Currently we are reporting the button state as inverted on all boards with an axp209 pmic, tested on a ba10-tvbox, bananapi, bananapro, cubietruck and utoo-p66 tablet. The axp209 datasheet clearly states that the power button must be connected between the PWRON key and ground. Which means that on a press we will get a falling edge (dbf) irq not a rising one, and likewise on release we will get a rising edge (dbr) irq, not a falling one. This commit swaps the check for the 2 irqs fixing the inverted reporting of the power button state. Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- drivers/input/misc/axp20x-pek.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/input/misc/axp20x-pek.c b/drivers/input/misc/axp20x-pek.c index f1c8447..10e140a 100644 --- a/drivers/input/misc/axp20x-pek.c +++ b/drivers/input/misc/axp20x-pek.c @@ -167,9 +167,13 @@ static irqreturn_t axp20x_pek_irq(int irq, void *pwr) struct input_dev *idev = pwr; struct axp20x_pek *axp20x_pek = input_get_drvdata(idev); - if (irq == axp20x_pek->irq_dbr) + /* + * The power-button is connected to ground so a falling edge (dbf) + * means it is pressed. + */ + if (irq == axp20x_pek->irq_dbf) input_report_key(idev, KEY_POWER, true); - else if (irq == axp20x_pek->irq_dbf) + else if (irq == axp20x_pek->irq_dbr) input_report_key(idev, KEY_POWER, false); input_sync(idev); -- 2.4.3 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
