This patch does several cleanup changes to F30 code
- switch to using BIT() macro
- use DIV_ROUND_UP() where appropriate
- factor out code setting up and reporting buttons
- use single loop when reporting buttons: arithmetic is cheap compared to
conditionals and associated branch misprediction.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---
drivers/input/rmi4/rmi_f30.c | 326 +++++++++++++++++++------------------------
1 file changed, 144 insertions(+), 182 deletions(-)
diff --git a/drivers/input/rmi4/rmi_f30.c b/drivers/input/rmi4/rmi_f30.c
index f4b491e3e0fd..c5eb4d034e84 100644
--- a/drivers/input/rmi4/rmi_f30.c
+++ b/drivers/input/rmi4/rmi_f30.c
@@ -16,30 +16,24 @@
/* Defs for Query 0 */
#define RMI_F30_EXTENDED_PATTERNS 0x01
-#define RMI_F30_HAS_MAPPABLE_BUTTONS (1 << 1)
-#define RMI_F30_HAS_LED (1 << 2)
-#define RMI_F30_HAS_GPIO (1 << 3)
-#define RMI_F30_HAS_HAPTIC (1 << 4)
-#define RMI_F30_HAS_GPIO_DRV_CTL (1 << 5)
-#define RMI_F30_HAS_MECH_MOUSE_BTNS (1 << 6)
+#define RMI_F30_HAS_MAPPABLE_BUTTONS BIT(1)
+#define RMI_F30_HAS_LED BIT(2)
+#define RMI_F30_HAS_GPIO BIT(3)
+#define RMI_F30_HAS_HAPTIC BIT(4)
+#define RMI_F30_HAS_GPIO_DRV_CTL BIT(5)
+#define RMI_F30_HAS_MECH_MOUSE_BTNS BIT(6)
/* Defs for Query 1 */
#define RMI_F30_GPIO_LED_COUNT 0x1F
/* Defs for Control Registers */
#define RMI_F30_CTRL_1_GPIO_DEBOUNCE 0x01
-#define RMI_F30_CTRL_1_HALT (1 << 4)
-#define RMI_F30_CTRL_1_HALTED (1 << 5)
+#define RMI_F30_CTRL_1_HALT BIT(4)
+#define RMI_F30_CTRL_1_HALTED BIT(5)
#define RMI_F30_CTRL_10_NUM_MECH_MOUSE_BTNS 0x03
-struct rmi_f30_ctrl_data {
- int address;
- int length;
- u8 *regs;
-};
-
#define RMI_F30_CTRL_MAX_REGS 32
-#define RMI_F30_CTRL_MAX_BYTES ((RMI_F30_CTRL_MAX_REGS + 7) >> 3)
+#define RMI_F30_CTRL_MAX_BYTES DIV_ROUND_UP(RMI_F30_CTRL_MAX_REGS, 8)
#define RMI_F30_CTRL_MAX_REG_BLOCKS 11
#define RMI_F30_CTRL_REGS_MAX_SIZE (RMI_F30_CTRL_MAX_BYTES \
@@ -54,6 +48,12 @@ struct rmi_f30_ctrl_data {
+ 1 \
+ 1)
+struct rmi_f30_ctrl_data {
+ int address;
+ int length;
+ u8 *regs;
+};
+
struct f30_data {
/* Query Data */
bool has_extended_pattern;
@@ -81,13 +81,13 @@ struct f30_data {
static int rmi_f30_read_control_parameters(struct rmi_function *fn,
struct f30_data *f30)
{
- struct rmi_device *rmi_dev = fn->rmi_dev;
- int error = 0;
+ int error;
- error = rmi_read_block(rmi_dev, fn->fd.control_base_addr,
- f30->ctrl_regs, f30->ctrl_regs_size);
+ error = rmi_read_block(fn->rmi_dev, fn->fd.control_base_addr,
+ f30->ctrl_regs, f30->ctrl_regs_size);
if (error) {
- dev_err(&rmi_dev->dev, "%s : Could not read control registers at 0x%x error (%d)\n",
+ dev_err(&fn->dev,
+ "%s: Could not read control registers at 0x%x: %d\n",
__func__, fn->fd.control_base_addr, error);
return error;
}
@@ -95,24 +95,32 @@ static int rmi_f30_read_control_parameters(struct rmi_function *fn,
return 0;
}
+static void rmi_f30_report_button(struct rmi_function *fn,
+ struct f30_data *f30, unsigned int button)
+{
+ unsigned int reg_num = button >> 3;
+ unsigned int bit_num = button & 0x07;
+ bool key_down = !(f30->data_regs[reg_num] & BIT(bit_num));
+
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev,
+ "%s: call input report key (0x%04x) value (0x%02x)",
+ __func__, f30->gpioled_key_map[button], key_down);
+
+ input_report_key(f30->input, f30->gpioled_key_map[button], key_down);
+}
+
static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
{
struct f30_data *f30 = dev_get_drvdata(&fn->dev);
- struct rmi_device *rmi_dev = fn->rmi_dev;
- struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
- int retval;
- int gpiled = 0;
- int value = 0;
+ struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev);
+ int error;
int i;
- int reg_num;
-
- if (!f30->input)
- return 0;
/* Read the gpi led data. */
if (drvdata->attn_data.data) {
if (drvdata->attn_data.size < f30->register_count) {
- dev_warn(&fn->dev, "F30 interrupted, but data is missing\n");
+ dev_warn(&fn->dev,
+ "F30 interrupted, but data is missing\n");
return 0;
}
memcpy(f30->data_regs, drvdata->attn_data.data,
@@ -120,72 +128,21 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
drvdata->attn_data.data += f30->register_count;
drvdata->attn_data.size -= f30->register_count;
} else {
- retval = rmi_read_block(rmi_dev, fn->fd.data_base_addr,
- f30->data_regs, f30->register_count);
-
- if (retval) {
- dev_err(&fn->dev, "%s: Failed to read F30 data registers.\n",
- __func__);
- return retval;
- }
- }
-
- for (reg_num = 0; reg_num < f30->register_count; ++reg_num) {
- for (i = 0; gpiled < f30->gpioled_count && i < 8; ++i,
- ++gpiled) {
- if (f30->gpioled_key_map[gpiled] != 0) {
- /* buttons have pull up resistors */
- value = (((f30->data_regs[reg_num] >> i) & 0x01)
- == 0);
-
- rmi_dbg(RMI_DEBUG_FN, &fn->dev,
- "%s: call input report key (0x%04x) value (0x%02x)",
- __func__,
- f30->gpioled_key_map[gpiled], value);
- input_report_key(f30->input,
- f30->gpioled_key_map[gpiled],
- value);
- }
-
+ error = rmi_read_block(fn->rmi_dev, fn->fd.data_base_addr,
+ f30->data_regs, f30->register_count);
+ if (error) {
+ dev_err(&fn->dev,
+ "%s: Failed to read F30 data registers: %d\n",
+ __func__, error);
+ return error;
}
}
- return 0;
-}
-
-static int rmi_f30_register_device(struct rmi_function *fn)
-{
- int i;
- struct rmi_device *rmi_dev = fn->rmi_dev;
- struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev);
- struct f30_data *f30 = dev_get_drvdata(&fn->dev);
- struct input_dev *input_dev;
- int button_count = 0;
-
- input_dev = drv_data->input;
- if (!input_dev) {
- dev_info(&fn->dev, "F30: no input device found, ignoring.\n");
- return -EINVAL;
- }
-
- f30->input = input_dev;
-
- set_bit(EV_KEY, input_dev->evbit);
-
- input_dev->keycode = f30->gpioled_key_map;
- input_dev->keycodesize = sizeof(u16);
- input_dev->keycodemax = f30->gpioled_count;
-
- for (i = 0; i < f30->gpioled_count; i++) {
- if (f30->gpioled_key_map[i] != 0) {
- input_set_capability(input_dev, EV_KEY,
- f30->gpioled_key_map[i]);
- button_count++;
- }
- }
+ if (f30->has_gpio)
+ for (i = 0; i < f30->gpioled_count; i++)
+ if (f30->gpioled_key_map[i] != KEY_RESERVED)
+ rmi_f30_report_button(fn, f30, i);
- if (button_count == 1)
- __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
return 0;
}
@@ -204,19 +161,20 @@ static int rmi_f30_config(struct rmi_function *fn)
error = rmi_write_block(fn->rmi_dev, fn->fd.control_base_addr,
f30->ctrl_regs, f30->ctrl_regs_size);
if (error) {
- dev_err(&fn->rmi_dev->dev,
- "%s : Could not write control registers at 0x%x error (%d)\n",
+ dev_err(&fn->dev,
+ "%s: Could not write control registers at 0x%x: %d\n",
__func__, fn->fd.control_base_addr, error);
return error;
}
drv->set_irq_bits(fn->rmi_dev, fn->irq_mask);
}
+
return 0;
}
-static inline void rmi_f30_set_ctrl_data(struct rmi_f30_ctrl_data *ctrl,
- int *ctrl_addr, int len, u8 **reg)
+static void rmi_f30_set_ctrl_data(struct rmi_f30_ctrl_data *ctrl,
+ int *ctrl_addr, int len, u8 **reg)
{
ctrl->address = *ctrl_addr;
ctrl->length = len;
@@ -225,8 +183,7 @@ static inline void rmi_f30_set_ctrl_data(struct rmi_f30_ctrl_data *ctrl,
*reg += len;
}
-static inline bool rmi_f30_is_valid_button(int button,
- struct rmi_f30_ctrl_data *ctrl)
+static bool rmi_f30_is_valid_button(int button, struct rmi_f30_ctrl_data *ctrl)
{
int byte_position = button >> 3;
int bit_position = button & 0x07;
@@ -239,32 +196,60 @@ static inline bool rmi_f30_is_valid_button(int button,
(ctrl[3].regs[byte_position] & BIT(bit_position));
}
-static inline int rmi_f30_initialize(struct rmi_function *fn)
+static int rmi_f30_map_gpios(struct rmi_function *fn,
+ struct f30_data *f30)
{
- struct f30_data *f30;
- struct rmi_device *rmi_dev = fn->rmi_dev;
- const struct rmi_device_platform_data *pdata;
- int retval = 0;
- int control_address;
+ const struct rmi_device_platform_data *pdata =
+ rmi_get_platform_data(fn->rmi_dev);
+ struct input_dev *input = f30->input;
+ unsigned int button = BTN_LEFT;
int i;
- int button;
- u8 buf[RMI_F30_QUERY_SIZE];
- u8 *ctrl_reg;
- u8 *map_memory;
- f30 = devm_kzalloc(&fn->dev, sizeof(struct f30_data),
- GFP_KERNEL);
- if (!f30)
+ f30->gpioled_key_map = devm_kcalloc(&fn->dev,
+ f30->gpioled_count,
+ sizeof(f30->gpioled_key_map[0]),
+ GFP_KERNEL);
+ if (!f30->gpioled_key_map) {
+ dev_err(&fn->dev, "Failed to allocate gpioled map memory.\n");
return -ENOMEM;
+ }
- dev_set_drvdata(&fn->dev, f30);
+ for (i = 0; i < f30->gpioled_count; i++) {
+ if (rmi_f30_is_valid_button(i, f30->ctrl)) {
+ f30->gpioled_key_map[i] = button;
+ input_set_capability(input, EV_KEY, button++);
+
+ /*
+ * buttonpad might be given by
+ * f30->has_mech_mouse_btns, but I am
+ * not sure, so use only the pdata info
+ */
+ if (pdata->f30_data.buttonpad) {
+ __set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
+ break;
+ }
+ }
+ }
+
+ input->keycode = f30->gpioled_key_map;
+ input->keycodesize = sizeof(f30->gpioled_key_map[0]);
+ input->keycodemax = f30->gpioled_count;
+
+ return 0;
+}
- retval = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr, buf,
- RMI_F30_QUERY_SIZE);
+static int rmi_f30_initialize(struct rmi_function *fn, struct f30_data *f30)
+{
+ u8 *ctrl_reg = f30->ctrl_regs;
+ int control_address = fn->fd.control_base_addr;
+ u8 buf[RMI_F30_QUERY_SIZE];
+ int error;
- if (retval) {
- dev_err(&fn->dev, "Failed to read query register.\n");
- return retval;
+ error = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr,
+ buf, RMI_F30_QUERY_SIZE);
+ if (error) {
+ dev_err(&fn->dev, "Failed to read query register\n");
+ return error;
}
f30->has_extended_pattern = buf[0] & RMI_F30_EXTENDED_PATTERNS;
@@ -276,101 +261,71 @@ static inline int rmi_f30_initialize(struct rmi_function *fn)
f30->has_mech_mouse_btns = buf[0] & RMI_F30_HAS_MECH_MOUSE_BTNS;
f30->gpioled_count = buf[1] & RMI_F30_GPIO_LED_COUNT;
- f30->register_count = (f30->gpioled_count + 7) >> 3;
-
- control_address = fn->fd.control_base_addr;
- ctrl_reg = f30->ctrl_regs;
+ f30->register_count = DIV_ROUND_UP(f30->gpioled_count, 8);
if (f30->has_gpio && f30->has_led)
rmi_f30_set_ctrl_data(&f30->ctrl[0], &control_address,
- f30->register_count, &ctrl_reg);
+ f30->register_count, &ctrl_reg);
- rmi_f30_set_ctrl_data(&f30->ctrl[1], &control_address, sizeof(u8),
- &ctrl_reg);
+ rmi_f30_set_ctrl_data(&f30->ctrl[1], &control_address,
+ sizeof(u8), &ctrl_reg);
if (f30->has_gpio) {
rmi_f30_set_ctrl_data(&f30->ctrl[2], &control_address,
- f30->register_count, &ctrl_reg);
+ f30->register_count, &ctrl_reg);
rmi_f30_set_ctrl_data(&f30->ctrl[3], &control_address,
- f30->register_count, &ctrl_reg);
+ f30->register_count, &ctrl_reg);
}
if (f30->has_led) {
- int ctrl5_len;
-
rmi_f30_set_ctrl_data(&f30->ctrl[4], &control_address,
- f30->register_count, &ctrl_reg);
-
- if (f30->has_extended_pattern)
- ctrl5_len = 6;
- else
- ctrl5_len = 2;
+ f30->register_count, &ctrl_reg);
rmi_f30_set_ctrl_data(&f30->ctrl[5], &control_address,
- ctrl5_len, &ctrl_reg);
+ f30->has_extended_pattern ? 6 : 2,
+ &ctrl_reg);
}
if (f30->has_led || f30->has_gpio_driver_control) {
/* control 6 uses a byte per gpio/led */
rmi_f30_set_ctrl_data(&f30->ctrl[6], &control_address,
- f30->gpioled_count, &ctrl_reg);
+ f30->gpioled_count, &ctrl_reg);
}
if (f30->has_mappable_buttons) {
/* control 7 uses a byte per gpio/led */
rmi_f30_set_ctrl_data(&f30->ctrl[7], &control_address,
- f30->gpioled_count, &ctrl_reg);
+ f30->gpioled_count, &ctrl_reg);
}
if (f30->has_haptic) {
rmi_f30_set_ctrl_data(&f30->ctrl[8], &control_address,
- f30->register_count, &ctrl_reg);
+ f30->register_count, &ctrl_reg);
rmi_f30_set_ctrl_data(&f30->ctrl[9], &control_address,
- sizeof(u8), &ctrl_reg);
+ sizeof(u8), &ctrl_reg);
}
if (f30->has_mech_mouse_btns)
rmi_f30_set_ctrl_data(&f30->ctrl[10], &control_address,
- sizeof(u8), &ctrl_reg);
+ sizeof(u8), &ctrl_reg);
- f30->ctrl_regs_size = ctrl_reg - f30->ctrl_regs
- ?: RMI_F30_CTRL_REGS_MAX_SIZE;
+ f30->ctrl_regs_size = ctrl_reg -
+ f30->ctrl_regs ?: RMI_F30_CTRL_REGS_MAX_SIZE;
- retval = rmi_f30_read_control_parameters(fn, f30);
- if (retval < 0) {
+ error = rmi_f30_read_control_parameters(fn, f30);
+ if (error) {
dev_err(&fn->dev,
- "Failed to initialize F19 control params.\n");
- return retval;
- }
-
- map_memory = devm_kzalloc(&fn->dev,
- (f30->gpioled_count * (sizeof(u16))),
- GFP_KERNEL);
- if (!map_memory) {
- dev_err(&fn->dev, "Failed to allocate gpioled map memory.\n");
- return -ENOMEM;
+ "Failed to initialize F30 control params: %d\n",
+ error);
+ return error;
}
- f30->gpioled_key_map = (u16 *)map_memory;
-
- pdata = rmi_get_platform_data(rmi_dev);
if (f30->has_gpio) {
- button = BTN_LEFT;
- for (i = 0; i < f30->gpioled_count; i++) {
- if (rmi_f30_is_valid_button(i, f30->ctrl)) {
- f30->gpioled_key_map[i] = button++;
-
- /*
- * buttonpad might be given by
- * f30->has_mech_mouse_btns, but I am
- * not sure, so use only the pdata info
- */
- if (pdata->f30_data.buttonpad)
- break;
- }
- }
+ error = rmi_f30_map_gpios(fn, f30);
+ if (error)
+ return error;
}
return 0;
@@ -378,26 +333,33 @@ static inline int rmi_f30_initialize(struct rmi_function *fn)
static int rmi_f30_probe(struct rmi_function *fn)
{
- int rc;
+ struct rmi_device *rmi_dev = fn->rmi_dev;
const struct rmi_device_platform_data *pdata =
- rmi_get_platform_data(fn->rmi_dev);
+ rmi_get_platform_data(rmi_dev);
+ struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev);
+ struct f30_data *f30;
+ int error;
if (pdata->f30_data.disable)
return 0;
- rc = rmi_f30_initialize(fn);
- if (rc < 0)
- goto error_exit;
+ if (!drv_data->input) {
+ dev_info(&fn->dev, "F30: no input device found, ignoring\n");
+ return -ENXIO;
+ }
- rc = rmi_f30_register_device(fn);
- if (rc < 0)
- goto error_exit;
+ f30 = devm_kzalloc(&fn->dev, sizeof(*f30), GFP_KERNEL);
+ if (!f30)
+ return -ENOMEM;
- return 0;
+ f30->input = drv_data->input;
-error_exit:
- return rc;
+ error = rmi_f30_initialize(fn, f30);
+ if (error)
+ return error;
+ dev_set_drvdata(&fn->dev, f30);
+ return 0;
}
struct rmi_function_handler rmi_f30_handler = {
--
2.11.0.483.g087da7b7c-goog
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
