Re: [RESEND] Lenovo Yoga 900 touchpad issues

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jiri,

On Wed, Dec 16, 2015 at 5:18 AM, Jiri Kosina <jikos@xxxxxxxxxx> wrote:
> On Wed, 16 Dec 2015, Mika Westerberg wrote:
>
>> > [Apologies for the resend, didn't realize I hadn't changed my GMail settings
>> > to not use HTML.]
>> >
>> > I have recently purchased a Lenovo Yoga 900 and most everything is working
>> > with a slightly modified 4.4-rc5 (https://lkml.org/lkml/2015/11/30/441 applied
>> > to enable the touchpad itself), I am seeing two issues:
>> >
>> > 1) On suspend/resume, the touchpad is non-functional. A `modprobe -r i2c-hid;
>> >  modprobe i2c-hid` "fixes" it.
>> >
>> > The kernel emits:
>> >
>> > i2c_hid i2c-SYNA2B29:00: failed to reset device.
>> > dpm_run_callback(): i2c_hid_resume+0x0/0xc0 [i2c_hid] returns -61
>> > PM: Device i2c-SYNA2B29:00 failed to resume: error -61
>> >
>> > During the resume. So perhaps this is a timing issue (given that once
>> > resumed, the
>> > module reload does work?).
>>
>> Linus noticed this as well and Jiri suggested the below patch which
>> seemed to fix the issue (although it increased resume time a bit).
>>
>> I was supposed to get one Lenovo Yoga 900 here to debug this issue but
>> I'm still waiting for it (sloow big corporation bureaucracy takes some
>> time to get things purchased outside).
>>
>> diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
>> index 55d8f9d..52dd03a0 100644
>> --- a/drivers/hid/i2c-hid/i2c-hid.c
>> +++ b/drivers/hid/i2c-hid/i2c-hid.c
>> @@ -1121,10 +1121,16 @@ static int i2c_hid_resume(struct device *dev)
>>       struct i2c_client *client = to_i2c_client(dev);
>>       struct i2c_hid *ihid = i2c_get_clientdata(client);
>>       struct hid_device *hid = ihid->hid;
>> -     int wake_status;
>> +     int wake_status, tries = 3;
>>
>>       enable_irq(ihid->irq);
>> -     ret = i2c_hid_hwreset(client);
>> +
>> +     do {
>> +             ret = i2c_hid_hwreset(client);
>> +             if (ret)
>> +                     msleep(1000);
>> +     } while (tries-- > 0 && ret);
>> +
>>       if (ret)
>>               return ret;
>
> As a possible alternative, please test the patch above on top of for-next
> branch of
>
>         git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
>
> It contains 64bebefcf3 ("HID: enable hid device to suspend/resume
> asynchronously") and knowing whether that changes something might be
> interesting datapoint as well.

What should I be looking for to be different wrt. that tree? Should I
not see the failure to reset the device? Or would it be (relatively)
speedier than the stock kernel?

Thanks,
Nish
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux