Re: [PATCH resend] input: touchscreen: silead: Add regulator support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Hans,

On Mon, Nov 14, 2016 at 03:45:02PM +0100, Hans de Goede wrote:
> On some tablets the touchscreen controller is powered by seperate
> regulators, add support for this.
> 
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> ---
>  .../bindings/input/touchscreen/silead_gsl1680.txt  |  2 +
>  drivers/input/touchscreen/silead.c                 | 51 ++++++++++++++++++++--
>  2 files changed, 49 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
> index e844c3f..b726823 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
> @@ -22,6 +22,8 @@ Optional properties:
>  - touchscreen-inverted-y  : See touchscreen.txt
>  - touchscreen-swapped-x-y : See touchscreen.txt
>  - silead,max-fingers	  : maximum number of fingers the touchscreen can detect
> +- vddio-supply		  : regulator phandle for controller VDDIO
> +- avdd-supply		  : regulator phandle for controller AVDD
>  
>  Example:
>  
> diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c
> index f502c84..c6a1ae9 100644
> --- a/drivers/input/touchscreen/silead.c
> +++ b/drivers/input/touchscreen/silead.c
> @@ -29,6 +29,7 @@
>  #include <linux/input/touchscreen.h>
>  #include <linux/pm.h>
>  #include <linux/irq.h>
> +#include <linux/regulator/consumer.h>
>  
>  #include <asm/unaligned.h>
>  
> @@ -72,6 +73,8 @@ enum silead_ts_power {
>  struct silead_ts_data {
>  	struct i2c_client *client;
>  	struct gpio_desc *gpio_power;
> +	struct regulator *vddio;
> +	struct regulator *avdd;
>  	struct input_dev *input;
>  	char fw_name[64];
>  	struct touchscreen_properties prop;
> @@ -465,21 +468,52 @@ static int silead_ts_probe(struct i2c_client *client,
>  	if (client->irq <= 0)
>  		return -ENODEV;
>  
> +	data->vddio = devm_regulator_get_optional(dev, "vddio");
> +	if (IS_ERR(data->vddio)) {
> +		if (PTR_ERR(data->vddio) == -EPROBE_DEFER)
> +			return -EPROBE_DEFER;
> +		data->vddio = NULL;

Why do we ignore other errors? If there is an issue reported by
regulator framework we should net be ignoring it.

Unless regulator is truly optional (i.e. chip can work with some
functionality powered off) and not simply hidden (firmware takes care of
powering up system), we should not be using regulator_get_optional():
if regulator is absent from ACPI/DT/etc, regulator framework will supply
dummy regulator that you can enable/disable and not bothering checking
whether it is NULL or not.

Also, please consider using devm_regulator_bulk_get().

> +	}
> +
> +	data->avdd = devm_regulator_get_optional(dev, "avdd");
> +	if (IS_ERR(data->avdd)) {
> +		if (PTR_ERR(data->avdd) == -EPROBE_DEFER)
> +			return -EPROBE_DEFER;
> +		data->avdd = NULL;
> +	}
> +
> +	/*
> +	 * Enable regulators at probe and disable them at remove, we need
> +	 * to keep the chip powered otherwise it forgets its firmware.
> +	 */
> +	if (data->vddio) {
> +		error = regulator_enable(data->vddio);
> +		if (error)
> +			return error;
> +	}
> +
> +	if (data->avdd) {
> +		error = regulator_enable(data->avdd);
> +		if (error)
> +			goto disable_vddio;
> +	}

Use devm_add_action_or_reset() to work regulator_bulk_disable call into
devm stream. As it is you are leaving regulators on on unbind/remove.

> +
>  	/* Power GPIO pin */
>  	data->gpio_power = devm_gpiod_get_optional(dev, "power", GPIOD_OUT_LOW);
>  	if (IS_ERR(data->gpio_power)) {
>  		if (PTR_ERR(data->gpio_power) != -EPROBE_DEFER)
>  			dev_err(dev, "Shutdown GPIO request failed\n");
> -		return PTR_ERR(data->gpio_power);
> +		error = PTR_ERR(data->gpio_power);
> +		goto disable_avdd;
>  	}
>  
>  	error = silead_ts_setup(client);
>  	if (error)
> -		return error;
> +		goto disable_avdd;
>  
>  	error = silead_ts_request_input_dev(data);
>  	if (error)
> -		return error;
> +		goto disable_avdd;
>  
>  	error = devm_request_threaded_irq(dev, client->irq,
>  					  NULL, silead_ts_threaded_irq_handler,
> @@ -487,10 +521,19 @@ static int silead_ts_probe(struct i2c_client *client,
>  	if (error) {
>  		if (error != -EPROBE_DEFER)
>  			dev_err(dev, "IRQ request failed %d\n", error);
> -		return error;
> +		goto disable_avdd;
>  	}
>  
>  	return 0;
> +
> +disable_avdd:
> +	if (data->avdd)
> +		regulator_disable(data->avdd);
> +disable_vddio:
> +	if (data->vddio)
> +		regulator_disable(data->vddio);
> +
> +	return error;
>  }
>  
>  static int __maybe_unused silead_ts_suspend(struct device *dev)
> -- 
> 2.9.3
> 

Thanks.

-- 
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux