Hi, On Thu, May 28, 2015 at 01:47:41PM +0100, Irina Tirdea wrote: > After power on, it is recommended that the driver resets the device. > For reset the driver needs to control the interrupt and > reset gpio pins (configured through ACPI/device tree). Why is it necessary to mess with the GPIO the interrupts is wired up to? What exactly does the device expect at reset w.r.t. the interrupt line? > > Signed-off-by: Octavian Purdila <octavian.purdila@xxxxxxxxx> > Signed-off-by: Irina Tirdea <irina.tirdea@xxxxxxxxx> > --- > .../bindings/input/touchscreen/goodix.txt | 5 ++ > drivers/input/touchscreen/goodix.c | 99 ++++++++++++++++++++++ > 2 files changed, 104 insertions(+) > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt > index 8ba98ee..7137881 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt > +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt > @@ -12,6 +12,8 @@ Required properties: > - reg : I2C address of the chip. Should be 0x5d or 0x14 > - interrupt-parent : Interrupt controller to which the chip is connected > - interrupts : Interrupt to which the chip is connected > + - irq-gpio : GPIO pin used for IRQ > + - reset-gpio : GPIO pin used for reset > > Example: > > @@ -23,6 +25,9 @@ Example: > reg = <0x5d>; > interrupt-parent = <&gpio>; > interrupts = <0 0>; > + > + irq-gpio = <&gpio1 0 0>; > + reset-gpio = <&gpio1 1 0>; > }; > > /* ... */ > diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c > index 9e7d215..4405c55 100644 > --- a/drivers/input/touchscreen/goodix.c > +++ b/drivers/input/touchscreen/goodix.c > @@ -26,6 +26,7 @@ > #include <linux/acpi.h> > #include <linux/of.h> > #include <asm/unaligned.h> > +#include <linux/gpio.h> Nit: weird include ordering. Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
