Re: [PATCH] input: eglx_ts, remove irq trigger flags

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 12, 2015 at 09:28:13AM -0700, Dmitry Torokhov wrote:
> On Thu, Mar 12, 2015 at 04:37:01PM +0100, Markus Pargmann wrote:
> > Hi,
> > 
> > On Thu, Mar 12, 2015 at 04:18:03PM +0100, Philipp Zabel wrote:
> > > Hi Markus,
> > > 
> > > Am Donnerstag, den 12.03.2015, 15:50 +0100 schrieb Markus Pargmann:
> > > > The trigger settings for a given irq are parsed from DT. Defining them
> > > > as flag for devm_request_threaded_irq() overwrites these settings. This
> > > > results in wrong trigger settings for boards which have different irq
> > > > triggers.
> > > > 
> > > > Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
> > > > ---
> > > >  drivers/input/touchscreen/egalax_ts.c | 2 +-
> > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > > 
> > > > diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c
> > > > index 4c56299284ef..b0e6448b743c 100644
> > > > --- a/drivers/input/touchscreen/egalax_ts.c
> > > > +++ b/drivers/input/touchscreen/egalax_ts.c
> > > > @@ -218,7 +218,7 @@ static int egalax_ts_probe(struct i2c_client *client,
> > > >  
> > > >  	error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
> > > >  					  egalax_ts_interrupt,
> > > > -					  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
> > > > +					  IRQF_ONESHOT,
> > > >  					  "egalax_ts", ts);
> > > >  	if (error < 0) {
> > > >  		dev_err(&client->dev, "Failed to register interrupt\n");
> > > 
> > > There are three device trees which have eeti,egalax_ts nodes with
> > > interrupt flags 0:
> > > 
> > > arch/arm/boot/dts/imx53-tx53-x13x.dts (twice),
> > > arch/arm/boot/dts/imx6dl-tx6u-811x.dts, and
> > > arch/arm/boot/dts/imx6q-tx6q-1110.dts.
> > > 
> > > Will these still work after this change?
> > 
> > Oh right, thanks, these should be fixed as well.
> 
> If by fixing you mean changing DTS I do not think we can do that. Maybe
> the driver should check if there is non-empty trigger flags in the
> interrupt description and fall back to IRQF_TRIGGER_LOW if they are
> absent.

I think this is more of a driver/dts bug. The devicetree binding
documentation for the egalax_ts [1] does not describe the interrupts
flags that should be set or that the flag should be 0. Even the example
shows the interrupt flags being '2'(trigger high-to-low edge). These
flags are described by the interrupt-controller. The generic
interrupt-controller bindings describe the second parameter for
interrupts as interrupt trigger flags [2].

So I think having a '0' as second parameter in the 'interrupts' field is a
wrong representation of the actual hardware. This of course works as
long as the driver ignores the trigger settings from DT which is not
specified in the bindings.

Best Regards,

Markus


[1] Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
[2] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux