On Tue, Dec 15, 2015 at 11:14:32AM -0800, Nish Aravamudan wrote: > [Apologies for the resend, didn't realize I hadn't changed my GMail settings > to not use HTML.] > > I have recently purchased a Lenovo Yoga 900 and most everything is working > with a slightly modified 4.4-rc5 (https://lkml.org/lkml/2015/11/30/441 applied > to enable the touchpad itself), I am seeing two issues: > > 1) On suspend/resume, the touchpad is non-functional. A `modprobe -r i2c-hid; > modprobe i2c-hid` "fixes" it. > > The kernel emits: > > i2c_hid i2c-SYNA2B29:00: failed to reset device. > dpm_run_callback(): i2c_hid_resume+0x0/0xc0 [i2c_hid] returns -61 > PM: Device i2c-SYNA2B29:00 failed to resume: error -61 > > During the resume. So perhaps this is a timing issue (given that once > resumed, the > module reload does work?). Linus noticed this as well and Jiri suggested the below patch which seemed to fix the issue (although it increased resume time a bit). I was supposed to get one Lenovo Yoga 900 here to debug this issue but I'm still waiting for it (sloow big corporation bureaucracy takes some time to get things purchased outside). diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c index 55d8f9d..52dd03a0 100644 --- a/drivers/hid/i2c-hid/i2c-hid.c +++ b/drivers/hid/i2c-hid/i2c-hid.c @@ -1121,10 +1121,16 @@ static int i2c_hid_resume(struct device *dev) struct i2c_client *client = to_i2c_client(dev); struct i2c_hid *ihid = i2c_get_clientdata(client); struct hid_device *hid = ihid->hid; - int wake_status; + int wake_status, tries = 3; enable_irq(ihid->irq); - ret = i2c_hid_hwreset(client); + + do { + ret = i2c_hid_hwreset(client); + if (ret) + msleep(1000); + } while (tries-- > 0 && ret); + if (ret) return ret; -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
