On 06/16/2015 04:46 AM, Matt Ranostay wrote:
Several cap11xx variants have LEDs that be can be controlled, this
patchset implements this functionality.
Signed-off-by: Matt Ranostay <mranostay@xxxxxxxxx>
---
drivers/input/keyboard/cap11xx.c | 128 ++++++++++++++++++++++++++++++++++++++-
1 file changed, 125 insertions(+), 3 deletions(-)
diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c
index f07461a..fc8d365 100644
--- a/drivers/input/keyboard/cap11xx.c
+++ b/drivers/input/keyboard/cap11xx.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/input.h>
+#include <linux/leds.h>
#include <linux/of_irq.h>
#include <linux/regmap.h>
#include <linux/i2c.h>
@@ -47,6 +48,20 @@
#define CAP11XX_REG_CONFIG2 0x44
#define CAP11XX_REG_CONFIG2_ALT_POL BIT(6)
#define CAP11XX_REG_SENSOR_BASE_CNT(X) (0x50 + (X))
+#define CAP11XX_REG_LED_POLARITY 0x73
+#define CAP11XX_REG_LED_OUTPUT_CONTROL 0x74
+
+#define CAP11XX_REG_LED_DUTY_CYCLE_1 0x90
+#define CAP11XX_REG_LED_DUTY_CYCLE_2 0x91
+#define CAP11XX_REG_LED_DUTY_CYCLE_3 0x92
+#define CAP11XX_REG_LED_DUTY_CYCLE_4 0x93
+
+#define CAP11XX_REG_LED_DUTY_MIN_MASK (0x0f)
+#define CAP11XX_REG_LED_DUTY_MIN_MASK_SHIFT (0)
+#define CAP11XX_REG_LED_DUTY_MAX_MASK (0xf0)
+#define CAP11XX_REG_LED_DUTY_MAX_MASK_SHIFT (4)
+#define CAP11XX_REG_LED_DUTY_MAX_VALUE (15)
+
#define CAP11XX_REG_SENSOR_CALIB (0xb1 + (X))
#define CAP11XX_REG_SENSOR_CALIB_LSB1 0xb9
#define CAP11XX_REG_SENSOR_CALIB_LSB2 0xba
@@ -56,10 +71,24 @@
#define CAP11XX_MANUFACTURER_ID 0x5d
+#ifdef CONFIG_LEDS_CLASS
+struct cap11xx_led {
+ struct cap11xx_priv *priv;
+ struct led_classdev cdev;
+ struct work_struct work;
+ u32 reg;
+ enum led_brightness new_brightness;
+};
+#endif
+
struct cap11xx_priv {
struct regmap *regmap;
struct input_dev *idev;
+#ifdef CONFIG_LEDS_CLASS
+ struct cap11xx_led *leds;
+ int num_leds;
+#endif
/* config */
u32 keycodes[];
};
@@ -67,6 +96,7 @@ struct cap11xx_priv {
struct cap11xx_hw_model {
u8 product_id;
unsigned int num_channels;
+ unsigned int num_leds;
};
enum {
@@ -76,9 +106,9 @@ enum {
};
static const struct cap11xx_hw_model cap11xx_devices[] = {
- [CAP1106] = { .product_id = 0x55, .num_channels = 6 },
- [CAP1126] = { .product_id = 0x53, .num_channels = 6 },
- [CAP1188] = { .product_id = 0x50, .num_channels = 8 },
+ [CAP1106] = { .product_id = 0x55, .num_channels = 6, .num_leds = 0 },
+ [CAP1126] = { .product_id = 0x53, .num_channels = 6, .num_leds = 2 },
+ [CAP1188] = { .product_id = 0x50, .num_channels = 8, .num_leds = 8 },
};
static const struct reg_default cap11xx_reg_defaults[] = {
@@ -111,6 +141,7 @@ static const struct reg_default cap11xx_reg_defaults[] = {
{ CAP11XX_REG_STANDBY_SENSITIVITY, 0x02 },
{ CAP11XX_REG_STANDBY_THRESH, 0x40 },
{ CAP11XX_REG_CONFIG2, 0x40 },
+ { CAP11XX_REG_LED_POLARITY, 0x00 },
{ CAP11XX_REG_SENSOR_CALIB_LSB1, 0x00 },
{ CAP11XX_REG_SENSOR_CALIB_LSB2, 0x00 },
};
@@ -196,6 +227,91 @@ static void cap11xx_input_close(struct input_dev *idev)
cap11xx_set_sleep(priv, true);
}
+#ifdef CONFIG_LEDS_CLASS
+static void cap11xx_led_work(struct work_struct *work)
+{
+ struct cap11xx_led *led = container_of(work, struct cap11xx_led, work);
+ struct cap11xx_priv *priv = led->priv;
+ int value = led->new_brightness;
+
+ /*
+ * All LEDs share the same duty cycle as this is a HW limitation.
+ * Brightness levels per LED are either 0 (OFF) and 1 (ON).
+ *
+ * Actual brightness level for the ON state for all LEDS is set via the
+ * "linux,led-brightness" DT property.
+ */
+ regmap_update_bits(priv->regmap, CAP11XX_REG_LED_OUTPUT_CONTROL,
+ BIT(led->reg), !!value ? BIT(led->reg) : 0);
You don't need '!!' before value. Any non-zero value is evaluated
to true in conditions.
+}
+
+static void cap11xx_led_set(struct led_classdev *cdev,
+ enum led_brightness value)
+{
+ struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev);
+
+ led->new_brightness = value;
+ schedule_work(&led->work);
+}
+
+static int cap11xx_init_leds(struct device *dev, struct cap11xx_priv *priv)
+{
+ struct device_node *node = dev->of_node, *child;
+ struct cap11xx_led *led;
+ int cnt = of_get_child_count(node);
+ u32 reg = 0;
+ int error;
+
+ if (!priv->num_leds || !cnt)
+ return 0;
+ if (cnt > priv->num_leds)
+ return -EINVAL;
+
+ led = devm_kcalloc(dev, cnt,
+ sizeof(struct cap11xx_led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ priv->leds = led;
+ error = of_property_read_u32(node, "linux,led-brightness", ®);
+ if (error || reg == 0 || reg > CAP11XX_REG_LED_DUTY_MAX_VALUE)
+ reg = CAP11XX_REG_LED_DUTY_MAX_VALUE;
+
+ error = regmap_update_bits(priv->regmap, CAP11XX_REG_LED_DUTY_CYCLE_4,
+ CAP11XX_REG_LED_DUTY_MAX_MASK,
+ reg << CAP11XX_REG_LED_DUTY_MAX_MASK_SHIFT);
+ if (error)
+ return error;
+
+ for_each_child_of_node(node, child) {
+ led->cdev.name =
+ of_get_property(child, "label", NULL) ? : child->name;
+ led->cdev.default_trigger =
+ of_get_property(child, "linux,default-trigger", NULL);
+ led->cdev.flags = 0;
+ led->cdev.brightness_set = cap11xx_led_set;
+ led->cdev.max_brightness = 1;
+ led->cdev.brightness = LED_OFF;
+
+ error = of_property_read_u32(child, "reg", ®);
+ if (error != 0 || reg >= priv->num_leds)
+ continue;
+ led->reg = reg;
+ led->priv = priv;
+
+ INIT_WORK(&led->work, cap11xx_led_work);
+ error = devm_led_classdev_register(dev, &led->cdev);
+ if (error < 0)
+ return -EINVAL;
+
+ schedule_work(&led->work);
Why do you schedule work here? It should be done only in brightness_set op.
+ led++;
+ };
+
+ return 0;
+}
+#endif
+
static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
const struct i2c_device_id *id)
{
@@ -316,6 +432,12 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
priv->idev->open = cap11xx_input_open;
priv->idev->close = cap11xx_input_close;
+#ifdef CONFIG_LEDS_CLASS
+ priv->num_leds = cap->num_leds;
+ error = cap11xx_init_leds(dev, priv);
+ if (error)
+ return error;
+#endif
input_set_drvdata(priv->idev, priv);
/*
--
Best Regards,
Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
