Hi Hn,
On Mon, May 11, 2015 at 01:11:39AM +0800, HungNien Chen wrote:
> Signed-off-by: HungNien Chen <hn.chen@xxxxxxxxxxxxxxx>
Thank you for making the requested changes. Some more comments below.
> ---
> drivers/input/touchscreen/Kconfig | 12 +
> drivers/input/touchscreen/Makefile | 1 +
> drivers/input/touchscreen/wdt87xx_i2c.c | 1509 +++++++++++++++++++++++++++++++
> 3 files changed, 1522 insertions(+)
> create mode 100644 drivers/input/touchscreen/wdt87xx_i2c.c
>
> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> index 80f6386..0c1a6cc 100644
> --- a/drivers/input/touchscreen/Kconfig
> +++ b/drivers/input/touchscreen/Kconfig
> @@ -658,6 +658,18 @@ config TOUCHSCREEN_PIXCIR
> To compile this driver as a module, choose M here: the
> module will be called pixcir_i2c_ts.
>
> +config TOUCHSCREEN_WDT87XX_I2C
> + tristate "Weida HiTech I2C touchscreen"
> + depends on I2C
> + help
> + Say Y here if you have an Weida WDT87XX I2C touchscreen
> + connected to your system.
> +
> + If unsure, say N.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called wdt87xx_i2c.
> +
> config TOUCHSCREEN_WM831X
> tristate "Support for WM831x touchscreen controllers"
> depends on MFD_WM831X
> diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
> index 44deea7..fa3d33b 100644
> --- a/drivers/input/touchscreen/Makefile
> +++ b/drivers/input/touchscreen/Makefile
> @@ -72,6 +72,7 @@ obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o
> obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o
> obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o
> obj-$(CONFIG_TOUCHSCREEN_WACOM_I2C) += wacom_i2c.o
> +obj-$(CONFIG_TOUCHSCREEN_WDT87XX_I2C) += wdt87xx_i2c.o
> obj-$(CONFIG_TOUCHSCREEN_WM831X) += wm831x-ts.o
> obj-$(CONFIG_TOUCHSCREEN_WM97XX) += wm97xx-ts.o
> wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) += wm9705.o
> diff --git a/drivers/input/touchscreen/wdt87xx_i2c.c b/drivers/input/touchscreen/wdt87xx_i2c.c
> new file mode 100644
> index 0000000..e3eef1c
> --- /dev/null
> +++ b/drivers/input/touchscreen/wdt87xx_i2c.c
> @@ -0,0 +1,1509 @@
> +/*
> + * Weida HiTech WDT87xx TouchScreen I2C driver
> + *
> + * Copyright (c) 2014 Weida HiTech Ltd.
> + * HN Chen <hn.chen@xxxxxxxxxxxxxxx>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * Note: this is a I2C device driver and report touch events througt the
> + * input device
> + */
> +
> +
> +#include <linux/version.h>
> +#include <linux/i2c.h>
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/delay.h>
> +#include <linux/gpio.h>
> +#include <linux/irq.h>
> +#include <linux/ioc4.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/proc_fs.h>
> +#include <linux/slab.h>
> +#include <linux/firmware.h>
> +#include <linux/gpio.h>
> +#include <linux/input/mt.h>
> +#include <asm/unaligned.h>
> +#include <linux/acpi.h>
> +
> +#define WDT87XX_NAME "wdt87xx_i2c"
> +#define WDT87XX_DRV_VER "0.9.2"
> +#define WDT87XX_FW_NAME "wdt87xx_fw.bin"
> +
> +#define WDT87XX_FW 1
> +#define WDT87XX_CFG 2
> +
> +#define MODE_ACTIVE 0x01
> +#define MODE_READY 0x02
> +#define MODE_IDLE 0x03
> +#define MODE_SLEEP 0x04
> +#define MODE_STOP 0xFF
> +
> +#define WDT_MAX_POINT 10
> +#define WDT_RAW_BUF_COUNT 54
> +
> +#define PG_SIZE 0x1000
> +#define MAX_RETRIES 3
> +
> +#define WDT_UNITS_PER_MM 60
> +
> +/* the definition for one finger */
> +#define FINGER_EV_OFFSET_ID 0
> +#define FINGER_EV_OFFSET_X 1
> +#define FINGER_EV_OFFSET_Y 3
> +#define FINGER_EV_SIZE 5
> +
> +/* the definition for a packet */
> +#define TOUCH_PK_OFFSET_REPORT_ID 0
> +#define TOUCH_PK_OFFSET_EVENT 1
> +#define TOUCH_PK_OFFSET_SCAN_TIME 51
> +#define TOUCH_PK_OFFSET_FNGR_NUM 53
> +
> +/* the definition for the controller parameters */
> +#define CTL_PARAM_OFFSET_FW_ID 0
> +#define CTL_PARAM_OFFSET_PLAT_ID 2
> +#define CTL_PARAM_OFFSET_XMLS_ID1 4
> +#define CTL_PARAM_OFFSET_XMLS_ID2 6
> +#define CTL_PARAM_OFFSET_PHY_X 8
> +#define CTL_PARAM_OFFSET_PHY_Y 10
> +
> +struct sys_param {
> + unsigned short fw_id;
> + unsigned short plat_id;
> + unsigned short xmls_id1;
> + unsigned short xmls_id2;
> + unsigned short phy_x;
> + unsigned short phy_y;
> +} __packed;
> +
> +/* the definition for this driver needed */
> +struct wdt87xx_ts_data {
> + struct i2c_client *client;
> + struct input_dev *input_dev;
> +/* to protect the operation in sysfs */
> + struct mutex sysfs_mutex;
> + unsigned int max_retries;
> + struct sys_param sys_param;
> + u8 finger_last_flag[WDT_MAX_POINT<<1];
> +};
> +
> +/* communacation commands */
> +#define PACKET_SIZE 56
> +#define VND_REQ_READ 0x06
> +#define VND_READ_DATA 0x07
> +#define VND_REQ_WRITE 0x08
> +
> +#define VND_CMD_START 0x00
> +#define VND_CMD_STOP 0x01
> +#define VND_CMD_RESET 0x09
> +
> +#define VND_CMD_ERASE 0x1A
> +
> +#define VND_GET_CHECKSUM 0x66
> +
> +#define VND_SET_DATA 0x83
> +#define VND_SET_COMMAND_DATA 0x84
> +#define VND_SET_CHECKSUM_CALC 0x86
> +#define VND_SET_CHECKSUM_LENGTH 0x87
> +
> +#define VND_CMD_SFLCK 0xFC
> +#define VND_CMD_SFUNL 0xFD
> +
> +#define STRIDX_PLATFORM_ID 0x80
> +#define STRIDX_PARAMETERS 0x81
> +
> +
> +/* the definition of command structure */
> +union cmd_data {
> + struct {
> + unsigned char report_id;
> + unsigned char type;
> + unsigned short index;
> + unsigned int length;
> + } defined_data;
> + unsigned char buffer[8];
> +};
> +
> +/* the definition of packet structure */
> +union req_data {
> + struct {
> + unsigned char report_id;
> + unsigned char type;
> + unsigned short index;
> + unsigned int length;
> + unsigned char data[PACKET_SIZE];
> + } defined_data;
> + unsigned char buffer[64];
> +};
> +
> +/* the definition of firmware data structure */
> +struct chunk_info {
> + unsigned int target_start_addr;
> + unsigned int length;
> + unsigned int source_start_addr;
> + unsigned int version_number;
> + unsigned int attribute;
> + unsigned int temp;
> +};
> +
> +struct chunk_data {
> + unsigned int ck_id;
> + unsigned int ck_size;
> + struct chunk_info chunk_info;
> + char *data;
> +};
> +
> +struct format_chunk {
> + unsigned int ck_id;
> + unsigned int ck_size;
> + unsigned int number_chunk;
> + unsigned int enable_flag;
> + unsigned int checksum;
> + unsigned int temp1;
> + unsigned int temp2;
> +};
> +
> +struct chunk_info_ex {
> + struct chunk_info chunk_info;
> + char *data;
> + unsigned int length;
> +};
> +
> +/* the definition of firmware chunk tags */
> +#define FOURCC_ID_RIFF 0x46464952
> +#define FOURCC_ID_WHIF 0x46494857
> +#define FOURCC_ID_FRMT 0x544D5246
> +#define FOURCC_ID_FRWR 0x52575246
> +#define FOURCC_ID_CNFG 0x47464E43
> +
> +#define CHUNK_ID_FRMT 0x00
> +#define CHUNK_ID_FRWR 0x01
> +#define CHUNK_ID_CNFG 0x02
> +
> +/* for the touch report */
> +static int SCREEN_LOGICAL_MAX_X = 0x7FFF;
> +static int SCREEN_LOGICAL_MAX_Y = 0x7FFF;
> +
> +/* output the error message */
> +#define dev_err(__dev, x...) dev_err(__dev, x)
Why is this needed?
> +
> +static int wdt87xx_i2c_txrxdata(struct i2c_client *client, char *txdata,
> + int txlen, char *rxdata, int rxlen);
> +static int wdt87xx_i2c_rxdata(struct i2c_client *client, char *rxdata,
> + int length);
> +static int wdt87xx_i2c_txdata(struct i2c_client *client, char *txdata,
> + int length);
> +static int wdt87xx_set_feature(struct i2c_client *client, unsigned char *buf,
> + unsigned int buf_size);
> +static int wdt87xx_get_feature(struct i2c_client *client, unsigned char *buf,
> + unsigned int buf_size);
> +static int wdt87xx_get_string(struct i2c_client *client, unsigned char str_idx,
> + unsigned char *buf, unsigned int buf_size);
> +
> +static unsigned int get_chunk_fourcc(unsigned int chunk_index)
> +{
> + switch (chunk_index) {
> + case CHUNK_ID_FRMT:
> + return FOURCC_ID_FRMT;
> + case CHUNK_ID_FRWR:
> + return FOURCC_ID_FRWR;
> + case CHUNK_ID_CNFG:
> + return FOURCC_ID_CNFG;
> + default:
> + return 0;
> + }
> + return 0;
Why do we need this conversion from CHUNK_ID_* to FOURCC_ID_*? Why can't
callers operate on original values?
> +}
> +
> +static int get_chunk_info(const struct firmware *fw, unsigned int chunk_index,
> + struct chunk_info_ex *fw_chunk_info,
> + struct format_chunk *wif_format_chunk)
> +{
> + unsigned int chunk_four_cc;
> + const char *data = 0;
> + unsigned int data_len = 0;
> + unsigned int is_found = 0;
bool
> +
> + /* check the pointer is null */
> + if (!fw || !fw_chunk_info || !wif_format_chunk)
> + return -EINVAL;
> +
> + chunk_four_cc = get_chunk_fourcc(chunk_index);
> +
> + if (!chunk_four_cc)
> + return -EBADRQC;
-EINVAL
> +
> + data = fw->data;
> + data_len = fw->size;
> +
> + /* check if the chunk is existed */
> + if (wif_format_chunk->enable_flag | chunk_index) {
> + unsigned int start_pos = 12 + sizeof(struct format_chunk);
> + struct chunk_data chunk;
> + unsigned int ck_id, ck_size;
> +
> + while (start_pos < data_len && !is_found) {
> + ck_id = get_unaligned_le32(&data[start_pos]);
> + ck_size = get_unaligned_le32(&data[start_pos+4]);
> +
> + /* the chunk is found */
> + if (ck_id == chunk_four_cc) {
> + chunk.ck_id = ck_id;
> + chunk.ck_size = ck_size;
> +
> + chunk.data = (char *) &data[start_pos + 8
> + + sizeof(struct chunk_info)];
> + chunk.chunk_info.target_start_addr =
> + get_unaligned_le32(&data[start_pos+8]);
> + chunk.chunk_info.length =
> + get_unaligned_le32(&data[start_pos+12]);
> + chunk.chunk_info.source_start_addr =
> + get_unaligned_le32(&data[start_pos+16]);
> + chunk.chunk_info.version_number =
> + get_unaligned_le32(&data[start_pos+20]);
> + chunk.chunk_info.attribute =
> + get_unaligned_le32(&data[start_pos+24]);
> + chunk.chunk_info.temp =
> + get_unaligned_le32(&data[start_pos+28]);
> +
> + memcpy(&fw_chunk_info->chunk_info,
> + &chunk.chunk_info,
> + sizeof(struct chunk_info));
> +
> + fw_chunk_info->length = chunk.chunk_info.length;
> + fw_chunk_info->data = chunk.data;
> +
> + is_found = 1;
> + } else
> + start_pos = start_pos + ck_size + 8;
> + }
> + }
> +
> + if (is_found)
> + return 0;
> +
> + return -ENODATA;
> +}
> +
> +static int wdt87xx_get_sysparam(struct i2c_client *client,
> + struct wdt87xx_ts_data *dev_wdt87xx)
> +{
> + struct sys_param *ctr_param = &dev_wdt87xx->sys_param;
> + unsigned char buffer[72];
Please add a #define for 72. In general, please use symbolic names
instead of numeric constants.
> + int err = 0;
Please do not initialize variables unless actually needed. For example
you assign this variable a value 2 lines below. Gratuitous assignments
suppress compiler warnings about variables used while uninitialized
which may alert you to code paths where you forgot to assign them proper
value.
> +
> + err = wdt87xx_get_string(client, STRIDX_PARAMETERS, buffer, 32);
> + if (err) {
> + dev_err(&client->dev, "get parameters error (%d)\n", err);
> + return err;
> + }
> +
> + ctr_param->xmls_id1 =
> + get_unaligned_le16(buffer + CTL_PARAM_OFFSET_XMLS_ID1);
> + ctr_param->xmls_id2 =
> + get_unaligned_le16(buffer + CTL_PARAM_OFFSET_XMLS_ID2);
> + ctr_param->phy_x =
> + get_unaligned_le16(buffer + CTL_PARAM_OFFSET_PHY_X);
> + ctr_param->phy_y =
> + get_unaligned_le16(buffer + CTL_PARAM_OFFSET_PHY_Y);
> +
> + err = wdt87xx_get_string(client, STRIDX_PLATFORM_ID, buffer, 8);
> + if (err) {
> + dev_err(&client->dev, "get platform id error (%d)\n", err);
> + return err;
> + }
> +
> + ctr_param->plat_id = buffer[1];
> +
> + buffer[0] = 0xf2;
> + err = wdt87xx_get_feature(client, buffer, 16);
> + if (err) {
> + dev_err(&client->dev, "get firmware id error (%d)\n", err);
> + return err;
> + }
> +
> + if (buffer[0] != 0xf2) {
> + dev_err(&client->dev, "fw id packet error: %x\n", buffer[0]);
> + return -EBADRQC;
> + }
> +
> + ctr_param->fw_id = get_unaligned_le16(&buffer[1]);
> +
> + dev_dbg(&client->dev, "fw_id: 0x%x, plat_id: 0x%x\n",
> + ctr_param->fw_id, ctr_param->plat_id);
> + dev_dbg(&client->dev, "xml_id1: %4x, xml_id2: %4x\n",
> + ctr_param->xmls_id1, ctr_param->xmls_id2);
> +
> + return 0;
> +}
> +
> +int process_fw_data(struct i2c_client *client, const struct firmware *fw,
> + struct format_chunk *wif_format_chunk)
static. In fact every one of the functions and module-global structs in
this file should be static.
> +{
> + struct wdt87xx_ts_data *dev_wdt87xx = i2c_get_clientdata(client);
> + unsigned int length = 0;
> + struct chunk_info_ex fw_chunk_info;
> + int err = 0;
> + unsigned int *u32_data;
> + unsigned char fw_id;
> + unsigned char chip_id;
> + unsigned int data1, data2;
> +
> + /* check the pointer is null */
> + if (!fw || !wif_format_chunk)
> + return -EINVAL;
> +
> + u32_data = (unsigned int *) fw->data;
> + length = fw->size;
> +
> + data1 = get_unaligned_le32(&u32_data[0]);
> + data2 = get_unaligned_le32(&u32_data[2]);
> + if (data1 != FOURCC_ID_RIFF || data2 != FOURCC_ID_WHIF) {
> + dev_err(&client->dev, "Check data tag failed !\n");
> + return -EBADRQC;
> + }
> +
> + /* the length should be equal */
> + data1 = get_unaligned_le32(&u32_data[1]);
> + if (data1 != length) {
> + dev_err(&client->dev, "Check data length failed !\n");
> + return -EINVAL;
> + }
> +
> + wif_format_chunk->ck_id = get_unaligned_le32(&u32_data[3]);
> + wif_format_chunk->ck_size = get_unaligned_le32(&u32_data[4]);
> + wif_format_chunk->number_chunk = get_unaligned_le32(&u32_data[5]);
> + wif_format_chunk->enable_flag = get_unaligned_le32(&u32_data[6]);
> + wif_format_chunk->checksum = get_unaligned_le32(&u32_data[7]);
> + wif_format_chunk->temp1 = get_unaligned_le32(&u32_data[8]);
> + wif_format_chunk->temp2 = get_unaligned_le32(&u32_data[9]);
> +
> + dev_dbg(&client->dev, "version checking\n");
> +
> + /* get the version number from the firmware */
> + err = get_chunk_info(fw, CHUNK_ID_FRWR, &fw_chunk_info,
> + wif_format_chunk);
> + if (err) {
> + dev_err(&client->dev, "can not extract data !\n");
> + return -EBADR;
> + }
> +
> + fw_id = ((fw_chunk_info.chunk_info.version_number >> 12) & 0xF);
> + chip_id = (((dev_wdt87xx->sys_param.fw_id) >> 12) & 0xF);
> +
> + if (fw_id != chip_id) {
> + wdt87xx_get_sysparam(client, dev_wdt87xx);
Why would it be different now?
> + chip_id = (((dev_wdt87xx->sys_param.fw_id) >> 12) & 0xF);
> +
> + if (fw_id != chip_id) {
> + dev_err(&client->dev, "FW is not match: ");
> + dev_err(&client->dev, "fw(%d), chip(%d)\n",
> + fw_id, chip_id);
> + return -ENODEV;
> + }
> + }
> +
> + return 0;
> +}
> +
> +/* functions for the sysfs implementation */
> +static int wdt87xx_check_firmware(struct chunk_info_ex *fw_chunk_info,
> + int ck_id)
> +{
> + unsigned int data;
> +
> + /* check the pointer is null */
> + if (!fw_chunk_info)
> + return -EINVAL;
Why would it be? This is an internal function in one driver, not general
purpose API. I think you can rely on callers passing you reasonable
data.
> +
> + if (ck_id == CHUNK_ID_FRWR) {
> + unsigned int is_found = 0;
> + unsigned int firmware_id = 0xa9e368f5;
+ data = get_unaligned_le32(fw_chunk_info->data);
> + if (data == firmware_id)
> + is_found = 1;
> + else
> + return -EFAULT;
> +
> + if (is_found)
> + return 0;
This is too complicated...
fw_id = get_unaligned_le32(fw_chunk_info->data);
if (fw_id != WDT78XX_FIRMWARE_ID)
return -EINVAL;
> +
>
> + }
> +
> + return 0;
> +}
> +
> +static int wdt87xx_set_feature(struct i2c_client *client, unsigned char *buf,
> + unsigned int buf_size)
> +{
> + int err = 0;
> + union req_data *req_data_set = (union req_data *) buf;
> + int data_len = 0;
> + /* for set/get packets used */
> + unsigned char xfer_buffer[80];
> +
> + /* buffer size must be smaller than 64 */
> + if (buf_size > 64)
> + buf_size = 64;
Then you need to return error if you see it larger.
> +
> + /* set feature command packet */
> + xfer_buffer[data_len++] = 0x22;
> + xfer_buffer[data_len++] = 0x00;
> + if (req_data_set->defined_data.report_id > 0xF) {
> + xfer_buffer[data_len++] = 0x30;
> + xfer_buffer[data_len++] = 0x03;
> + xfer_buffer[data_len++] = req_data_set->defined_data.report_id;
> + } else {
> + xfer_buffer[data_len++] = 0x30 |
> + req_data_set->defined_data.report_id;
> + xfer_buffer[data_len++] = 0x03;
> + }
> + xfer_buffer[data_len++] = 0x23;
> + xfer_buffer[data_len++] = 0x00;
> + xfer_buffer[data_len++] = (buf_size & 0xFF);
> + xfer_buffer[data_len++] = ((buf_size & 0xFF00) >> 8);
> +
> + memcpy(&xfer_buffer[data_len], buf, buf_size);
> +
> + err = wdt87xx_i2c_txdata(client, xfer_buffer, data_len + buf_size);
> +
> + if (err < 0) {
> + dev_err(&client->dev, "error no: (%d)\n", err);
> + return err;
> + }
> +
> + mdelay(2);
> +
> + return 0;
> +}
> +
> +static int wdt87xx_get_feature(struct i2c_client *client, unsigned char *buf,
> + unsigned int buf_size)
> +{
> + int err = 0;
> + unsigned char tx_buffer[8];
> + unsigned char xfer_buffer[80];
> + union req_data *req_data_get = (union req_data *) buf;
> + int data_len = 0;
> + unsigned int xfer_length = 0;
> +
> + if (buf_size > 64)
> + buf_size = 64;
> +
> + /* get feature command packet */
> + tx_buffer[data_len++] = 0x22;
> + tx_buffer[data_len++] = 0x00;
> + if (req_data_get->defined_data.report_id > 0xF) {
> + tx_buffer[data_len++] = 0x30;
> + tx_buffer[data_len++] = 0x02;
> + tx_buffer[data_len++] = req_data_get->defined_data.report_id;
> + } else {
> + tx_buffer[data_len++] = 0x30 |
> + req_data_get->defined_data.report_id;
> + tx_buffer[data_len++] = 0x02;
> + }
> + tx_buffer[data_len++] = 0x23;
> + tx_buffer[data_len++] = 0x00;
> +
> + err = wdt87xx_i2c_txrxdata(client, tx_buffer, data_len, xfer_buffer,
> + buf_size + 2);
> +
> + if (err < 0) {
> + dev_err(&client->dev, "error no: (%d)\n", err);
> + return err;
> + }
> +
> + /* check size and copy the return data */
> + xfer_length = get_unaligned_le16(xfer_buffer);
> +
> + if (buf_size < xfer_length)
> + xfer_length = buf_size;
> +
> + memcpy(buf, &xfer_buffer[2], xfer_length);
> +
> + mdelay(2);
> +
> + return 0;
> +}
> +
> +static int wdt87xx_get_string(struct i2c_client *client, unsigned char str_idx,
> + unsigned char *buf, unsigned int buf_size)
> +{
> + int err = 0;
> + unsigned char tx_buffer[8] = { 0x22, 0x00, 0x13, 0x0E,
> + 0x00, 0x23, 0x00, 0x00 };
> + unsigned char xfer_buffer[80];
> + unsigned int xfer_length;
> +
> + if (buf_size > 64)
> + buf_size = 64;
> +
> + tx_buffer[4] = str_idx;
> +
> + err = wdt87xx_i2c_txrxdata(client, tx_buffer, 7, xfer_buffer,
> + buf_size + 2);
> +
> + if (err < 0) {
> + dev_err(&client->dev, "error no: (%d)\n", err);
> + return err;
> + }
> +
> + if (xfer_buffer[1] != 0x03) {
> + dev_err(&client->dev, "error str id: (%d)\n", xfer_buffer[1]);
> + return -EBADRQC;
> + }
> +
> + xfer_length = xfer_buffer[0];
> +
> + if (buf_size < xfer_length)
> + xfer_length = buf_size;
> +
> + memcpy(buf, &xfer_buffer[2], xfer_length);
> +
> + mdelay(2);
> +
> + return 0;
> +}
> +
> +
> +static int wdt87xx_send_command(struct i2c_client *client, int cmd, int value)
> +{
> + union cmd_data cmd_data_send;
> +
> + /* set the command packet */
> + cmd_data_send.defined_data.report_id = VND_REQ_WRITE;
> + cmd_data_send.defined_data.type = VND_SET_COMMAND_DATA;
> + put_unaligned_le16((unsigned short) cmd,
> + &cmd_data_send.defined_data.index);
> +
> + switch (cmd) {
> + case VND_CMD_START:
> + case VND_CMD_STOP:
> + case VND_CMD_RESET:
> + /* mode selector */
> + put_unaligned_le32((value & 0xFF),
> + &cmd_data_send.defined_data.length);
> + break;
> + case VND_CMD_SFLCK:
> + put_unaligned_le16(0xC39B, &cmd_data_send.buffer[3]);
> + break;
> + case VND_CMD_SFUNL:
> + put_unaligned_le16(0x95DA, &cmd_data_send.buffer[3]);
> + break;
> + case VND_CMD_ERASE:
> + case VND_SET_CHECKSUM_CALC:
> + case VND_SET_CHECKSUM_LENGTH:
> + put_unaligned_le32(value, &cmd_data_send.buffer[3]);
> + break;
> + default:
> + cmd_data_send.defined_data.report_id = 0;
> + dev_err(&client->dev, "Invalid command: (%d)", cmd);
> + return -EINVAL;
> + }
> +
> + return wdt87xx_set_feature(client, &cmd_data_send.buffer[0],
> + sizeof(cmd_data_send));
> +}
> +
> +static int wdt87xx_write_data(struct i2c_client *client,
> + const char *data, unsigned int address, int length)
> +{
> + unsigned int addr_start, data_len;
> + unsigned short packet_size;
> + int count = 0;
> + int err = 0;
> + union req_data req_data_set;
> + const char *source_data = 0;
> +
> + source_data = data;
> + data_len = length;
> + addr_start = address;
> +
> + /* address and length should be 4 bytes alignment */
> + if ((addr_start & 0x3) != 0 || (data_len & 0x3) != 0) {
> + dev_err(&client->dev, "addr & len must be aligned %x, %x\n",
> + addr_start, data_len);
> + return -EFAULT;
> + }
> +
> + packet_size = PACKET_SIZE;
> +
> + req_data_set.defined_data.report_id = VND_REQ_WRITE;
> + req_data_set.defined_data.type = VND_SET_DATA;
> +
> + while (data_len) {
> + if (data_len < PACKET_SIZE)
> + packet_size = data_len;
> +
> + put_unaligned_le16(packet_size,
> + &req_data_set.defined_data.index);
> + put_unaligned_le32(addr_start,
> + &req_data_set.defined_data.length);
> +
> + memcpy(req_data_set.defined_data.data,
> + source_data, packet_size);
> +
> + err = wdt87xx_set_feature(client, req_data_set.buffer, 64);
> +
> + if (err)
> + break;
> +
> + data_len = data_len - packet_size;
> + source_data = source_data + packet_size;
> + addr_start = addr_start + packet_size;
> +
> + count++;
> +
> + mdelay(4);
> +
> + if ((count % 64) == 0) {
> + count = 0;
> + dev_dbg(&client->dev, "#");
> + }
> + }
> +
> + dev_dbg(&client->dev, "#\n");
> +
> + return err;
> +}
> +
> +static unsigned short misr(unsigned short currentValue,
> + unsigned char newValue)
> +{
> + unsigned int a, b;
> + unsigned int bit0;
> + unsigned int y;
> +
> + a = currentValue;
> + b = newValue;
> + bit0 = a^(b&1);
> + bit0 ^= a>>1;
> + bit0 ^= a>>2;
> + bit0 ^= a>>4;
> + bit0 ^= a>>5;
> + bit0 ^= a>>7;
> + bit0 ^= a>>11;
> + bit0 ^= a>>15;
> + y = (a<<1)^b;
> + y = (y&~1) | (bit0&1);
> +
> + return (unsigned short) y;
I think I might have asked this before, by anyway: are we sure that we
don't already have this checksum implementation in lib/? And if we don't
maybe we should?
> +}
> +
> +static int wdt87xx_get_checksum(struct i2c_client *client,
> + unsigned int *checksum, unsigned int address, int length)
> +{
> + int err = 0;
> + int time_delay = 0;
> + union req_data req_data_get;
> + union cmd_data cmd_data_get;
> +
> + err = wdt87xx_send_command(client, VND_SET_CHECKSUM_LENGTH, length);
> + if (err) {
> + dev_err(&client->dev, "set checksum length fail (%d)\n", err);
> + return err;
> + }
> +
> + err = wdt87xx_send_command(client, VND_SET_CHECKSUM_CALC, address);
> + if (err) {
> + dev_err(&client->dev, "calc checksum fail (%d)\n", err);
> + return err;
> + }
> +
> + time_delay = (length + 1023) / 1024;
> + /* to wait the operation compeletion */
> + msleep(time_delay * 10);
> +
> + cmd_data_get.defined_data.report_id = VND_REQ_READ;
> + cmd_data_get.defined_data.type = VND_GET_CHECKSUM;
> + cmd_data_get.defined_data.index = 0;
> + cmd_data_get.defined_data.length = 0;
> +
> + err = wdt87xx_set_feature(client, cmd_data_get.buffer, 8);
> + if (err) {
> + dev_err(&client->dev, "checksum set read fail (%d)\n", err);
> + return err;
> + }
> +
> + memset(req_data_get.buffer, 0, 64);
> + req_data_get.defined_data.report_id = VND_READ_DATA;
> + err = wdt87xx_get_feature(client, req_data_get.buffer, 64);
> + if (err) {
> + dev_err(&client->dev, "read checksum fail (%d)\n", err);
> + return err;
> + }
> +
> + *checksum = get_unaligned_le16(&req_data_get.buffer[8]);
> +
> + return err;
> +}
> +
> +static unsigned short fw_checksum(const unsigned char *data,
> + unsigned int length)
> +{
> + unsigned int i;
> + unsigned short checksum = 0;
> +
> + checksum = 0x0000;
> +
> + for (i = 0; i < length; i++)
> + checksum = misr(checksum, data[i]);
> +
> + return checksum;
> +}
> +
> +static int wdt87xx_write_firmware(struct i2c_client *client,
> + struct chunk_info_ex *fw_chunk_info, int type)
> +{
> + struct wdt87xx_ts_data *dev_wdt87xx = i2c_get_clientdata(client);
> + int err = 0;
> + int err1 = 0;
> + int size;
> + int start_addr = 0;
> + int page_size;
> + int retry_count = 0;
> + int is_equal = 0;
> + int max_retries;
> + unsigned int calc_checksum = 0;
> + unsigned int read_checksum = 0;
> + const char *data;
> +
> + dev_info(&client->dev, "start 4k page program\n");
> +
> + err = wdt87xx_send_command(client, VND_CMD_STOP, MODE_STOP);
> + if (err) {
> + dev_err(&client->dev, "command stop fail (%d)\n", err);
> + return err;
> + }
> +
> + err = wdt87xx_send_command(client, VND_CMD_SFUNL, 0);
> + if (err) {
> + dev_err(&client->dev, "command sfunl fail (%d)\n", err);
> + goto write_fail;
> + }
> +
> + mdelay(10);
> +
> + start_addr = fw_chunk_info->chunk_info.target_start_addr;
> + size = fw_chunk_info->chunk_info.length;
> + data = fw_chunk_info->data;
> +
> + max_retries = dev_wdt87xx->max_retries;
> +
> + dev_info(&client->dev, "%x, %x, %d\n", start_addr, size, max_retries);
> +
> + while (size && !err) {
> + is_equal = 0;
> + if (size > PG_SIZE) {
> + page_size = PG_SIZE;
> + size = size - PG_SIZE;
> + } else {
> + page_size = size;
> + size = 0;
> + }
> +
> + for (retry_count = 0; retry_count < max_retries && !is_equal;
> + retry_count++) {
> + err = wdt87xx_send_command(client, VND_CMD_ERASE,
> + start_addr);
> + if (err) {
> + dev_err(&client->dev, "erase fail (%d)\n",
> + err);
> + break;
> + }
> +
> + msleep(50);
> +
> + err = wdt87xx_write_data(client, data, start_addr,
> + page_size);
> + if (err) {
> + dev_err(&client->dev, "write data fail (%d)\n",
> + err);
> + break;
> + }
> +
> + read_checksum = 0;
> + err = wdt87xx_get_checksum(client, &read_checksum,
> + start_addr, page_size);
> + if (err)
> + break;
> +
> + calc_checksum = fw_checksum(data, page_size);
> +
> + if (read_checksum == calc_checksum)
> + is_equal = 1;
> + else {
> + dev_err(&client->dev, "checksum fail: (%d)",
> + retry_count);
> + dev_err(&client->dev, ",(%d), (%d)\n",
> + read_checksum, calc_checksum);
Please do not split error messages in 2.
> + }
> + }
> +
> + if (retry_count == MAX_RETRIES) {
> + dev_err(&client->dev, "write page fail\n");
> + err = -EIO;
> + }
> +
> + start_addr = start_addr + page_size;
> + data = data + page_size;
> + dev_info(&client->dev, "%x, %x\n", start_addr, size);
> + }
> +write_fail:
> + err1 = wdt87xx_send_command(client, VND_CMD_SFLCK, 0);
> + if (err1)
> + dev_err(&client->dev, "command sflck fail (%d)\n", err1);
> +
> + mdelay(10);
> +
> + err1 = wdt87xx_send_command(client, VND_CMD_START, 0);
> + if (err1)
> + dev_err(&client->dev, "command start fail (%d)\n", err1);
> +
> + dev_info(&client->dev, "stop 4k page program : ");
> +
> + if (err || err1)
> + dev_info(&client->dev, "fail\n");
> + else
> + dev_info(&client->dev, "pass\n");
> +
> + if (err1)
> + return err1;
> +
> + return err;
> +}
> +
> +static int wdt87xx_sw_reset(struct i2c_client *client)
> +{
> + int err = 0;
> +
> + dev_info(&client->dev, "reset device now\n");
> +
> + err = wdt87xx_send_command(client, VND_CMD_RESET, 0);
> + if (err) {
> + dev_err(&client->dev, "command reset fail (%d)\n", err);
> + return err;
> + }
> +
> + msleep(100);
> +
> + return 0;
> +}
> +
> +static int wdt87xx_load_chunk(struct i2c_client *client,
> + const struct firmware *fw,
> + struct format_chunk *wif_format_chunk, unsigned int ck_id)
> +{
> + int err = 0;
> + struct chunk_info_ex fw_chunk_info;
> +
> + err = get_chunk_info(fw, ck_id, &fw_chunk_info, wif_format_chunk);
> + if (err) {
> + dev_err(&client->dev, "can not get the fw !\n");
> + goto failed;
> + }
> +
> + /* Check for incorrect bin file */
> + err = wdt87xx_check_firmware(&fw_chunk_info, ck_id);
> + if (err) {
> + dev_err(&client->dev, "invalid chunk : (%d)\n", ck_id);
> + goto failed;
> + }
> +
> + err = wdt87xx_write_firmware(client, &fw_chunk_info, ck_id);
> + if (err)
> + dev_err(&client->dev, "write firmware failed : (%d)\n",
> + ck_id);
> +
> +failed:
> + return err;
> +}
> +
> +static int wdt87xx_load_fw(struct device *dev, const char *fn,
> + unsigned char type)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + const struct firmware *fw = 0;
> + int err = 0;
> + struct format_chunk wif_format_chunk;
> +
> + err = request_firmware(&fw, fn, dev);
> + if (err) {
> + dev_err(&client->dev, "unable to open firmware %s\n", fn);
> + return err;
> + }
> +
> + disable_irq(client->irq);
> +
> + err = process_fw_data(client, fw, &wif_format_chunk);
> + if (err) {
> + dev_err(&client->dev, "bad fw file !\n");
> + goto release_firmware;
> + }
> +
> + if (type & WDT87XX_FW) {
> + err = wdt87xx_load_chunk(client, fw, &wif_format_chunk,
> + CHUNK_ID_FRWR);
> + if (err) {
> + dev_err(&client->dev, "load fw chunk failed !\n");
> + goto release_firmware;
> + }
> + }
> +
> + if (type & WDT87XX_CFG) {
> + err = wdt87xx_load_chunk(client, fw, &wif_format_chunk,
> + CHUNK_ID_CNFG);
> + if (err) {
> + dev_err(&client->dev, "load cfg chunk failed !\n");
> + goto release_firmware;
> + }
> + }
> +
> + err = wdt87xx_sw_reset(client);
> +
> + if (err)
> + dev_err(&client->dev, "software reset failed !\n");
> +
> +release_firmware:
> + enable_irq(client->irq);
> +
> + mdelay(10);
> + release_firmware(fw);
> + return err;
> +}
> +
> +static ssize_t wdt87xx_update_fw(struct device *dev,
> + struct device_attribute *attr, const char *buf, size_t count)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct wdt87xx_ts_data *dev_wdt87xx = i2c_get_clientdata(client);
> + int err;
> + unsigned char option = 0;
> +
> + if (count <= 0)
> + return -EINVAL;
> +
> + err = kstrtou8(buf, 0, &option);
> + if (err)
> + return err;
> +
> + dev_info(dev, "update option (%d)\n", option);
> + if (option < 1 || option > 3) {
> + dev_err(&client->dev, "option is not supported\n");
> + return -1;
> + }
> +
> + err = mutex_lock_interruptible(&dev_wdt87xx->sysfs_mutex);
> + if (err)
> + return err;
> +
> + err = wdt87xx_load_fw(dev, WDT87XX_FW_NAME, option);
> + if (err) {
> + dev_err(&client->dev, "the firmware update failed(%d)\n",
> + err);
> + count = err;
> + }
> +
> + mutex_unlock(&dev_wdt87xx->sysfs_mutex);
> +
> + return count;
> +}
> +
> +static ssize_t wdt87xx_fw_id(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct wdt87xx_ts_data *dev_wdt87xx = i2c_get_clientdata(client);
> + struct sys_param *sys_param = &dev_wdt87xx->sys_param;
> + int err;
> +
> + err = mutex_lock_interruptible(&dev_wdt87xx->sysfs_mutex);
> + if (err)
> + return err;
> +
> + wdt87xx_get_sysparam(client, dev_wdt87xx);
Do we expect this to change (unless we flash new config/firmware)?
> +
> + mutex_unlock(&dev_wdt87xx->sysfs_mutex);
> +
> + return scnprintf(buf, PAGE_SIZE, "%x\n", sys_param->fw_id);
> +}
> +
> +static ssize_t wdt87xx_plat_id(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct wdt87xx_ts_data *dev_wdt87xx = i2c_get_clientdata(client);
> + struct sys_param *sys_param = &dev_wdt87xx->sys_param;
> + int err;
> +
> + err = mutex_lock_interruptible(&dev_wdt87xx->sysfs_mutex);
> + if (err)
> + return err;
> +
> + wdt87xx_get_sysparam(client, dev_wdt87xx);
> +
> + mutex_unlock(&dev_wdt87xx->sysfs_mutex);
> +
> + return scnprintf(buf, PAGE_SIZE, "%x\n", sys_param->plat_id);
> +}
> +
> +static ssize_t wdt87xx_xmls_id1(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct wdt87xx_ts_data *dev_wdt87xx = i2c_get_clientdata(client);
> + struct sys_param *sys_param = &dev_wdt87xx->sys_param;
> + int err;
> +
> + err = mutex_lock_interruptible(&dev_wdt87xx->sysfs_mutex);
> + if (err)
> + return err;
> +
> + wdt87xx_get_sysparam(client, dev_wdt87xx);
> +
> + mutex_unlock(&dev_wdt87xx->sysfs_mutex);
> +
> + return scnprintf(buf, PAGE_SIZE, "%x\n", sys_param->xmls_id1);
> +}
> +
> +static ssize_t wdt87xx_xmls_id2(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct wdt87xx_ts_data *dev_wdt87xx = i2c_get_clientdata(client);
> + struct sys_param *sys_param = &dev_wdt87xx->sys_param;
> + int err;
> +
> + err = mutex_lock_interruptible(&dev_wdt87xx->sysfs_mutex);
> + if (err)
> + return err;
> +
> + wdt87xx_get_sysparam(client, dev_wdt87xx);
> +
> + mutex_unlock(&dev_wdt87xx->sysfs_mutex);
> +
> + return scnprintf(buf, PAGE_SIZE, "%x\n", sys_param->xmls_id2);
> +}
> +
> +
> +static DEVICE_ATTR(update_fw, S_IWUSR, NULL, wdt87xx_update_fw);
> +static DEVICE_ATTR(fw_id, S_IRUGO, wdt87xx_fw_id, NULL);
> +static DEVICE_ATTR(plat_id, S_IRUGO, wdt87xx_plat_id, NULL);
> +static DEVICE_ATTR(xmls_id1, S_IRUGO, wdt87xx_xmls_id1, NULL);
> +static DEVICE_ATTR(xmls_id2, S_IRUGO, wdt87xx_xmls_id2, NULL);
> +
> +static struct attribute *wdt87xx_attrs[] = {
> + &dev_attr_update_fw.attr,
> + &dev_attr_fw_id.attr,
> + &dev_attr_plat_id.attr,
> + &dev_attr_xmls_id1.attr,
> + &dev_attr_xmls_id2.attr,
> + NULL
> +};
> +
> +static const struct attribute_group wdt87xx_attr_group = {
> + .attrs = wdt87xx_attrs,
> +};
> +
> +static int wdt87xx_i2c_txrxdata(struct i2c_client *client, char *txdata,
> + int txlen, char *rxdata, int rxlen)
> +{
> + int err;
> +
> + struct i2c_msg msgs[] = {
> + {
> + .addr = client->addr,
> + .flags = 0,
> + .len = txlen,
> + .buf = txdata,
> + },
> + {
> + .addr = client->addr,
> + .flags = I2C_M_RD,
> + .len = rxlen,
> + .buf = rxdata,
> + },
> + };
> +
> + err = i2c_transfer(client->adapter, msgs, 2);
> +
> + if (err < 0)
> + dev_err(&client->dev, "%s: i2c read error (%d)\n",
> + __func__, err);
> +
> + return err < 0 ? err : (err != ARRAY_SIZE(msgs) ? -EIO : 0);
> +}
> +
> +static int wdt87xx_i2c_rxdata(struct i2c_client *client, char *rxdata,
> + int length)
> +{
> + int err;
> +
> + err = i2c_master_recv(client, rxdata, length);
> +
> + if (err < 0)
> + dev_err(&client->dev, "%s: i2c read error (%d)\n",
> + __func__, err);
> +
> + return err;
> +}
> +
> +static int wdt87xx_i2c_txdata(struct i2c_client *client, char *txdata,
> + int length)
> +{
> + int err;
> +
> + err = i2c_master_send(client, txdata, length);
> + if (err < 0)
> + dev_err(&client->dev, "%s: i2c write error (%d)\n",
> + __func__, err);
> +
> + return err;
> +}
> +
> +static irqreturn_t wdt87xx_ts_interrupt(int irq, void *dev_id)
> +{
> + struct wdt87xx_ts_data *dev_wdt87xx =
> + (struct wdt87xx_ts_data *) dev_id;
> + int err;
> + int i, points;
> + struct i2c_client *client = dev_wdt87xx->client;
> + u8 raw_buf[64] = {0};
> + u8 *ptr_raw_buf = 0;
> +
> + err = wdt87xx_i2c_rxdata(client, raw_buf, WDT_RAW_BUF_COUNT);
> +
> + if (err < 0) {
> + dev_err(&client->dev, "read raw data fail (%d)\n", err);
> + goto leave_irq;
> + }
> +
> + /* touch finger count */
> + points = raw_buf[TOUCH_PK_OFFSET_FNGR_NUM];
> +
> + dev_dbg(&client->dev, "point: (%d)\n", points);
> +
> + if (points == 0) {
> + for (i = 0; i < WDT_MAX_POINT; i++) {
> + /* force to send event of tip off */
> + if (dev_wdt87xx->finger_last_flag[i] != 0) {
> + dev_dbg(&client->dev, "tip off (%d)\n", i);
> + input_mt_slot(dev_wdt87xx->input_dev, i);
> + input_mt_report_slot_state(
> + dev_wdt87xx->input_dev,
> + MT_TOOL_FINGER, false);
> + }
> + }
> +
> + memset(dev_wdt87xx->finger_last_flag, 0, WDT_MAX_POINT<<1);
> +
> + input_mt_sync_frame(dev_wdt87xx->input_dev);
> + input_sync(dev_wdt87xx->input_dev);
> + goto leave_irq;
> + }
> +
> + dev_dbg(&client->dev, "+++++++++\n");
> +
> + ptr_raw_buf = &raw_buf[TOUCH_PK_OFFSET_EVENT];
> + for (i = 0; i < WDT_MAX_POINT; i++) {
> + int point_id = (*ptr_raw_buf >> 3) - 1;
> +
> + if (point_id < 0)
> + continue;
So if we get point_id < 0 in the first event block we'll skip all the
rest since "continue" would not advance ptr_raw_buf. If that was
intended then "break" would be more appropriate.
Can you tell me a bit more about the way device sends touch data? Does
it always send all 10 contacts regardless of data in
raw_buf[TOUCH_PK_OFFSET_FNGR_NUM]?
> +
> + /* tip off */
> + if (((*ptr_raw_buf & 0x1) == 0) &&
> + (dev_wdt87xx->finger_last_flag[point_id] != 0)) {
> + dev_dbg(&client->dev, "tip on (%d)\n", point_id);
> + input_mt_slot(dev_wdt87xx->input_dev, point_id);
> + input_mt_report_slot_state(dev_wdt87xx->input_dev,
> + MT_TOOL_FINGER, false);
If you are using INPUT_MT_DROP_UNUSED then I don't think you should
explicitly release slots here and above.
> + } else /* tip on */
> + if (*ptr_raw_buf & 0x1) {
> + unsigned int point_x, point_y;
> +
> + point_x = get_unaligned_le16(ptr_raw_buf +
> + FINGER_EV_OFFSET_X);
> + point_y = get_unaligned_le16(ptr_raw_buf +
> + FINGER_EV_OFFSET_Y);
> +
> + /* incorrect coordinate */
> + if (point_x > 0x7FFF || point_y > 0x7FFF)
> + continue;
> +
> + dev_dbg(&client->dev, "tip on (%d), x(%d), y(%d)\n",
> + i, point_x, point_y);
> +
> + input_mt_slot(dev_wdt87xx->input_dev, point_id);
> + input_mt_report_slot_state(dev_wdt87xx->input_dev,
> + MT_TOOL_FINGER, true);
> + input_report_abs(dev_wdt87xx->input_dev,
> + ABS_MT_TOUCH_MAJOR, 1);
> + input_report_abs(dev_wdt87xx->input_dev,
> + ABS_MT_POSITION_X, point_x);
> + input_report_abs(dev_wdt87xx->input_dev,
> + ABS_MT_POSITION_Y, point_y);
> + }
> + dev_wdt87xx->finger_last_flag[point_id] = (*ptr_raw_buf & 0x1);
> + ptr_raw_buf += FINGER_EV_SIZE;
> + }
> +
> + input_mt_sync_frame(dev_wdt87xx->input_dev);
> + input_sync(dev_wdt87xx->input_dev);
> +
> +leave_irq:
> + return IRQ_HANDLED;
> +}
> +
> +
> +static int wdt87xx_ts_request_irq(struct i2c_client *client)
> +{
> + int err = 0;
> + struct wdt87xx_ts_data *dev_wdt87xx;
> +
> + dev_wdt87xx = i2c_get_clientdata(client);
> +
> + err = request_threaded_irq(client->irq, NULL, wdt87xx_ts_interrupt,
> + IRQF_ONESHOT, client->name, dev_wdt87xx);
> +
> + if (err < 0) {
> + dev_err(&client->dev, "%s: request threaded irq fail (%d)\n",
> + __func__, err);
> + return err;
> + }
> +
> + disable_irq_nosync(client->irq);
This is still racy as far as I can see. You can get interrupt
immediately after requesting it and input device has not been allocated
yet. Please allocate it first, then request IRQ, then register it. By
the way, consider using devm_request_threaded_irq and
devm_input_allocate_device.
> +
> + return 0;
> +}
> +
> +static int wdt87xx_ts_create_input_device(struct i2c_client *client)
> +{
> + int err = 0;
> + struct wdt87xx_ts_data *dev_wdt87xx;
> + struct input_dev *input_dev;
> +
> + dev_wdt87xx = (struct wdt87xx_ts_data *) i2c_get_clientdata(client);
> +
> + input_dev = input_allocate_device();
> + if (!input_dev) {
> + dev_err(&client->dev, "%s: failed to allocate input device\n",
> + __func__);
> + return -ENOMEM;
> + }
> +
> + dev_wdt87xx->input_dev = input_dev;
> +
> + input_dev->name = "WDT87xx Touchscreen";
> + input_dev->id.bustype = BUS_I2C;
> +
> + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
> +
> + /* for single touch */
> + set_bit(ABS_X, input_dev->absbit);
> + set_bit(ABS_Y, input_dev->absbit);
> + input_set_abs_params(input_dev, ABS_X, 0, SCREEN_LOGICAL_MAX_X, 0, 0);
> + input_set_abs_params(input_dev, ABS_Y, 0, SCREEN_LOGICAL_MAX_Y, 0, 0);
> + input_abs_set_res(input_dev, ABS_X, WDT_UNITS_PER_MM);
> + input_abs_set_res(input_dev, ABS_Y, WDT_UNITS_PER_MM);
> +
> + input_mt_init_slots(input_dev, WDT_MAX_POINT,
> + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
> +
> + set_bit(ABS_MT_TOUCH_MAJOR, input_dev->absbit);
> + set_bit(ABS_MT_POSITION_X, input_dev->absbit);
> + set_bit(ABS_MT_POSITION_Y, input_dev->absbit);
> + set_bit(ABS_MT_WIDTH_MAJOR, input_dev->absbit);
> +
> + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0,
> + SCREEN_LOGICAL_MAX_X, 0, 0);
> + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0,
> + SCREEN_LOGICAL_MAX_Y, 0, 0);
> + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 0xFF, 0, 0);
> + input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, 200, 0, 0);
> + input_abs_set_res(input_dev, ABS_MT_POSITION_X, WDT_UNITS_PER_MM);
> + input_abs_set_res(input_dev, ABS_MT_POSITION_Y, WDT_UNITS_PER_MM);
> +
> + set_bit(ABS_PRESSURE, input_dev->absbit);
> + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xFF, 0, 0);
Your device does not appear to report pressure so do not declare it in
capabilities.
> +
> + input_set_abs_params(input_dev, ABS_MT_TRACKING_ID, 0,
> + WDT_MAX_POINT, 0, 0);
> +
> + set_bit(EV_ABS, input_dev->evbit);
> + set_bit(EV_SYN, input_dev->evbit);
> +
> + err = input_register_device(input_dev);
> + if (err) {
> + dev_err(&client->dev, "register input device fail (%d)\n",
> + err);
> + input_free_device(input_dev);
> + dev_wdt87xx->input_dev = 0;
> + return err;
> + }
> +
> + return 0;
> +}
> +
> +static int wdt87xx_ts_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct wdt87xx_ts_data *dev_wdt87xx;
> + int err = 0;
> +
> + dev_dbg(&client->dev, "wdt87xx : adapter=(%d), client irq:(%d)\n",
> + client->adapter->nr, client->irq);
> +
> + /* check if the I2C function is ok in this adaptor */
> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
> + return -ENODEV;
> +
> + dev_dbg(&client->dev, "kzalloc\n");
> + dev_wdt87xx = devm_kzalloc(&client->dev,
> + sizeof(struct wdt87xx_ts_data), GFP_KERNEL);
> + if (!dev_wdt87xx) {
> + err = -ENOMEM;
> + goto exit_alloc_data_fail;
> + }
> +
> + dev_dbg(&client->dev, "i2c_set_clientdata\n");
> +
> + dev_wdt87xx->client = client;
> + mutex_init(&dev_wdt87xx->sysfs_mutex);
> + i2c_set_clientdata(client, dev_wdt87xx);
> + dev_wdt87xx->max_retries = MAX_RETRIES;
> +
> + dev_dbg(&client->dev, "wdt87xx_ts_request_irq\n");
> + err = wdt87xx_ts_request_irq(client);
> + if (err < 0) {
> + dev_err(&client->dev, "request irq fail (%d)\n", err);
> + goto exit_irq_request;
> + }
> +
> + dev_dbg(&client->dev, "wdt87xx_ts_create_input_device\n");
> + err = wdt87xx_ts_create_input_device(client);
> + if (err < 0) {
> + dev_err(&client->dev, "create input device fail (%d)\n", err);
> + goto exit_create_input_device;
> + }
> +
> + dev_dbg(&client->dev, "sysfs_create_group\n");
> + err = sysfs_create_group(&client->dev.kobj, &wdt87xx_attr_group);
> + if (err) {
> + dev_err(&client->dev, "create sysfs fail (%d)\n", err);
> + goto exit_sysfs_group;
> + }
> +
> + enable_irq(client->irq);
> +
> + dev_dbg(&client->dev, "%s leave\n", __func__);
> +
> + return 0;
> +
> +exit_sysfs_group:
> + if (dev_wdt87xx->input_dev)
> + input_unregister_device(dev_wdt87xx->input_dev);
> +exit_create_input_device:
> + if (client->irq)
> + free_irq(client->irq, dev_wdt87xx);
> +exit_irq_request:
> +exit_alloc_data_fail:
> + return err;
> +}
> +
> +static int wdt87xx_ts_remove(struct i2c_client *client)
> +{
> + struct wdt87xx_ts_data *dev_wdt87xx =
> + (struct wdt87xx_ts_data *) i2c_get_clientdata(client);
> +
> + dev_dbg(&client->dev, "==%s==\n", __func__);
> +
> + sysfs_remove_group(&client->dev.kobj, &wdt87xx_attr_group);
> +
> + if (client->irq)
This check is not needed.
> + free_irq(client->irq, dev_wdt87xx);
> +
> + if (dev_wdt87xx->input_dev)
This check is not needed.
> + input_unregister_device(dev_wdt87xx->input_dev);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused wdt87xx_suspend(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + int err = 0;
> +
> + dev_dbg(&client->dev, "enter %s\n", __func__);
> +
> + disable_irq(client->irq);
> +
> + err = wdt87xx_send_command(client, VND_CMD_STOP, MODE_IDLE);
> + if (err)
> + dev_err(&client->dev, "%s: command stop fail (%d)\n",
> + __func__, err);
> +
> + return err;
> +}
> +
> +static int __maybe_unused wdt87xx_resume(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + int err = 0;
> +
> + /* once the chip is reset before resume, */
> + /* we need some time to wait it is stable */
> + mdelay(100);
> +
> + err = wdt87xx_send_command(client, VND_CMD_START, 0);
> + if (err)
> + dev_err(&client->dev, "%s: command start fail (%d)\n",
> + __func__, err);
> +
> + enable_irq(client->irq);
> +
> + dev_dbg(&client->dev, "leave %s\n", __func__);
> +
> + return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(wdt87xx_pm_ops, wdt87xx_suspend, wdt87xx_resume);
> +
> +static const struct i2c_device_id wdt87xx_dev_id[] = {
> + { WDT87XX_NAME, 0 },
> + { }
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, wdt87xx_dev_id);
> +
> +static const struct acpi_device_id wdt87xx_acpi_id[] = {
> + { "WDHT0001", 0 },
> + { }
> +};
> +
> +MODULE_DEVICE_TABLE(acpi, wdt87xx_acpi_id);
> +
> +static struct i2c_driver wdt87xx_driver = {
> + .probe = wdt87xx_ts_probe,
> + .remove = wdt87xx_ts_remove,
> + .id_table = wdt87xx_dev_id,
> + .driver = {
> + .name = WDT87XX_NAME,
> + .owner = THIS_MODULE,
> + .pm = &wdt87xx_pm_ops,
> + .acpi_match_table = ACPI_PTR(wdt87xx_acpi_id),
> + },
> +};
> +
> +module_i2c_driver(wdt87xx_driver);
> +
> +MODULE_AUTHOR("HN Chen <hn.chen@xxxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("WeidaHiTech WDT87XX Touchscreen driver");
> +MODULE_VERSION(WDT87XX_DRV_VER);
> +MODULE_LICENSE("GPL");
> +
> --
> 1.9.1
>
Thanks.
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
