Hi Thomas,
On Thu, Jan 29, 2015 at 05:22:50PM +0100, Thomas Sanchez wrote:
> This commit introduces a new driver for Foxconn CNTouch trackpad that
> can be found on LDLC's laptop IRIS family. The driver has been inspired
> from usbmouse.c.
So I guess it does not work as a standard HID device, does it?
>
> Signed-off-by: Thomas Sanchez <thomas.sanchz@xxxxxxxxx>
> ---
> drivers/input/mouse/Kconfig | 11 ++
> drivers/input/mouse/Makefile | 1 +
> drivers/input/mouse/foxconn_usb.c | 206 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 218 insertions(+)
> create mode 100644 drivers/input/mouse/foxconn_usb.c
>
> diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
> index d8b46b0..3ccb924 100644
> --- a/drivers/input/mouse/Kconfig
> +++ b/drivers/input/mouse/Kconfig
> @@ -403,4 +403,15 @@ config MOUSE_NAVPOINT_PXA27x
> To compile this driver as a module, choose M here: the
> module will be called navpoint.
>
> +config MOUSE_FOXCONN_CNTOUCH
> + tristate "Foxconn CNTouch USB device support"
> + depends on USB_ARCH_HAS_HCD
> + select USB
> + help
> + This driver adds support for the Foxconn CNTouch trackpad present for
> + instance on IRIS laptop family from LDLC.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called foxconn_usb.
> +
> endif
> diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
> index 560003d..4bfcc75 100644
> --- a/drivers/input/mouse/Makefile
> +++ b/drivers/input/mouse/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_MOUSE_ATARI) += atarimouse.o
> obj-$(CONFIG_MOUSE_BCM5974) += bcm5974.o
> obj-$(CONFIG_MOUSE_CYAPA) += cyapa.o
> obj-$(CONFIG_MOUSE_ELAN_I2C) += elan_i2c.o
> +obj-$(CONFIG_MOUSE_FOXCONN_CNTOUCH) += foxconn_usb.o
> obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o
> obj-$(CONFIG_MOUSE_INPORT) += inport.o
> obj-$(CONFIG_MOUSE_LOGIBM) += logibm.o
> diff --git a/drivers/input/mouse/foxconn_usb.c b/drivers/input/mouse/foxconn_usb.c
> new file mode 100644
> index 0000000..d05d03e
> --- /dev/null
> +++ b/drivers/input/mouse/foxconn_usb.c
> @@ -0,0 +1,206 @@
It is customary to put copyright notice and license at the beginning of
the file.
> +#include <linux/kernel.h>
> +#include <linux/errno.h>
> +#include <linux/slab.h>
> +#include <linux/module.h>
> +#include <linux/usb.h>
> +#include <linux/usb/input.h>
> +
> +#define USB_VENDOR_ID_FOXCONN 0x294e
> +#define USB_DEVICE_ID_FOXCONN_CNTOUCH 0x1001
> +
> +#define DRIVER_DESC "CNTouch USB Driver"
> +
> +static const struct usb_device_id cntouch_devices[] = {
> + {USB_DEVICE(USB_VENDOR_ID_FOXCONN, USB_DEVICE_ID_FOXCONN_CNTOUCH)},
> + {},
> +};
> +
> +MODULE_AUTHOR("Thomas Sanchez, thomas.sanchz@xxxxxxxxx");
> +MODULE_DESCRIPTION(DRIVER_DESC);
> +MODULE_LICENSE("GPL");
> +
> +MODULE_DEVICE_TABLE(usb, cntouch_devices);
> +
> +struct cntouch_device {
> + struct usb_device *usb_dev;
> + struct input_dev *input_dev;
> + struct urb *irq;
> + signed char *data;
> + dma_addr_t data_dma;
> + char usb_path[64];
> +};
> +
> +static void cntouch_irq(struct urb *urb)
> +{
> + struct cntouch_device *cn_dev = urb->context;
> + signed char *data = cn_dev->data;
> + struct input_dev *dev = cn_dev->input_dev;
> + int status;
> +
> + switch (urb->status) {
> + case 0:
> + break;
> + case -ECONNRESET:
> + case -ENOENT:
> + case -ESHUTDOWN:
> + return;
> + default:
> + goto resubmit;
> + }
> +
> + input_report_key(dev, BTN_LEFT, data[0] & 0x01);
> + input_report_key(dev, BTN_RIGHT, data[0] & 0x02);
> +
> + /*
> + * when scrolling horizontally with two fingers, data[4] is used but I
> + * did not find the right mapping...
> + */
> + input_report_key(dev, BTN_TOOL_FINGER, data[4] == 0 ? 1 : 2);
Value of 2 does not make sense to use with input_report_key() as it
converts the value into boolean anyway. Also BTN_TOOL_FINGER should be
used by trackapds/touchpads working in absolute mode while this device
seems to be using relative mode.
By the way, we have REL_HWHEEL event for reporting horizontal scrolling.
> +
> + input_report_rel(dev, REL_X, data[1]);
> + input_report_rel(dev, REL_Y, data[2]);
> +
> + input_report_rel(dev, REL_WHEEL, data[3]);
> +
> + input_sync(dev);
> +
> +resubmit:
> + status = usb_submit_urb(urb, GFP_ATOMIC);
> + if (status) {
> + dev_err(&cn_dev->usb_dev->dev,
> + "can't resubmit intr, %s-%s/input0, status %d\n",
> + cn_dev->usb_dev->bus->bus_name,
> + cn_dev->usb_dev->devpath, status);
> + }
> +}
> +
> +static int cntouch_open(struct input_dev *dev)
> +{
> + struct cntouch_device *cn_dev = input_get_drvdata(dev);
> +
> + cn_dev->irq->dev = cn_dev->usb_dev;
I do not think you need to do this assignment anymore.
> + if (usb_submit_urb(cn_dev->irq, GFP_KERNEL))
> + return -EIO;
> + return 0;
> +}
> +
> +static void cntouch_close(struct input_dev *dev)
> +{
> + struct cntouch_device *cn_dev = input_get_drvdata(dev);
> +
> + usb_kill_urb(cn_dev->irq);
> +}
> +
> +static int cntouch_probe(struct usb_interface *interface,
> + const struct usb_device_id *id)
> +{
> + struct usb_device *usb_dev = interface_to_usbdev(interface);
> + struct cntouch_device *cn_dev = NULL;
Please do not initialize variables unless you actually need the initial
value. This gives the compiler chance to warn you about "using
uninitialized variable" code paths instead of happily using
NULL/0/whatever initial value you set and running into problems at
runtime.
> + struct usb_host_interface *host_interface;
> + struct usb_endpoint_descriptor *endpoint;
> + int pipe, maxp;
> + int error = -ENOMEM;
Same here.
> +
> + host_interface = interface->cur_altsetting;
> +
> + if (host_interface->desc.bNumEndpoints != 1)
> + return -ENODEV;
> +
> + endpoint = &host_interface->endpoint[0].desc;
> + if (!usb_endpoint_is_int_in(endpoint))
> + return -ENODEV;
> +
> + pipe = usb_rcvintpipe(usb_dev, endpoint->bEndpointAddress);
> + maxp = usb_maxpacket(usb_dev, pipe, usb_pipeout(pipe));
> +
> + cn_dev = kzalloc(sizeof(*cn_dev), GFP_KERNEL);
> + if (cn_dev == NULL)
> + goto err_1;
> +
> + cn_dev->input_dev = input_allocate_device();
> + if (!cn_dev->input_dev)
> + goto err_2;
> +
> + cn_dev->usb_dev = usb_get_dev(usb_dev);
This is not needed: while driver is bound to the device it is not going
anywhere.
> +
> + cn_dev->data =
> + usb_alloc_coherent(usb_dev, 8, GFP_ATOMIC, &cn_dev->data_dma);
> + if (!cn_dev->data)
> + goto err_3;
> +
> + cn_dev->irq = usb_alloc_urb(0, GFP_KERNEL);
> + if (!cn_dev->irq)
> + goto err_4;
> +
> + usb_set_intfdata(interface, cn_dev);
> +
> + usb_make_path(usb_dev, cn_dev->usb_path, sizeof(cn_dev->usb_path));
> + strlcat(cn_dev->usb_path, "/input0", sizeof(cn_dev->usb_path));
> +
> + cn_dev->input_dev->name = "CNTouch";
> + cn_dev->input_dev->phys = cn_dev->usb_path;
> + usb_to_input_id(usb_dev, &cn_dev->input_dev->id);
> + cn_dev->input_dev->dev.parent = &interface->dev;
> +
> + cn_dev->input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
> + cn_dev->input_dev->keybit[BIT_WORD(BTN_MOUSE)] =
> + BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
> + cn_dev->input_dev->relbit[0] =
> + BIT_MASK(REL_X) | BIT_MASK(REL_Y) | BIT_MASK(REL_WHEEL);
> +
> + input_set_drvdata(cn_dev->input_dev, cn_dev);
> +
> + cn_dev->input_dev->open = cntouch_open;
> + cn_dev->input_dev->close = cntouch_close;
> +
> + usb_fill_int_urb(cn_dev->irq, usb_dev, pipe, cn_dev->data,
> + (maxp > 8 ? 8 : maxp), cntouch_irq, cn_dev,
> + endpoint->bInterval);
> + cn_dev->irq->transfer_dma = cn_dev->data_dma;
> + cn_dev->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
> +
> + error = input_register_device(cn_dev->input_dev);
> + if (error)
> + goto err_5;
> +
> + dev_info(&interface->dev, DRIVER_DESC "device now attached\n");
Please drop this message, we are already noisy enough. Input core will
message when new input device is created anyway.
> + return 0;
> +
> +err_5:
> + usb_free_urb(cn_dev->irq);
> +err_4:
> + usb_free_coherent(usb_dev, 8, cn_dev->data, cn_dev->data_dma);
> +err_3:
> + input_free_device(cn_dev->input_dev);
> +err_2:
> + usb_set_intfdata(interface, NULL);
> + usb_put_dev(cn_dev->usb_dev);
> + kfree(cn_dev);
> +err_1:
> + dev_err(&interface->dev, "out of memory\n");
Maybe. Or maybe not. We do not know why input_register_device() failed.
Just drop the message, driver core will complain about error binding the
driver anyway.
> + return error;
> +}
> +
> +static void cntouch_disconnect(struct usb_interface *interface)
> +{
> + struct cntouch_device *cn_dev = usb_get_intfdata(interface);
> +
> + usb_kill_urb(cn_dev->irq);
Not needed as close() will be called as part of input device
unregistration and will cancel the urb for us.
> + input_unregister_device(cn_dev->input_dev);
> + usb_free_urb(cn_dev->irq);
> + usb_free_coherent(cn_dev->usb_dev, 8, cn_dev->data, cn_dev->data_dma);
> + usb_set_intfdata(interface, NULL);
> + usb_put_dev(cn_dev->usb_dev);
> + input_free_device(cn_dev->input_dev);
This is wrong - once input device has been registered you only need to
call unregister: once last reference to the object is dropped it will be
freed by input core.
> + kfree(cn_dev);
> + dev_info(&interface->dev, DRIVER_DESC " now disconnected\n");
Please drop this message as well.
> +}
> +
> +static struct usb_driver cntouch_driver = {
> + .name = "CNTouch",
> + .probe = &cntouch_probe,
> + .disconnect = &cntouch_disconnect,
> + .id_table = cntouch_devices,
> +};
> +
> +module_usb_driver(cntouch_driver);
> --
> 2.1.0
>
Thanks.
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
