This commit introduces a new driver for Foxconn CNTouch trackpad that
can be found on LDLC's laptop IRIS family. The driver has been inspired
from usbmouse.c.
Signed-off-by: Thomas Sanchez <thomas.sanchz@xxxxxxxxx>
---
drivers/input/mouse/Kconfig | 11 ++
drivers/input/mouse/Makefile | 1 +
drivers/input/mouse/foxconn_usb.c | 206 ++++++++++++++++++++++++++++++++++++++
3 files changed, 218 insertions(+)
create mode 100644 drivers/input/mouse/foxconn_usb.c
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index d8b46b0..3ccb924 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -403,4 +403,15 @@ config MOUSE_NAVPOINT_PXA27x
To compile this driver as a module, choose M here: the
module will be called navpoint.
+config MOUSE_FOXCONN_CNTOUCH
+ tristate "Foxconn CNTouch USB device support"
+ depends on USB_ARCH_HAS_HCD
+ select USB
+ help
+ This driver adds support for the Foxconn CNTouch trackpad present for
+ instance on IRIS laptop family from LDLC.
+
+ To compile this driver as a module, choose M here: the
+ module will be called foxconn_usb.
+
endif
diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index 560003d..4bfcc75 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_MOUSE_ATARI) += atarimouse.o
obj-$(CONFIG_MOUSE_BCM5974) += bcm5974.o
obj-$(CONFIG_MOUSE_CYAPA) += cyapa.o
obj-$(CONFIG_MOUSE_ELAN_I2C) += elan_i2c.o
+obj-$(CONFIG_MOUSE_FOXCONN_CNTOUCH) += foxconn_usb.o
obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o
obj-$(CONFIG_MOUSE_INPORT) += inport.o
obj-$(CONFIG_MOUSE_LOGIBM) += logibm.o
diff --git a/drivers/input/mouse/foxconn_usb.c b/drivers/input/mouse/foxconn_usb.c
new file mode 100644
index 0000000..d05d03e
--- /dev/null
+++ b/drivers/input/mouse/foxconn_usb.c
@@ -0,0 +1,206 @@
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+
+#define USB_VENDOR_ID_FOXCONN 0x294e
+#define USB_DEVICE_ID_FOXCONN_CNTOUCH 0x1001
+
+#define DRIVER_DESC "CNTouch USB Driver"
+
+static const struct usb_device_id cntouch_devices[] = {
+ {USB_DEVICE(USB_VENDOR_ID_FOXCONN, USB_DEVICE_ID_FOXCONN_CNTOUCH)},
+ {},
+};
+
+MODULE_AUTHOR("Thomas Sanchez, thomas.sanchz@xxxxxxxxx");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+MODULE_DEVICE_TABLE(usb, cntouch_devices);
+
+struct cntouch_device {
+ struct usb_device *usb_dev;
+ struct input_dev *input_dev;
+ struct urb *irq;
+ signed char *data;
+ dma_addr_t data_dma;
+ char usb_path[64];
+};
+
+static void cntouch_irq(struct urb *urb)
+{
+ struct cntouch_device *cn_dev = urb->context;
+ signed char *data = cn_dev->data;
+ struct input_dev *dev = cn_dev->input_dev;
+ int status;
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ return;
+ default:
+ goto resubmit;
+ }
+
+ input_report_key(dev, BTN_LEFT, data[0] & 0x01);
+ input_report_key(dev, BTN_RIGHT, data[0] & 0x02);
+
+ /*
+ * when scrolling horizontally with two fingers, data[4] is used but I
+ * did not find the right mapping...
+ */
+ input_report_key(dev, BTN_TOOL_FINGER, data[4] == 0 ? 1 : 2);
+
+ input_report_rel(dev, REL_X, data[1]);
+ input_report_rel(dev, REL_Y, data[2]);
+
+ input_report_rel(dev, REL_WHEEL, data[3]);
+
+ input_sync(dev);
+
+resubmit:
+ status = usb_submit_urb(urb, GFP_ATOMIC);
+ if (status) {
+ dev_err(&cn_dev->usb_dev->dev,
+ "can't resubmit intr, %s-%s/input0, status %d\n",
+ cn_dev->usb_dev->bus->bus_name,
+ cn_dev->usb_dev->devpath, status);
+ }
+}
+
+static int cntouch_open(struct input_dev *dev)
+{
+ struct cntouch_device *cn_dev = input_get_drvdata(dev);
+
+ cn_dev->irq->dev = cn_dev->usb_dev;
+ if (usb_submit_urb(cn_dev->irq, GFP_KERNEL))
+ return -EIO;
+ return 0;
+}
+
+static void cntouch_close(struct input_dev *dev)
+{
+ struct cntouch_device *cn_dev = input_get_drvdata(dev);
+
+ usb_kill_urb(cn_dev->irq);
+}
+
+static int cntouch_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *usb_dev = interface_to_usbdev(interface);
+ struct cntouch_device *cn_dev = NULL;
+ struct usb_host_interface *host_interface;
+ struct usb_endpoint_descriptor *endpoint;
+ int pipe, maxp;
+ int error = -ENOMEM;
+
+ host_interface = interface->cur_altsetting;
+
+ if (host_interface->desc.bNumEndpoints != 1)
+ return -ENODEV;
+
+ endpoint = &host_interface->endpoint[0].desc;
+ if (!usb_endpoint_is_int_in(endpoint))
+ return -ENODEV;
+
+ pipe = usb_rcvintpipe(usb_dev, endpoint->bEndpointAddress);
+ maxp = usb_maxpacket(usb_dev, pipe, usb_pipeout(pipe));
+
+ cn_dev = kzalloc(sizeof(*cn_dev), GFP_KERNEL);
+ if (cn_dev == NULL)
+ goto err_1;
+
+ cn_dev->input_dev = input_allocate_device();
+ if (!cn_dev->input_dev)
+ goto err_2;
+
+ cn_dev->usb_dev = usb_get_dev(usb_dev);
+
+ cn_dev->data =
+ usb_alloc_coherent(usb_dev, 8, GFP_ATOMIC, &cn_dev->data_dma);
+ if (!cn_dev->data)
+ goto err_3;
+
+ cn_dev->irq = usb_alloc_urb(0, GFP_KERNEL);
+ if (!cn_dev->irq)
+ goto err_4;
+
+ usb_set_intfdata(interface, cn_dev);
+
+ usb_make_path(usb_dev, cn_dev->usb_path, sizeof(cn_dev->usb_path));
+ strlcat(cn_dev->usb_path, "/input0", sizeof(cn_dev->usb_path));
+
+ cn_dev->input_dev->name = "CNTouch";
+ cn_dev->input_dev->phys = cn_dev->usb_path;
+ usb_to_input_id(usb_dev, &cn_dev->input_dev->id);
+ cn_dev->input_dev->dev.parent = &interface->dev;
+
+ cn_dev->input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
+ cn_dev->input_dev->keybit[BIT_WORD(BTN_MOUSE)] =
+ BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
+ cn_dev->input_dev->relbit[0] =
+ BIT_MASK(REL_X) | BIT_MASK(REL_Y) | BIT_MASK(REL_WHEEL);
+
+ input_set_drvdata(cn_dev->input_dev, cn_dev);
+
+ cn_dev->input_dev->open = cntouch_open;
+ cn_dev->input_dev->close = cntouch_close;
+
+ usb_fill_int_urb(cn_dev->irq, usb_dev, pipe, cn_dev->data,
+ (maxp > 8 ? 8 : maxp), cntouch_irq, cn_dev,
+ endpoint->bInterval);
+ cn_dev->irq->transfer_dma = cn_dev->data_dma;
+ cn_dev->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ error = input_register_device(cn_dev->input_dev);
+ if (error)
+ goto err_5;
+
+ dev_info(&interface->dev, DRIVER_DESC "device now attached\n");
+ return 0;
+
+err_5:
+ usb_free_urb(cn_dev->irq);
+err_4:
+ usb_free_coherent(usb_dev, 8, cn_dev->data, cn_dev->data_dma);
+err_3:
+ input_free_device(cn_dev->input_dev);
+err_2:
+ usb_set_intfdata(interface, NULL);
+ usb_put_dev(cn_dev->usb_dev);
+ kfree(cn_dev);
+err_1:
+ dev_err(&interface->dev, "out of memory\n");
+ return error;
+}
+
+static void cntouch_disconnect(struct usb_interface *interface)
+{
+ struct cntouch_device *cn_dev = usb_get_intfdata(interface);
+
+ usb_kill_urb(cn_dev->irq);
+ input_unregister_device(cn_dev->input_dev);
+ usb_free_urb(cn_dev->irq);
+ usb_free_coherent(cn_dev->usb_dev, 8, cn_dev->data, cn_dev->data_dma);
+ usb_set_intfdata(interface, NULL);
+ usb_put_dev(cn_dev->usb_dev);
+ input_free_device(cn_dev->input_dev);
+ kfree(cn_dev);
+ dev_info(&interface->dev, DRIVER_DESC " now disconnected\n");
+}
+
+static struct usb_driver cntouch_driver = {
+ .name = "CNTouch",
+ .probe = &cntouch_probe,
+ .disconnect = &cntouch_disconnect,
+ .id_table = cntouch_devices,
+};
+
+module_usb_driver(cntouch_driver);
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
