On Feb 09 2017 or thereabouts, Dmitry Torokhov wrote:
> From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
>
> On the latest series of ThinkPads, the button events for the TrackPoint
> are reported through the touchpad itself as opposed to the TrackPoint
> device. In order to report these buttons properly, we need to forward
> them to the TrackPoint device and notify psmouse to send the button
> presses/releases.
>
> Signed-off-by: Lyude Paul <thatslyude@xxxxxxxxx>
> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
> Patchwork-Id: 9560561
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
> ---
Hi Dmitry,
thanks for the follow up on this series.
I had to add the following hunk to this patch for the buttons to
actually be forwarded:
diff --git a/drivers/input/rmi4/rmi_f30.c b/drivers/input/rmi4/rmi_f30.c
index 938d31e..3422464 100644
--- a/drivers/input/rmi4/rmi_f30.c
+++ b/drivers/input/rmi4/rmi_f30.c
@@ -151,10 +151,13 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
}
}
- if (f30->has_gpio)
+ if (f30->has_gpio) {
for (i = 0; i < f30->gpioled_count; i++)
if (f30->gpioled_key_map[i] != KEY_RESERVED)
rmi_f30_report_button(fn, f30, i);
+ if (f30->trackstick_buttons)
+ rmi_f03_commit_buttons(f30->f03);
+ }
return 0;
}
---
With this hunk added, I tested the series with the synaptics PS/2 path
and SMBus on a t450s, and the i2c-hid path on a development touchpad.
All seem to behave well:
Tested-By: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
Cheers,
Benjamin
> drivers/input/rmi4/rmi_driver.h | 13 ++++++++++
> drivers/input/rmi4/rmi_f03.c | 38 ++++++++++++++++++++++++++++
> drivers/input/rmi4/rmi_f30.c | 55 ++++++++++++++++++++++++++++++-----------
> 3 files changed, 91 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/input/rmi4/rmi_driver.h b/drivers/input/rmi4/rmi_driver.h
> index 6e0449cdca68..f1a2a2266022 100644
> --- a/drivers/input/rmi4/rmi_driver.h
> +++ b/drivers/input/rmi4/rmi_driver.h
> @@ -107,6 +107,19 @@ int rmi_initial_reset(struct rmi_device *rmi_dev, void *ctx,
>
> const char *rmi_f01_get_product_ID(struct rmi_function *fn);
>
> +#ifdef CONFIG_RMI4_F03
> +int rmi_f03_overwrite_button(struct rmi_function *fn, unsigned int button,
> + int value);
> +void rmi_f03_commit_buttons(struct rmi_function *fn);
> +#else
> +static inline int rmi_f03_overwrite_button(struct rmi_function *fn,
> + unsigned int button, int value)
> +{
> + return 0;
> +}
> +static inline void rmi_f03_commit_buttons(struct rmi_function *fn) {}
> +#endif
> +
> #ifdef CONFIG_RMI4_F34
> int rmi_f34_create_sysfs(struct rmi_device *rmi_dev);
> void rmi_f34_remove_sysfs(struct rmi_device *rmi_dev);
> diff --git a/drivers/input/rmi4/rmi_f03.c b/drivers/input/rmi4/rmi_f03.c
> index 9a1b099b72e0..77dad045a468 100644
> --- a/drivers/input/rmi4/rmi_f03.c
> +++ b/drivers/input/rmi4/rmi_f03.c
> @@ -26,15 +26,53 @@
> #define RMI_F03_BYTES_PER_DEVICE_SHIFT 4
> #define RMI_F03_QUEUE_LENGTH 0x0F
>
> +#define PSMOUSE_OOB_EXTRA_BTNS 0x01
> +
> struct f03_data {
> struct rmi_function *fn;
>
> struct serio *serio;
>
> + unsigned int overwrite_buttons;
> +
> u8 device_count;
> u8 rx_queue_length;
> };
>
> +int rmi_f03_overwrite_button(struct rmi_function *fn, unsigned int button,
> + int value)
> +{
> + struct f03_data *f03 = dev_get_drvdata(&fn->dev);
> + unsigned int bit;
> +
> + if (button < BTN_LEFT || button > BTN_MIDDLE)
> + return -EINVAL;
> +
> + bit = BIT(button - BTN_LEFT);
> +
> + if (value)
> + f03->overwrite_buttons |= bit;
> + else
> + f03->overwrite_buttons &= ~bit;
> +
> + return 0;
> +}
> +
> +void rmi_f03_commit_buttons(struct rmi_function *fn)
> +{
> + struct f03_data *f03 = dev_get_drvdata(&fn->dev);
> + struct serio *serio = f03->serio;
> +
> + serio_pause_rx(serio);
> + if (serio->drv) {
> + serio->drv->interrupt(serio, PSMOUSE_OOB_EXTRA_BTNS,
> + SERIO_OOB_DATA);
> + serio->drv->interrupt(serio, f03->overwrite_buttons,
> + SERIO_OOB_DATA);
> + }
> + serio_continue_rx(serio);
> +}
> +
> static int rmi_f03_pt_write(struct serio *id, unsigned char val)
> {
> struct f03_data *f03 = id->port_data;
> diff --git a/drivers/input/rmi4/rmi_f30.c b/drivers/input/rmi4/rmi_f30.c
> index c5eb4d034e84..938d31eea19a 100644
> --- a/drivers/input/rmi4/rmi_f30.c
> +++ b/drivers/input/rmi4/rmi_f30.c
> @@ -48,6 +48,9 @@
> + 1 \
> + 1)
>
> +#define TRACKSTICK_RANGE_START 3
> +#define TRACKSTICK_RANGE_END 6
> +
> struct rmi_f30_ctrl_data {
> int address;
> int length;
> @@ -76,6 +79,9 @@ struct f30_data {
> u16 *gpioled_key_map;
>
> struct input_dev *input;
> +
> + struct rmi_function *f03;
> + bool trackstick_buttons;
> };
>
> static int rmi_f30_read_control_parameters(struct rmi_function *fn,
> @@ -100,13 +106,20 @@ static void rmi_f30_report_button(struct rmi_function *fn,
> {
> unsigned int reg_num = button >> 3;
> unsigned int bit_num = button & 0x07;
> + u16 key_code = f30->gpioled_key_map[button];
> bool key_down = !(f30->data_regs[reg_num] & BIT(bit_num));
>
> - rmi_dbg(RMI_DEBUG_FN, &fn->dev,
> - "%s: call input report key (0x%04x) value (0x%02x)",
> - __func__, f30->gpioled_key_map[button], key_down);
> + if (f30->trackstick_buttons &&
> + button >= TRACKSTICK_RANGE_START &&
> + button <= TRACKSTICK_RANGE_END) {
> + rmi_f03_overwrite_button(f30->f03, key_code, key_down);
> + } else {
> + rmi_dbg(RMI_DEBUG_FN, &fn->dev,
> + "%s: call input report key (0x%04x) value (0x%02x)",
> + __func__, key_code, key_down);
>
> - input_report_key(f30->input, f30->gpioled_key_map[button], key_down);
> + input_report_key(f30->input, key_code, key_down);
> + }
> }
>
> static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
> @@ -154,6 +167,12 @@ static int rmi_f30_config(struct rmi_function *fn)
> rmi_get_platform_data(fn->rmi_dev);
> int error;
>
> + if (pdata->f30_data.trackstick_buttons) {
> + /* Try [re-]establish link to F03. */
> + f30->f03 = rmi_find_function(fn->rmi_dev, 0x03);
> + f30->trackstick_buttons = f30->f03 != NULL;
> + }
> +
> if (pdata->f30_data.disable) {
> drv->clear_irq_bits(fn->rmi_dev, fn->irq_mask);
> } else {
> @@ -203,6 +222,8 @@ static int rmi_f30_map_gpios(struct rmi_function *fn,
> rmi_get_platform_data(fn->rmi_dev);
> struct input_dev *input = f30->input;
> unsigned int button = BTN_LEFT;
> + unsigned int trackstick_button = BTN_LEFT;
> + bool button_mapped = false;
> int i;
>
> f30->gpioled_key_map = devm_kcalloc(&fn->dev,
> @@ -215,19 +236,16 @@ static int rmi_f30_map_gpios(struct rmi_function *fn,
> }
>
> for (i = 0; i < f30->gpioled_count; i++) {
> - if (rmi_f30_is_valid_button(i, f30->ctrl)) {
> + if (!rmi_f30_is_valid_button(i, f30->ctrl))
> + continue;
> +
> + if (pdata->f30_data.trackstick_buttons &&
> + i >= TRACKSTICK_RANGE_START && i < TRACKSTICK_RANGE_END) {
> + f30->gpioled_key_map[i] = trackstick_button++;
> + } else if (!pdata->f30_data.buttonpad || !button_mapped) {
> f30->gpioled_key_map[i] = button;
> input_set_capability(input, EV_KEY, button++);
> -
> - /*
> - * buttonpad might be given by
> - * f30->has_mech_mouse_btns, but I am
> - * not sure, so use only the pdata info
> - */
> - if (pdata->f30_data.buttonpad) {
> - __set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
> - break;
> - }
> + button_mapped = true;
> }
> }
>
> @@ -235,6 +253,13 @@ static int rmi_f30_map_gpios(struct rmi_function *fn,
> input->keycodesize = sizeof(f30->gpioled_key_map[0]);
> input->keycodemax = f30->gpioled_count;
>
> + /*
> + * Buttonpad could be also inferred from f30->has_mech_mouse_btns,
> + * but I am not sure, so use only the pdata info.
> + */
> + if (pdata->f30_data.buttonpad)
> + __set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
> +
> return 0;
> }
>
> --
> 2.11.0.483.g087da7b7c-goog
>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
