41 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -2054,6 +2054,8 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SKYCABLE, USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SMK, USB_DEVICE_ID_SMK_PS3_BDREMOTE) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SMK, USB_DEVICE_ID_SMK_NSG_MR5U_REMOTE) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SMK, USB_DEVICE_ID_SMK_NSG_MR7U_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_BUZZ_CONTROLLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_WIRELESS_BUZZ_CONTROLLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_MOTION_CONTROLLER) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 54bd22d..864ec34 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -904,6 +904,8 @@
#define USB_VENDOR_ID_SMK 0x0609
#define USB_DEVICE_ID_SMK_PS3_BDREMOTE 0x0306
+#define USB_DEVICE_ID_SMK_NSG_MR5U_REMOTE 0x0368
+#define USB_DEVICE_ID_SMK_NSG_MR7U_REMOTE 0x0369
#define USB_VENDOR_ID_SONY 0x054c
#define USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE 0x024b
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index f405b07..5bd4d61 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -9,6 +9,7 @@
* Copyright (c) 2006-2013 Jiri Kosina
* Copyright (c) 2013 Colin Leitner <colin.leitner@xxxxxxxxx>
* Copyright (c) 2014-2016 Frank Praznik <frank.praznik@xxxxxxxxx>
+ * Copyright (c) 2017 Todd Kelner
*/
/*
@@ -54,6 +55,8 @@
#define NAVIGATION_CONTROLLER_BT BIT(10)
#define SINO_LITE_CONTROLLER BIT(11)
#define FUTUREMAX_DANCE_MAT BIT(12)
+#define NSG_MR5U_REMOTE_BT BIT(13)
+#define NSG_MR7U_REMOTE_BT BIT(14)
#define SIXAXIS_CONTROLLER (SIXAXIS_CONTROLLER_USB | SIXAXIS_CONTROLLER_BT)
#define MOTION_CONTROLLER (MOTION_CONTROLLER_USB | MOTION_CONTROLLER_BT)
@@ -70,8 +73,11 @@
MOTION_CONTROLLER)
#define SONY_BT_DEVICE (SIXAXIS_CONTROLLER_BT | DUALSHOCK4_CONTROLLER_BT |\
MOTION_CONTROLLER_BT | NAVIGATION_CONTROLLER_BT)
+#define NSG_MRXU_REMOTE (NSG_MR5U_REMOTE_BT | NSG_MR7U_REMOTE_BT)
#define MAX_LEDS 4
+#define NSG_MRXU_MAX_X 1667
+#define NSG_MRXU_MAX_Y 1868
/*
* The Sixaxis reports both digital and analog values for each button on the
@@ -1063,7 +1069,7 @@ struct motion_output_report_02 {
#define DS4_INPUT_REPORT_BATTERY_OFFSET 30
#define DS4_INPUT_REPORT_TOUCHPAD_OFFSET 33
-#define DS4_TOUCHPAD_SUFFIX " Touchpad"
+#define TOUCHPAD_SUFFIX " Touchpad"
static DEFINE_SPINLOCK(sony_dev_list_lock);
static LIST_HEAD(sony_device_list);
@@ -1383,6 +1389,75 @@ static void dualshock4_parse_report(struct sony_sc *sc, u8 *rd, int size)
}
}
+static void nsg_mrxu_parse_report(struct sony_sc *sc, u8 *rd, int size)
+{
+ int n, offset;
+ u8 active;
+
+ /*
+ * The NSG-MRxU multi-touch trackpad data starts at offset 1 and
+ * the touch-related data starts at offset 2.
+ * For the first byte, bit 0 is set when touchpad button is pressed.
+ * Bit 3 is set when a touch is active and the drag (Fn) key is pressed.
+ * This drag key is mapped to BTN_LEFT.
+ * Bit 4 is set when only the first touch point is active.
+ * Bit 6 is set when only the second touch point is active.
+ * Bits 5 and 7 are set when both touch points are active.
+ * The next 3 bytes are two 12 bit X/Y coordinates for the first touch.
+ * The following byte, offset 5, has the touch width and length.
+ * Bits 0-4=X (width), bits 5-7=Y (length).
+ * A signed relative X coordinate is at offset 6.
+ * The bytes at offset 7-9 are the second touch X/Y coordinates.
+ * Offset 10 has the second touch width and length.
+ * Offset 11 has the relative Y coordinate.
+ */
+ offset = 1;
+
+ input_report_key(sc->touchpad, BTN_LEFT, rd[offset] & 0x0F);
+ active = (rd[offset] >> 4);
+
+ offset++;
+
+ for (n = 0; n < 2; n++) {
+ u16 x, y;
+ u8 contactx, contacty;
+ unsigned int rel_axis;
+
+ x = rd[offset] | ((rd[offset+1] & 0x0F) << 8);
+ y = ((rd[offset+1] & 0xF0) >> 4) | (rd[offset+2] << 4);
+
+ input_mt_slot(sc->touchpad, n);
+ input_mt_report_slot_state(sc->touchpad, MT_TOOL_FINGER, active & 0x03);
+
+ if (active & 0x03) {
+ contactx = rd[offset+3] & 0x0F;
+ contacty = rd[offset+3] >> 4;
+ input_report_abs(sc->touchpad, ABS_MT_TOUCH_MAJOR,
+ max(contactx, contacty));
+ input_report_abs(sc->touchpad, ABS_MT_TOUCH_MINOR,
+ max(contactx, contacty));
+ input_report_abs(sc->touchpad, ABS_MT_ORIENTATION,
+ (bool) (contactx > contacty));
+ input_report_abs(sc->touchpad, ABS_MT_POSITION_X, x);
+ input_report_abs(sc->touchpad, ABS_MT_POSITION_Y,
+ NSG_MRXU_MAX_Y - y);
+ if (n == 0)
+ rel_axis = REL_X;
+ else
+ rel_axis = REL_Y;
+
+ input_report_rel(sc->touchpad, rel_axis, rd[offset+4]);
+ }
+
+ offset += 5;
+ active >>= 2;
+ }
+
+ input_mt_sync_frame(sc->touchpad);
+
+ input_sync(sc->touchpad);
+}
+
static int sony_raw_event(struct hid_device *hdev, struct hid_report *report,
u8 *rd, int size)
{
@@ -1459,6 +1534,10 @@ static int sony_raw_event(struct hid_device *hdev, struct hid_report *report,
}
dualshock4_parse_report(sc, rd, size);
+
+ } else if (sc->quirks & NSG_MRXU_REMOTE && rd[0] == 0x02) {
+ nsg_mrxu_parse_report(sc, rd, size);
+ return 1;
}
if (sc->defer_initialization) {
@@ -1529,30 +1608,43 @@ static int sony_register_touchpad(struct sony_sc *sc, int touch_count,
sc->touchpad->id.product = sc->hdev->product;
sc->touchpad->id.version = sc->hdev->version;
- /* Append a suffix to the controller name as there are various
- * DS4 compatible non-Sony devices with different names.
- */
- name_sz = strlen(sc->hdev->name) + sizeof(DS4_TOUCHPAD_SUFFIX);
+ /* Append a suffix to the controller name to make it more unique */
+ name_sz = strlen(sc->hdev->name) + sizeof(TOUCHPAD_SUFFIX);
name = kzalloc(name_sz, GFP_KERNEL);
if (!name) {
ret = -ENOMEM;
goto err;
}
- snprintf(name, name_sz, "%s" DS4_TOUCHPAD_SUFFIX, sc->hdev->name);
+ snprintf(name, name_sz, "%s" TOUCHPAD_SUFFIX, sc->hdev->name);
sc->touchpad->name = name;
- ret = input_mt_init_slots(sc->touchpad, touch_count, 0);
- if (ret < 0)
- goto err;
+ if (!(sc->quirks & NSG_MRXU_REMOTE)) {
+ ret = input_mt_init_slots(sc->touchpad, touch_count, 0);
+ if (ret < 0)
+ goto err;
+ }
/* We map the button underneath the touchpad to BTN_LEFT. */
__set_bit(EV_KEY, sc->touchpad->evbit);
__set_bit(BTN_LEFT, sc->touchpad->keybit);
+ __clear_bit(BTN_MIDDLE, sc->touchpad->keybit);
+ __clear_bit(BTN_RIGHT, sc->touchpad->keybit);
__set_bit(INPUT_PROP_BUTTONPAD, sc->touchpad->propbit);
input_set_abs_params(sc->touchpad, ABS_MT_POSITION_X, 0, w, 0, 0);
input_set_abs_params(sc->touchpad, ABS_MT_POSITION_Y, 0, h, 0, 0);
+ if (sc->quirks & NSG_MRXU_REMOTE) {
+ __set_bit(EV_REL, sc->touchpad->evbit);
+ input_set_abs_params(sc->touchpad, ABS_MT_TOUCH_MAJOR, 0, 15, 0, 0);
+ input_set_abs_params(sc->touchpad, ABS_MT_TOUCH_MINOR, 0, 15, 0, 0);
+ input_set_abs_params(sc->touchpad, ABS_MT_ORIENTATION, 0, 1, 0, 0);
+
+ ret = input_mt_init_slots(sc->touchpad, touch_count, INPUT_MT_POINTER);
+ if (ret < 0)
+ goto err;
+ }
+
ret = input_register_device(sc->touchpad);
if (ret < 0)
goto err;
@@ -2586,6 +2678,20 @@ static int sony_input_configured(struct hid_device *hdev,
}
sony_init_output_report(sc, dualshock4_send_output_report);
+ } else if (sc->quirks & NSG_MRXU_REMOTE) {
+ /*
+ * The NSG-MRxU touchpad supports 2 touches and has a
+ * resolution of 1667x1868
+ */
+ ret = sony_register_touchpad(sc, 2,
+ NSG_MRXU_MAX_X, NSG_MRXU_MAX_Y);
+ if (ret) {
+ hid_err(sc->hdev,
+ "Unable to initialize multi-touch slots: %d\n",
+ ret);
+ goto err_stop;
+ }
+
} else if (sc->quirks & MOTION_CONTROLLER) {
sony_init_output_report(sc, motion_send_output_report);
} else {
@@ -2830,6 +2936,12 @@ static const struct hid_device_id sony_devices[] = {
/* Nyko Core Controller for PS3 */
{ HID_USB_DEVICE(USB_VENDOR_ID_SINO_LITE, USB_DEVICE_ID_SINO_LITE_CONTROLLER),
.driver_data = SIXAXIS_CONTROLLER_USB | SINO_LITE_CONTROLLER },
+ /* SMK-Link NSG-MR5U Remote Control */
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SMK, USB_DEVICE_ID_SMK_NSG_MR5U_REMOTE),
+ .driver_data = NSG_MR5U_REMOTE_BT },
+ /* SMK-Link NSG-MR7U Remote Control */
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SMK, USB_DEVICE_ID_SMK_NSG_MR7U_REMOTE),
+ .driver_data = NSG_MR7U_REMOTE_BT },
{ }
};
MODULE_DEVICE_TABLE(hid, sony_devices);
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
