RE: [PATCH 6/9] input: goodix: write configuration data to device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Bastien Nocera [mailto:hadess@xxxxxxxxxx]
> Sent: 04 June, 2015 15:55
> To: Tirdea, Irina
> Cc: Mark Rutland; Dmitry Torokhov; linux-input@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Purdila,
> Octavian
> Subject: Re: [PATCH 6/9] input: goodix: write configuration data to device
> 
> On Thu, 2015-05-28 at 13:51 +0000, Tirdea, Irina wrote:
> >
> > > -----Original Message-----
> > > From: Mark Rutland [mailto:mark.rutland@xxxxxxx]
> > > Sent: 28 May, 2015 16:22
> > > To: Tirdea, Irina
> > > Cc: Dmitry Torokhov; Bastien Nocera; linux-input@xxxxxxxxxxxxxxx;
> > > devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> > > Purdila, Octavian
> > > Subject: Re: [PATCH 6/9] input: goodix: write configuration data to
> > > device
> > >
> > > On Thu, May 28, 2015 at 01:47:42PM +0100, Irina Tirdea wrote:
> > > > Goodix devices can be configured by writing this information
> > > > to the device at init. The configuration data can
> > > > be provided through the ACPI/device tree property
> > > > "device-config". If "device-config" is not set, the default
> > > > device configuration will be used.
> > > >
> > > > Signed-off-by: Octavian Purdila <octavian.purdila@xxxxxxxxx>
> > > > Signed-off-by: Irina Tirdea <irina.tirdea@xxxxxxxxx>
> > > > ---
> > > >  .../bindings/input/touchscreen/goodix.txt          |   5 +
> > > >  drivers/input/touchscreen/goodix.c                 | 143
> > > > +++++++++++++++++++++
> > > >  2 files changed, 148 insertions(+)
> > > >
> > > > diff --git
> > > > a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> > > b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> > > > index 7137881..9e4ff69 100644
> > > > ---
> > > > a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> > > > +++
> > > > b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> > > > @@ -15,6 +15,11 @@ Required properties:
> > > >   - irq-gpio              : GPIO pin used for IRQ
> > > >   - reset-gpio            : GPIO pin used for reset
> > > >
> > > > +Optional properties:
> > > > +
> > > > + - device-config : device configuration information
> > > > (specified as byte
> > > > +                   array). Maximum size is 240 bytes.
> > >
> > > Generally we frown on passing opaque data.
> > >
> > > What exactly is encoded in device-config? The description is very
> > > vague.
> > >
> > > Does this correspond to anything in a data sheet or manual?
> >
> > Yes, it is configuration data described in chapter 6.2. b of the
> > datasheet:
> > https://drive.google.com/folderview?id=0BxCVOQS3ZymGfmJyY2RKbE5XbVlKN
> > lktVTlwV0lxNEdxd2dzeWZER094cmJPVnMxN1F0Yzg&usp=sharing.
> > This includes things like x/y resolution, maximum touch numbers
> > supported,
> > interrupt flags, various sensitivity factors.
> >
> > I should have included a link to the datasheet in the commit message
> > - will do that in v2 for all patches.
> >
> > I did consider writing this as firmware, but it seems that some
> > Goodix touchscreens have a
> > real firmware they need to write in addition to this configuration
> > data.
> > If there is a better way to do this, please let me know and I will
> > change it.
> 
> I would at least expect an excerpt from an ACPI DSDT that would make
> use of that feature.

Ok, I will add this to the commit message.
��.n��������+%������w��{.n�����{��)��^n�r������&��z�ޗ�zf���h���~����������_��+v���)ߣ�


[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux