On Thu, Jul 07, 2016 at 09:37:59AM -0700, jeffrey.lin wrote:
> add checksum for touch report points.
>
> Signed-off-by: jeffrey.lin <jeffrey.lin@xxxxxxxxxx>
> ---
> drivers/input/touchscreen/raydium_i2c_ts.c | 86 +++++++++++++++++++-----------
> 1 file changed, 56 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c
> index f3076d9..de31b41 100644
> --- a/drivers/input/touchscreen/raydium_i2c_ts.c
> +++ b/drivers/input/touchscreen/raydium_i2c_ts.c
> @@ -70,6 +70,8 @@
> #define RM_CONTACT_WIDTH_X_POS 6
> #define RM_CONTACT_WIDTH_Y_POS 7
>
> +#define RM_CONTACT_CRC_OFFSET 2
This is not offset, this is size, or length, of CRC.
> +
> /* Bootloader relative info */
> #define RM_BL_WRT_CMD_SIZE 3 /* bl flash wrt cmd size */
> #define RM_BL_WRT_PKG_SIZE 32 /* bl wrt pkg size */
> @@ -137,6 +139,7 @@ struct raydium_data {
> u32 data_bank_addr;
> u8 report_size;
> u8 contact_size;
> + u8 pkg_size;
>
> enum raydium_boot_mode boot_mode;
>
> @@ -280,12 +283,14 @@ static int raydium_i2c_query_ts_info(struct raydium_data *ts)
> * then the size changed (due to firmware update?) and keep
> * old size instead.
> */
> - if (ts->report_data && ts->report_size != data_info.pkg_size)
> + if (ts->report_data && ts->pkg_size != data_info.pkg_size)
> dev_warn(&client->dev,
> "report size changes, was: %d, new: %d\n",
> - ts->report_size, data_info.pkg_size);
> - else
> - ts->report_size = data_info.pkg_size;
> + ts->pkg_size, data_info.pkg_size);
> + else {
> + ts->pkg_size = data_info.pkg_size;
> + ts->report_size = ts->pkg_size - RM_CONTACT_CRC_OFFSET;
> + }
>
> ts->contact_size = data_info.tp_info_size;
> ts->data_bank_addr = le32_to_cpu(data_info.data_bank_addr);
> @@ -612,6 +617,17 @@ static int raydium_i2c_fw_write_page(struct i2c_client *client,
> return error;
> }
>
> +static u16 raydium_calc_chksum(const u8 *buf, u16 len)
> +{
> + u16 checksum = 0;
> + u16 i;
> +
> + for (i = 0; i < len; i++)
> + checksum += buf[i];
> +
> + return checksum;
> +}
> +
> static int raydium_i2c_do_update_firmware(struct raydium_data *ts,
> const struct firmware *fw)
> {
> @@ -724,9 +740,7 @@ static int raydium_i2c_do_update_firmware(struct raydium_data *ts,
> return error;
> }
>
> - fw_checksum = 0;
> - for (i = 0; i < fw->size; i++)
> - fw_checksum += fw->data[i];
> + fw_checksum = raydium_calc_chksum(fw->data, fw->size);
>
> error = raydium_i2c_write_checksum(client, fw->size, fw_checksum);
> if (error)
> @@ -780,15 +794,6 @@ out_enable_irq:
> static void raydium_mt_event(struct raydium_data *ts)
> {
> int i;
> - int error;
> -
> - error = raydium_i2c_read_message(ts->client, ts->data_bank_addr,
> - ts->report_data, ts->report_size);
> - if (error) {
> - dev_err(&ts->client->dev, "%s: failed to read data: %d\n",
> - __func__, error);
> - return;
> - }
>
> for (i = 0; i < ts->report_size / ts->contact_size; i++) {
> u8 *contact = &ts->report_data[ts->contact_size * i];
> @@ -798,33 +803,54 @@ static void raydium_mt_event(struct raydium_data *ts)
> input_mt_slot(ts->input, i);
> input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, state);
>
> - if (!state)
> - continue;
> -
> - input_report_abs(ts->input, ABS_MT_POSITION_X,
> + if (state == 0x01) {
Why we need this change? How is it related to CRC? Do you intent to
report contact as active but not emit any position data of state is
neither 0 nor 1?
> + input_report_abs(ts->input, ABS_MT_POSITION_X,
> get_unaligned_le16(&contact[RM_CONTACT_X_POS]));
> - input_report_abs(ts->input, ABS_MT_POSITION_Y,
> + input_report_abs(ts->input, ABS_MT_POSITION_Y,
> get_unaligned_le16(&contact[RM_CONTACT_Y_POS]));
> - input_report_abs(ts->input, ABS_MT_PRESSURE,
> - contact[RM_CONTACT_PRESSURE_POS]);
> + input_report_abs(ts->input, ABS_MT_PRESSURE,
> + contact[RM_CONTACT_PRESSURE_POS]);
>
> - wx = contact[RM_CONTACT_WIDTH_X_POS];
> - wy = contact[RM_CONTACT_WIDTH_Y_POS];
> + wx = contact[RM_CONTACT_WIDTH_X_POS];
> + wy = contact[RM_CONTACT_WIDTH_Y_POS];
>
> - input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR, max(wx, wy));
> - input_report_abs(ts->input, ABS_MT_TOUCH_MINOR, min(wx, wy));
> + input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR,
> + max(wx, wy));
> + input_report_abs(ts->input, ABS_MT_TOUCH_MINOR,
> + min(wx, wy));
> + }
> }
>
> input_mt_sync_frame(ts->input);
> input_sync(ts->input);
> }
>
> +static void raydium_i2c_event(struct raydium_data *ts)
> +{
> + u16 fw_crc;
> + u16 calc_crc = raydium_calc_chksum(ts->report_data, ts->report_size);
> +
> + fw_crc = get_unaligned_le16(&ts->report_data[ts->report_size]);
> +
> + if (unlikely(fw_crc != calc_crc))
> + dev_warn(&ts->client->dev,
> + "%s: invalid packet crc %04x &. %04x\n",
> + __func__, calc_crc, fw_crc);
> + else
> + raydium_mt_event(ts);
> +}
> +
> static irqreturn_t raydium_i2c_irq(int irq, void *_dev)
> {
> struct raydium_data *ts = _dev;
> + int error;
>
> - if (ts->boot_mode != RAYDIUM_TS_BLDR)
> - raydium_mt_event(ts);
> + if (ts->boot_mode == RAYDIUM_TS_MAIN) {
> + error = raydium_i2c_read_message(ts->client, ts->data_bank_addr,
> + ts->report_data, ts->pkg_size);
> + if (!error)
> + raydium_i2c_event(ts);
> + }
This chunk seems to belong to some other patch.
>
> return IRQ_HANDLED;
> }
> @@ -1050,7 +1076,7 @@ static int raydium_i2c_probe(struct i2c_client *client,
> }
>
> ts->report_data = devm_kmalloc(&client->dev,
> - ts->report_size, GFP_KERNEL);
> + ts->pkg_size, GFP_KERNEL);
> if (!ts->report_data)
> return -ENOMEM;
>
> --
> 2.1.2
>
Thanks.
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
